Good work, keep it up. Could recommend for simple things like a shelf/support just build it out of steel/alu etc, as it ends up allot easier/quicker for most people.
@thesimproject73
Жыл бұрын
I've got something else in the works now that will render the shelf unnecessary 😉
@asklapios
Жыл бұрын
thank you for inspriation
@rubixkube2555
Жыл бұрын
Very Good ! Thank you
@buckrodgers770
2 ай бұрын
Could I ask.... what did you find was the best way to cut the breadboard for the encoders? Thanks
@thesimproject73
2 ай бұрын
Used a drywall knife. Nice solid blades in a good handle. Score it a few times with a steal ruler as a guide. Then break with your hands. Should come out nice and clean.
@buckrodgers770
2 ай бұрын
@@thesimproject73 Thanks for the reply bud....I'm working this project right now and was having trouble with that part. Take care ✌️
@TRICKY10666
Жыл бұрын
Nice,looks decent 👍
@lalotong
6 ай бұрын
Hi! 8:13 How did you set that button to change the place for the checklist? I have a stream deck plus and I would like to see if I can assign that function Thank you for your help!
@thesimproject73
6 ай бұрын
The Hjet has a whole bunch of custom LVARs that can be accessed via simconnect. I use Spad.Next and Mobi-Flight. As iMSFS doesn't have a default key binding for this one They have an Excel sheet with them all on their Discord. But I think the one you are looking for is H:AS3000_TSC_Vertical_2_MiddleKnob_Push
@mariuszw76
9 ай бұрын
Fantastic Video. I have some questions regarding the wiring. Is there another way to contact you? Thanks
@thesimproject73
8 ай бұрын
I'm glad you enjoyed it. I am working on an improved version that is much more realistic looking with the real unit... you can find me on discord as CXA007
@jampor207
Жыл бұрын
One question: Wich version of Windows are you using? because I have Win 11 and I can't find the way to set the secondary display as a stand alone touch screen, even following all the instruction on how to set a tablet via control panel... doesn't works (works like a control pad for the main screen). so I'm curious to know if you are using the same OS and if you have found a solution. Thanks.
@thesimproject73
Жыл бұрын
I'm on Windows 10 still, my CPU is too old for Win11... But I've had the same problem in Win10 as you are talking about. The instructions windows gives is not super clear (mostly because the writing is super small and hard to see). When your in the setup and all your monitors go white. Make sure the black text is displayed on the touch screen and all the others are just a white display. Pressing the enter key, will cycle the black text between the monitors. Its the step I always miss, and by missing that step. When you try the touchscreen things move on your primary display. Let me know how you make out.. 😉
@jampor207
Жыл бұрын
Thanks for your answer!! unfortunately I've allready tried all that multiple times, looking close that the text was on hte correct display before touching it... but nothing, once I touch the small display the setup close it self and the touch still works as a trackpad for the main sceen (like a laptop trackpad). I've also tried changing USB cable and port and changing Display cable and port (although those should not have an impact on the touch settings) but still nothing. It is also not a driver or HW incompatibility issue because if I set as a primary monitor the 7" one and as secondary my main 27" monitor, and then I repeat the "tablet setting" of Win 11 now the touch screen works fine on the small display, but of course It can't stay set like that. I've asked you abuot the OS because there are videos like yours where Win 10 seems to work fine, but I cannot find video with win11.
@thesimproject73
Жыл бұрын
@@jampor207 sorry to hear it's such a pain.. Glad I'm not on Win11 I guess 🙄
@buckrodgers770
Ай бұрын
Could I pick your brain again? Got the arduino set up fine. Headers connected and wires as well. My question is on the schematic sheet step 4 it shows the green connections is that basically a solder bridge between pins? And also I see the black line ?? Is that to ground the Charlie pins? Or if you have a tip on how to ground the Charlie pins on the encoders I'm getting closer to finish.
@thesimproject73
Ай бұрын
Careful, not a lot of brain to pick at 🤣.. But yes, the green lines are a bridge between the device and the wiring pins, and black line is the common ground - GND pin on the Arduino to the encoder Charlie pins
@buckrodgers770
Ай бұрын
@@thesimproject73 Thanks so much.
@buckrodgers770
Ай бұрын
I got the encoders solderd in fine....had to use a foam pad with holes to hold things upside down. I'm attempting to solder the 90 degree header pins to the board the encoders are on. If I put them in and turn it upside down they fall out...I don't think you can solder top down because I'm afraid I'll burn up the little plastic piece. Any advice? How did you get those 12 headers on? I'm new to soldering so I'm trying my best. Thanks bud
@thesimproject73
Ай бұрын
I bought a 3rd hand off Amazon to hold everything well soldering it.. Search STANZ Basic Helping Third Hand with Magnifier. They work winders.
@buckrodgers770
Ай бұрын
@@thesimproject73 I do have a helping hand with 2 gator clips and a magnifier I put the pins In turn it over and they all fall out. Maybe use the clip to hold it upside down and the other to hold the pin? Thanks for your continued advice. Having a heck of a time getting those 90 degree pin headers in.
@jimclayton87
Жыл бұрын
Tried this, great little addon but huge hit on the frames, not worth the hit with my setup
@thesimproject73
Жыл бұрын
really? What's your setup? I'm on an old i7 6700 and it doesn't seem to upset my FPS at all..
Пікірлер: 26