as requested I hope this answers your questions on the Tone Room by Vox.
@fainnball8694
2 жыл бұрын
I found out it was a faulty cable
@tut2507
4 ай бұрын
I just bought a floor model from Guitar Center here in the St. Louis area. $200. Thank you for this video. Very helpful
@waynekieft4952
3 жыл бұрын
Best amp out there at the moment in my opinion!Got the 100 watt and it is amazing!
@ZooScott
2 жыл бұрын
ultra VOX 💥 🎯 🥁 ROCK coNt ROLL ✅ 👀 ❤️.
@kennyroadknight1771
3 жыл бұрын
I’m on a pension tried to buy this amp from Bax music Folkstone. It didn’t arrive when I contact them they’re in Holland and no idea (due to brexit)when it might arrive. Then the real reviews, my daft, say it’s what they do fraud all over broken if stuff arrives. So I’m well stuffed start saving again and should get one by the Summer hopefully. Please warn the good people not to risk buying from Bax music Eindhoven. I’ve got the little orange battery in the mean time,it’s not terrible but this experience has left me a bit floors tbh. Love your channel T. ✌️🎸✊
@GuitarsandDrones
4 жыл бұрын
Had the VT20x for a year now, is cool amp. Also have the VT30. VOX did a great job on this line of amps, great info, subbed 👍 The pedal is worth getting, maybe you can find one used like I did.
@BrentHutchinson
4 жыл бұрын
Thanks.. yeah I'll keep my eye out for one.
@grahamhutton8736
4 жыл бұрын
cheers Brenty buddy. much more informative than any others. When I downloaded tone room i didn't get anything near the presets, but i saw that connected to the amp it synchronises and brings up loads more presets as you showed. thanks matey.
@BrentHutchinson
4 жыл бұрын
A pleasure!
@BigDadDom
Жыл бұрын
Nice easy explanation, really helpful. Cheers!
@fluffster61
4 жыл бұрын
This was so helpful. Thank you.
@unofficialbhb7284
4 жыл бұрын
Many thanks for filming and sharing M8ty....... Will try and watch this with Maria before your scheduled appearance tonight ...... M&MX / Mark T X ♥
@leodanryan966
4 жыл бұрын
Glad to see you are getting some use of this one.
@BrentHutchinson
4 жыл бұрын
Yeah man would be a lot more if I could gig :)
@keithreynolds6359
2 жыл бұрын
Just picked up a vt20x for peanuts 2nd hand. Great little amp. So versatile. Eye out for a foot switch now. Highly recommend
@keithreynolds6359
2 жыл бұрын
Great video by the way!
@anthonyjeffreysantos3206
2 жыл бұрын
I just bought VOX VT40X this is helpful.
@inanc1680
2 жыл бұрын
is that a good amp? And how can i setup the tone room?
@unofficialbhb7284
4 жыл бұрын
Watched now as didn't get a chance before last night's livestream...... Sounds WELL meaty !!!!! M&MX / Mark T X ♥
@BrentHutchinson
4 жыл бұрын
Cheers mooshdy
@harryr3ful
7 ай бұрын
what mode were you in when you did this? I get all confused by the 3 different modes and what you do with each.
@bradletica9445
Жыл бұрын
I have all the correct cables and adapters however it won’t connect to my iPhone. Any suggestions?
@YumeBasil
Жыл бұрын
How do I connect it to my pc? Cause I used the USB into the pc and setup the midi driver but it won’t detect the amp.
@user-hv4vj2ki8o
Ай бұрын
Reboot
@f10nn02
4 жыл бұрын
This amp is great but every time I switch amps/sounds between let's say cocaine and then maybe the trooper the volume goes wayyyyyyy up on the new one I selected. It's so frustrating bc every time I change how the amp sounds my ears bleed! Does anyone know how to fix this??
@BrentHutchinson
4 жыл бұрын
Yeah it's an issue you can balance all the volumes in the tone room
@f10nn02
4 жыл бұрын
@@BrentHutchinson thanks yeah I noticed what you have to do is alter the volume and save your tone and it'll be that volume every time you switch to it
@user-iz7md1th5w
7 ай бұрын
I also noticed it, is it the same what happened if you have the foot switch, I didn't have foot switch yet
@ItZChazzyGaMeZ
3 жыл бұрын
i've been trying for months now to connect my vox amp to this software but it just wont detect it, anyone know how i can fix this? i would greatly appreciate it
@BrentHutchinson
3 жыл бұрын
It is probably the cable it has to be a data cable not just a charging cable
@ItZChazzyGaMeZ
3 жыл бұрын
@@BrentHutchinson i’ve used multiple cables but it just doesn’t work, it got it to work once a couple weeks ago but after that it just wouldn’t connect again
@ral0958
3 жыл бұрын
Try all of the usb ports on the pc
@tomblaze2
2 жыл бұрын
If like to see more about setting up gig ready presets
@noraaaa5819
Жыл бұрын
Hi! I bought the vox vt20x but I can’t connect it to the tone room app. Do you know how to connect it?
@reillygallagher704
8 ай бұрын
Does my pc need to be connected to internet to use Tone Room after TR is downloaded?
@Jules551
2 жыл бұрын
I was wondering if you could help please , I bought one of these amps , I m new to the guitar , so the amp was working fine then all I put the jack lead but no noise to the guitar , I can hear the amp is on , got another guitar lead but nothing , any advice would be fantastic thank you .. jules
@gen8720
Жыл бұрын
Can I use this amp as an interface in a program such as GarageBand or Logic Pro x to record ?
@mka70
4 жыл бұрын
Thanks for the demo!!! It's a bit hard to find videos that go into so much depth! I've just bought the 50w version, but yet to d/l tone room (the wife is insisting I keep it until my birthday next month.....*sighh*. Anyway, what I really wanted to know was...when you use tone room and plug into USB....does that override the amp controls, or should you set everything to a clean sound first? I currently have to do that with my Line6 pod. Sorry for asking such a basic question! Cheers!
@BrentHutchinson
4 жыл бұрын
No it doesnt you can still use the controls on the amp when plugged into Tone Room.
@simonrowlands8031
4 жыл бұрын
Would imagine the Walk preset is Pantera bud
@BrentHutchinson
4 жыл бұрын
Ahh nice one :)
@goffra1794
2 жыл бұрын
Hello! I have a problem connecting to my computer. When connecting the cable, the computer writes that the device is not recognized. all drivers are installed. windows 10. What could be the problem? should I buy a new cable?
@BrentHutchinson
2 жыл бұрын
yes it needs to be a data cable :)
@goffra1794
2 жыл бұрын
@@BrentHutchinson thank you! it doesn't work with the new cable either) apparently there are problems with the amplifier)
@ferkro344
Жыл бұрын
@@goffra1794 you fix the problem?
@TheKeyblade818
3 жыл бұрын
what do you think of the headphone out? Is it any good?
@BrentHutchinson
3 жыл бұрын
It's not great. It bypasses the valve stage too.
@TheKeyblade818
3 жыл бұрын
@@BrentHutchinson Thats what I thought. Oh man it's so difficult to find an amp with a decent headphone out.
@Tom-Raw
12 күн бұрын
Whats this software that comes with it?
@BrentHutchinson
11 күн бұрын
It is their own
@hobieray8819
Жыл бұрын
Will this amp take a looper pedal?
@vittofuca
4 жыл бұрын
Do you know how can I connect the the tone room to my phone?
@lydiangandalf
4 жыл бұрын
I used a micro usb to usb cable which I connected to the amp, then I used a usb to lightning adapter which I plugged into my phone, so really just use a micro usb cable and an adapter for whatever phone you've got
@axelalex
4 жыл бұрын
Yeah. I have tried to do that but it doesn't seem to work.. I bought an adapter from USB micro to USB and then I used the data cable.. I tried it on my Vox VT 100x and with two different android phones , but nothing yet..
@tylersteinke7152
2 жыл бұрын
That tone room app, does it have the ability to record what you are playing on it? Thankyou
@BrentHutchinson
2 жыл бұрын
No afraid not
@manuelbarreiras7702
3 жыл бұрын
Hi! I have a question before i buy this amp : I have heard that using pedals in modeling amps is not the best idea because it creates a very distorted sound but if the modeling amp is without effects and on a clean channel and if I use the pedal, is the problem treated? Is it like a normal amp? Btw I have the pedal Joyo AcTone
@BrentHutchinson
3 жыл бұрын
You can bypass the whole thing and just use it as an amp..its pretty cool
@manuelbarreiras7702
3 жыл бұрын
@@BrentHutchinson can you explain how do I make it pls?
@manuelbarreiras7702
3 жыл бұрын
@@BrentHutchinson pls it would really help me
@lisandro325
2 жыл бұрын
@@BrentHutchinson how do i bypass the whole thing
@kkkwhhh
2 жыл бұрын
@@lisandro325 think there's button on top left you press next to the amp selector switch. I'm thinking of buying this myself.
@phillgriffiths8752
4 жыл бұрын
Can you add an effects pedal in front of the vox I have a Moore GE100 and would like to know if it would work?
@BrentHutchinson
4 жыл бұрын
Yeah I have gigged it with my pedal board in front. You can bypass everything and use it as a clean amp. Sounds pretty good and valve like
@tonymadad9555
4 жыл бұрын
@@BrentHutchinson how to bypass amp ?
@skylarmobis4681
2 жыл бұрын
what if i will use my own pedalboard distortion,does it still sounds Good??
@BrentHutchinson
2 жыл бұрын
Yes I used external tube screamer and wah with it sounded really good.
@Ivaka12
Жыл бұрын
In which mode does the AMP need to be in order for the software switches to reflect?
@cosmoschtroumpf
Жыл бұрын
Just "On"
@dah960
Жыл бұрын
@@cosmoschtroumpf last thing moved is in control. change the knob on the amp it changes whater was dialed or if change amp model. click something on tone room then it controls the know or picks the amp or whatever.
@TheLambLive
4 жыл бұрын
Astonishing that with all of that capability, they didn't add a simple 2in-2out interface on the USB. It's already doing all the A/D/A conversion, so it's literally just software.
@BrentHutchinson
4 жыл бұрын
Maybe there is a way
@Bobby59
3 жыл бұрын
This vs Peavey Vypyr?
@manuelbarreiras7702
3 жыл бұрын
Does the software sound gets out from the fisical amp? If yes, do I only need to connect my pc to the amp by the USB cable?
@BrentHutchinson
3 жыл бұрын
unfortunately you can only use the USB cable to adjust the amp settings
@manuelbarreiras7702
3 жыл бұрын
@@BrentHutchinson but for example: I change one of the bank presets and I put a trebble booster and a vox AC30 on the software and I save to the amp. Do I need to have the cable connected to produce that sound or does the amp memorize the presets?
@BrentHutchinson
3 жыл бұрын
@@manuelbarreiras7702 I see yes the amp will remember your setting
@martinpadel7775
3 жыл бұрын
so you only need to install the tone room and that's it? the amp starts to give you those sounds modeled by the program?
@BrentHutchinson
3 жыл бұрын
yeah download tone room its free and connect the amp via the usb. You can then save your settings to the amp.
@martinpadel7775
3 жыл бұрын
@@BrentHutchinson did it. Thanks dude!!
@maxpower2299
4 жыл бұрын
Trying to workout how to turn down the volume default for the presets.? anyone know??
@BladeDoomer86
4 жыл бұрын
Maybe it can be done in Tone Room, or just do like me and lower power level before switching amp models. You can also set your own presets in theBanks section, very handy and it saves the volume level!
@victorkunchev6438
4 жыл бұрын
So, the amp is connected to the computer and the guitar should be plugged into the amp? Does the channel matter?
@BrentHutchinson
4 жыл бұрын
No you can use any channel you want
@victorkunchev6438
4 жыл бұрын
@@BrentHutchinson Much obliged.
@JohnMicius
2 жыл бұрын
my vox vt40x does a "pop" noise when I turn it on what could that be?
@AndrewAHayes
4 ай бұрын
In the manual it says to turn the volume to 0 before turning on, I guess this to stop the pop.
@JohnMicius
4 ай бұрын
@@AndrewAHayes It still pops
@Jonobrook123
4 жыл бұрын
Brent can it be used as an acoustic amp?
@BrentHutchinson
4 жыл бұрын
I suppose it could as you can bypass everything and just use it as a regular amp
@Jonobrook123
4 жыл бұрын
@@BrentHutchinson cool when u get chase will u throw an acoustic in and try it? no need to film ..just let me know if it sounds any good ..
@fainnball8694
2 жыл бұрын
Does it have to be connected to the tone room before you can start playing? I just got one and there is no sound.
@BrentHutchinson
2 жыл бұрын
No it doesn't... Tone room is a tool to program sounds...
@nassermetalhead5212
Жыл бұрын
First,install driver,then instal tone room
@petergraham9267
3 жыл бұрын
Hmm.......my ToneRoom looks nothing like that when I installed it............your's has loads of stuff shown; mine is empty........how did you get loads of stuff in there?
@BrentHutchinson
3 жыл бұрын
Maybe try uninstalling and re installing ?
@detlevcohrs4319
4 жыл бұрын
Hi, a nice Amp is the Software includet in the Price or is this extra. LG Detlev
@BrentHutchinson
4 жыл бұрын
Included mate
@detlevcohrs4319
4 жыл бұрын
@@BrentHutchinson Thank you
@kolbytaylor9504
3 жыл бұрын
How do install the drivers so that it recognizes my amp
@BrentHutchinson
3 жыл бұрын
You download box tone room
@scoresandflames
3 жыл бұрын
If your Windows doesn't detect/connect your amp even though it's connected via USB, you might have too many USB/MIDI audio devices installed/uninstalled/registered by Windows. There is a utility included to uninstall USB/MIDI devices in the Tone Room USB driver package. Install the driver package, but I suppose you already did. Launch that uninstall utility (it sits in the Start Menu created for Tone Room) and make sure you remove some of those unused devices. You can recognize them by their name: the name either includes "invalid" (means a device was uninstalled but its entry remains in the list) or they are greyed out (means they were installed and used but currently not connected). Your goal is to have at least one empty slot in the first 10 slots so that Tone Room can link up your amp and the driver as well. Once you have one empty slot there, close the utility, (you might have to reinstall the drivers, can't recall that step anymore) launch Tone Room and it should detect and connect your amp via USB.
@guenterbortz5957
4 жыл бұрын
Sadly you can't record that sounds direct, isn't it? So the PositiveGrid Spark for homerecording??? Aaah no, my Line6 Pod 2.0 do the job 😀😷☮️
@BrentHutchinson
4 жыл бұрын
yeah it is a shame as there is some really good tones there. Of course you can just mic the amp but it does colour the sound so more fiddling. The Line 6 is more than good enough to produce the tones too and there are always VSTs too. Lots of options these days. It would do them good to sort it really apparently its just a software thing.
@lydiangandalf
4 жыл бұрын
tone room wont find my amp even though windows finds it. Can I fix this?
@BrentHutchinson
4 жыл бұрын
I would try a different usb lead
@samuelmontano9968
4 жыл бұрын
can you record with toneroom?
@BrentHutchinson
4 жыл бұрын
Unfortunately not I am looking for a solution.
@mc30052
2 жыл бұрын
Thx for the vid, but.... this is the Most ugly interface ever. This sound like a 2000's software. Mb i am too focused on design, but it does not give any desire to use it. Last version is from 2017... no update since.
@BrentHutchinson
2 жыл бұрын
I with you on that I have since moved on from this now. Still a good amp though IMO
@conloubser
4 жыл бұрын
Sorry, this is not a guide at all. It's more of a 'first look messing around with no plan' video. I learnt nothing.
Пікірлер: 114