That swan was just bloody showing off landing like that.........! Top show James.
@TheNarrowboatThatJamesBuilt
3 жыл бұрын
I know he was. He saw me come to an orderly stop with both feet stopping nicely and promptly without any fuss - then goes and does that. I’m sure he winked whilst doing it !
@markkasprzak995
3 жыл бұрын
I give the swans a 10 on the landing. Especially the flair at the end. The panels are looking great. You’ll have a fire in no time. Moving right along.
@TheNarrowboatThatJamesBuilt
3 жыл бұрын
Show Off’s !
@stevearchtoe7039
3 жыл бұрын
Yeah that was me with the router comment. Lol. Sorry James but you had me cracking up!
@TheNarrowboatThatJamesBuilt
3 жыл бұрын
I honestly couldn’t imagine a scarier thing to do. Literally the start of a horror scene !!
@penneynoss9552
3 жыл бұрын
Water skiing swans awesome thanks for slowing that down 🥰 great video. The boat is coming together ☺️
@jawngoosen
3 жыл бұрын
Great videos James. Your shirt matches the tiles really well. Cheers from Cape Town South Africa :) Please put a coaster over your mug :)
@TheNarrowboatThatJamesBuilt
3 жыл бұрын
Hey there !! Love Cape Town !! That shirt / tile combo was unintentional and I’ve had strong words with the wardrobe department!! Heads will roll for this !!
@grahamlewis6062
3 жыл бұрын
James. You’re getting really good at this vlogging thing, and not just on your hard work building, but just who you are. Lots of folks routing for you as you persevere The SLO-mo of the swans was terrific 😃👍🏻. I often see a pair where I am (near wigan canal) landing, taking off is fantastic too, I keep thinking they will run out of canal before they lift off, and the sound of their wings as they fly overhead is amazing too. You’ve really started something there now . And we’re they really ducklings at the beginning- already !!? Joan So looking forward to seeing your stove lit it will bring ‘boat’to life! BTW you sure gonna need a big tools locker - lockup- somewhere!
@adds91
3 жыл бұрын
Fascinating to see the swans ‘water skiing’ on the water as they land, hadn’t a clue they did that
@MsBluemoth
3 жыл бұрын
You could do with a travel mug for the lid to keep the bits out and of course the warmth! It's looking good though! Happy birthday Tracey and nice flight of the swans!
@aussiechickonaboat4187
3 жыл бұрын
As usual great video James. I really loved the slo-mo of the swans landing(?) I had a whole family of them do that the second night I stayed on my boat right next to me, was just heading to bed and wondered what on earth the noise was. I looked and they were all staring through the galley window at me 🤣🤣🤣
@TheNarrowboatThatJamesBuilt
3 жыл бұрын
That’s amazing - I can’t wait to see that stuff from my galley window. All I can see if a skip full of shite !!
@TheBeeryBoater
3 жыл бұрын
What another productive and an electrifying day you’ve had today. At least you weren’t just swanning around all of the time.
@TheNarrowboatThatJamesBuilt
3 жыл бұрын
Oh very good
@suecordingley538
3 жыл бұрын
The boat is coming on great James! Nice video 😃👍🏻
@MrTheanalogkid
3 жыл бұрын
Progress-progress-progress... And that swan footage was the best thing I’ve seen on KZitem today👌
@TheNarrowboatThatJamesBuilt
3 жыл бұрын
Oh I’m glad you liked it!! They’re beautiful
@markcooper9708
3 жыл бұрын
Looking forward to the 100th episode your boat boat is now part of my day 😊
@SC-oz4qv
3 жыл бұрын
Every time there’s a cutting tool come near the dinette I hold my breath. I can’t help it. I know you’re not that daft James. Lol
@TheNarrowboatThatJamesBuilt
3 жыл бұрын
So do I which doesn’t bode well !!!
@TheNarrowboatThatJamesBuilt
3 жыл бұрын
I am that daft
@iancox6341
3 жыл бұрын
@@TheNarrowboatThatJamesBuilt You made us laugh....
@ronwebster4408
3 жыл бұрын
Hi James , yet another arrow to your bow, getting those swans to land right in front of your camera was a piece of Air Traffic Control Genius. All the rest is good too, Well done, Stay awake my friend. (PJ)
@jonnyisgood
3 жыл бұрын
Nice 1 James as always, the clip of the swans, fantastic well done you.
@christinegibbins6105
3 жыл бұрын
Thanks James all good with me, love the swan video, just magic. You take care and don't work all night!!
@mranthonye
3 жыл бұрын
It is great when you have the right tools James. Stay safe and looking forward to the one hundredth upload
@kevinturner3824
3 жыл бұрын
Hi James looking good. Can you check that the lights are in correct place, looked like the board was 90deg out. Dont want you trying to put it up like last time lol Kev
@NarrowboatWill
3 жыл бұрын
That's a neat wiring job. Quality wire as well. Nice
@TheNarrowboatThatJamesBuilt
3 жыл бұрын
Thanks Will - I’m happy with this circuit. The cable is fairly cheap at 27p a metre so it’s well worth the decent stuff.
@terrywaite6756
3 жыл бұрын
James..when you get round to installing the electric wall sockets will you be incorporating usb sockets. It can be very useful to have them at different points on the boat. You are making terrific progress.
@TheNarrowboatThatJamesBuilt
3 жыл бұрын
Hi Terry Thanks for your comments - all my wall sockets will be usb because I’m not having any 240v - small USB ports all over the place.
@andyince
3 жыл бұрын
Another great vlog! Happy birthday Tracie! Its fantastic how yourself and the viewers interact on the channel, getting to be quite a community and we are all in it with you, Fantastic!
@TheNarrowboatThatJamesBuilt
3 жыл бұрын
Thanks Andy - yes I’m feeling it too!! I guess it’s good that it’s pretty instant. I got the request mid morning I guess so had the whole day to plan a few bits. Nice to sing happy birthday - haven’t done that in a while !!!
@andyince
3 жыл бұрын
@@TheNarrowboatThatJamesBuilt Wow! less than a days notice? that was really good of you to make that happen mate, credit to you!
@RelaxingsoothingMusic
3 жыл бұрын
Don't forget to get a carbon monoxide warning thing..for you're multi fuel. I had a mate that didn't have one......58mm cutter looks great!!
@amoore6981
3 жыл бұрын
Happy birthday Tracey!
@dozergyp
3 жыл бұрын
Coming along great, Love the nice fit of the ceiling lights, Keep safe 👍
@sarkybugger5009
3 жыл бұрын
Happy birthday, Tracey. I love swans, too. They're delicious! ;o)
@TheNarrowboatThatJamesBuilt
3 жыл бұрын
Mmmmmm swan sarnie
@ianlindsay8557
3 жыл бұрын
I do hope you paint the correct side mate.good vlog sir and looking forward to seeing flames tomorrow night.
@TheNarrowboatThatJamesBuilt
3 жыл бұрын
Come on then Ian, what BonJovi song would you like accompany the lighting of fire!!
@ianlindsay8557
3 жыл бұрын
Hi James hope your well .I really don't have a clue about bonjovi mate but Esther says blaze of glory!
@rotinkerbell
3 жыл бұрын
Oh my giddy aunt. Please stay behind, extra lessons on pitch, tone, and listening to each other. But we will have you ready for the London Phil Chorus by summer. Well done all.
@TheNarrowboatThatJamesBuilt
3 жыл бұрын
For 2 people inappropriately named John and Paul - there wasn’t a musical note between them !!! On behalf of your ears, I’m sorry. By the way, the song we were trying to reproduce was “happy birthday” - not sure if that was clear !
@jlucyb84
3 жыл бұрын
Great swan footage! Boat looking really tidy 👍
@paulbush8881
3 жыл бұрын
So pleased youre using the proper spot light drill bit hole cutter thingy
@TheNarrowboatThatJamesBuilt
3 жыл бұрын
That’s what the packet says it’s called!!! Much better - no risk to upper limbs, just fingers
@martinworrall5888
3 жыл бұрын
Paint the right side this time James 😃
@TheNarrowboatThatJamesBuilt
3 жыл бұрын
I might, let’s see
@geodun
3 жыл бұрын
And leave the wine till after it is up :)
@randoneur
3 жыл бұрын
When it comes to the mushroom vent cutout on the joint. Line up the two sheets and clamp them down on a board. Then cut with a hole saw. You'll get a nice semi circle in both sheets when you remove the clamps.
@TheNarrowboatThatJamesBuilt
3 жыл бұрын
May I remind I’m on a Narrowboat - there’s no chance I’m going to be able to line up 2 boards end to end even after cutting. Plan b
@JasperJanssen
3 жыл бұрын
@@TheNarrowboatThatJamesBuilt I suppose if you’re going to put trim around the edge anyway, a jigsaw cut in the round will probably be good and round enough.
@randoneur
3 жыл бұрын
@@TheNarrowboatThatJamesBuilt It looked like at 15:00 there was plenty of space to butt the next panel up, but I'm not up close and personal :-) You could clamp it to any spare scraps of wood you have lying around. Plan B I suppose is to mark each panel when in place before securing, and then use the old faithful jigsaw.
@TairnKA
3 жыл бұрын
If a "58" is large enough, you could cover your mug with a scrape piece? ;-)
@TheNarrowboatThatJamesBuilt
3 жыл бұрын
I covered my mug with a Screwfix catalogue then spent about 30 minutes looking for me brew !!
@iancox6341
3 жыл бұрын
@@TheNarrowboatThatJamesBuilt lol
@neilalderson7048
3 жыл бұрын
Nice 👍👍👍👍
@Orxenhorf
3 жыл бұрын
Might want to save yourself some headache by penciling in words on the pieces of wood as you're cutting them: fore, aft, port, starboard, top bottom. Would maje it a lot easier to keep track of when you go to painting and installation. You could even write on the paint before installation and just touch-up that area after it's in place.
@skinteastwood2358
3 жыл бұрын
Hi james when you are running a long length of cable use small pieces off off cuts off trunking lid to hold long cables in place while you complete.
@TheNarrowboatThatJamesBuilt
3 жыл бұрын
That’s exactly what I was doing today and it works a treat doesn’t it !
@101appsCoZa
3 жыл бұрын
you can use the router to cut the holes for the ceiling lights
@paulinegrace3215
3 жыл бұрын
love the magical water treading swans, were they gliding into your plinking of Yellow? You always manage to find a way through the challenges which is good to see. Most impressed by the 58 whole saw, not terrified of you loosing a limb lol! Who doesn't like a satisfying clunk? Lol! Happy birthday Tracey 🤗
@TheNarrowboatThatJamesBuilt
3 жыл бұрын
I’m chuffed that you recognised the opening few bars!!
@paulinegrace3215
3 жыл бұрын
@@TheNarrowboatThatJamesBuilt either I have a good ear or you are good at playing... Or we're both just fabulous lol!
Once again you hit it out of the park You’re really good at this
@TheNarrowboatThatJamesBuilt
3 жыл бұрын
What bit are you referring to if I may ask ??
@quebot1111
3 жыл бұрын
@@TheNarrowboatThatJamesBuilt The swan video hehe
@quebot1111
3 жыл бұрын
@@TheNarrowboatThatJamesBuilt and the shower where it curves. It really looks good
@chrisa1601
3 жыл бұрын
I noted you took your measurements from your partition wall,, should you not have taken it from the leading edge of last board. save a small infill and will bring you back from mushroom vent as you first intended. As your partition wall is the width of your CLS i believe.
@TheNarrowboatThatJamesBuilt
3 жыл бұрын
I did think that but it would only move back 50mm which would actually place the board edge in a worse position on the mushroom vent. This way the cover of the vent will have a good bite on both boards
@michaelburns6197
3 жыл бұрын
Does your dinette ceiling board meet up with your bathroom ceiling board? Just paint both sides and be done with it.
@leona_devon
3 жыл бұрын
The Swan footage was awesome
@MsVanorak
3 жыл бұрын
Water-skiing with just their feet. :D
@bobmclaughlin8633
3 жыл бұрын
good luck
@J1mbo888
3 жыл бұрын
Top Singing :-)
@nate8551
3 жыл бұрын
Is that stretch classed as a wide canal which would be suitable for wide beams?
@TheNarrowboatThatJamesBuilt
3 жыл бұрын
You can get wide beams up here but you can’t get a wide beam through Foxton - or loads of other spots in the midlands
@donaldwood9613
3 жыл бұрын
Things must look different from Downunder. I thought the milled edges were by the sidewall and that you needed to measure from the sidewall not the bathroom wall because you would be turning the board at right angles to fit across the boat in one piece. Good thing it is you building and not me!
@matthewwoodward2738
3 жыл бұрын
James just two words. Travel mug. Lol. Get something with a lid else you will be 50% spray foam soon
@ebujvt65
3 жыл бұрын
Snapped a picture of swans. Do you mind if I do a painting or dog. Of them
@TheNarrowboatThatJamesBuilt
3 жыл бұрын
Not at all
@bradleysteel3526
3 жыл бұрын
Hello James been watching you bing watching great work you doing Can I as what 12 v wire you using for the ceiling lights as I am doing my lights soon Thanks
@johnneal7832
3 жыл бұрын
Bit safer using that hole cutter than that other lethal thing eh lol
@TheNarrowboatThatJamesBuilt
3 жыл бұрын
I know !! And a fraction of the time and dust. Happy !
@arcllight6561
3 жыл бұрын
Ep 99 their those of us english whom do not subscribe to the de funcked eu metric rules keep to the IMPERIAL english measure as does the USA nice one james
@alphabetaone970
3 жыл бұрын
Have you put your order in for your full roast dinner for tomoz.....?
@TheNarrowboatThatJamesBuilt
3 жыл бұрын
There’s no way I’m having the time for that tomorrow. Paul better be having a bloody slice of toast !!!
@davidapp3730
3 жыл бұрын
When was this videoed? They look like young ducks. Do they hatch ducks that late in the year in the UK?
@EnyawYorlig
3 жыл бұрын
Clean grout and adhesive off tiles using methylated spirits and a scotchbright washing up scourer. (The green plastic stuff)
@TheNarrowboatThatJamesBuilt
3 жыл бұрын
Thanks for the tip !
@sallyanne2103
3 жыл бұрын
Great video James, glad to hear you’re going to paint the right side of the panels 🤣 looking forward to the 100th video. Happy Birthday Tracey 🥳
@pwatsonuk
3 жыл бұрын
Fingers crossed you beat Paul! Quick electrics question if I may? Why run individual circuits for each lighting 'room' rather than a run of 12V along the boat and tap off for each area? I can see that boats with halogen lighting might need this to keep the loading down but not LEDs? Is it to remove inaccessible joints perhaps, through crimps or Waco connectors would be OK?
@kwattsMacavity
3 жыл бұрын
When I was having my led lights fitted my electrician said no more than six in each batch. In my case not always switched on together.
@michaelburns6197
3 жыл бұрын
Also you don't want to lose all the lighting on the boat if one fuse blows.
@bigKDL
3 жыл бұрын
Hi James only me again my next tip is when (if you haven't already) buy your chimney you must get a double wall one to stop all the horrible tar running down the side of your boat when your using your fire also as with most things the longer the better as it makes the draw on the fire stronger giving you a better burn and you use less fuel
@TheNarrowboatThatJamesBuilt
3 жыл бұрын
Oh yeah size matter does it Big ???? I’m going for a 70cm chimney - just looking for one which doesn’t break the bank
@michaelburns6197
3 жыл бұрын
@@TheNarrowboatThatJamesBuilt There'd be a lot less tar to worry about if you used an insulated flue and chimney.
@chevyimp5857
3 жыл бұрын
Thanks for posting.. Are the dinette lights wired in series?
@TheNarrowboatThatJamesBuilt
3 жыл бұрын
No probs, yes they are
@michaelburns6197
3 жыл бұрын
@@TheNarrowboatThatJamesBuilt I think they are in parallel, you've got positive and negative visiting each light, with the switch in series on the source side of the positive.
@clivew9207
3 жыл бұрын
@@michaelburns6197 Yes they're in parallel I'm sure.
@cskeise
3 жыл бұрын
💙👊😎
@bigKDL
3 жыл бұрын
This time it won't matter which side you paint because they are the same measurement each side
@TheBeeryBoater
3 жыл бұрын
@SarkyBugger will sue you for saying that!
@TheNarrowboatThatJamesBuilt
3 жыл бұрын
Keith - you’re spot on. I giggled to myself once I knew!! Bang on pal 👍🏼
@JasperJanssen
3 жыл бұрын
Theoretically, anyway.
@pocketchange1951
2 жыл бұрын
👍👌🇨🇦❤
@ebujvt65
3 жыл бұрын
Did u delete number 100
@TheNarrowboatThatJamesBuilt
3 жыл бұрын
There was an issue - it’s being re-uploaded now. Sorry
@johnaston6440
3 жыл бұрын
James next video’s not playing
@TheNarrowboatThatJamesBuilt
3 жыл бұрын
It’s on its way - this time without copyright issues with Ringo Starr !
@ebujvt65
3 жыл бұрын
Put something over your coffee tea cup to keep guck out
@johnmccormick4055
3 жыл бұрын
You don't lights on celling wall and under the windows lot better I been there done all this need a chat email me OK
Пікірлер: 121