You have quite a challenge Mark! Thanks for the shout out and glad the oil filter decals worked!
@MarkBatsonHobbydude007
2 жыл бұрын
Thank YOU brother!!! You da man!! .......again!!!
@TheLukaCeeChannel
2 жыл бұрын
I'm glad you like what you got. It's great that you got a set of Frank's resin valve covers. He had MAD respect for you and would be proud and honored to have his parts on your Buick build. This is. Going to be a great Lumina build. Something so different
@MarkBatsonHobbydude007
2 жыл бұрын
Big thanks Matt!! I am honored to have pieces of Frank's great work! (and yours!!) As to the Lumina, I just hope I can pull it off! The wheels are still the biggest challenge.
@petermerz2704
2 жыл бұрын
Nice kits. Quite the challenge to detail it. Thanks for sharing Mark. 😎🇨🇦
@MarkBatsonHobbydude007
2 жыл бұрын
Thanks for watching buddy!!
@calvincooley1074
2 жыл бұрын
Always felt that the Lumima was a deathnail where my being a fan began to end.
@MarkBatsonHobbydude007
2 жыл бұрын
Thanks Calvin!! The Lumina never bothered me as much as the later 90s cars did.
@davidparsleyscustomscaleemerge
2 жыл бұрын
The people in this hobby are ABSOLUTLY FANTASTIC!
@MarkBatsonHobbydude007
2 жыл бұрын
Yes sir brother!! There are QUALITY folks in our hobby!
@THROTTLEPOWER
2 жыл бұрын
Very cool, love oil filter decals! 🙂 Always on the hunt for them as there aren't many out there and adding them makes a HUGE difference. 👍👍 The parts from Luka look great. Looking forward to the Lumina build Mark..... 🙂😊
@MarkBatsonHobbydude007
2 жыл бұрын
Many thanks my friend! I agree! Oil filter decals make a big difference! Have an awesome week buddy!!
@robertlanders3803
2 жыл бұрын
Thats what this hobby is all about, challenging yet fun. Can not wait to see all the videos on this build. I know that it is going to be fantastic.
@MarkBatsonHobbydude007
2 жыл бұрын
Thank you buddy!! I hope so!
@TerryWilsonModels
2 жыл бұрын
You are absolutely fearless.... love to see how your mind works.
@MarkBatsonHobbydude007
2 жыл бұрын
LOL! Thanks brother!!
@gregorygolden1296
2 жыл бұрын
You sure got your work cut out for ya. We all know it will be mind blowing when it's finished. Sure wish the companies that make models would watch your videos, and go to you for advice on how they could make them better. Some of the stuff they make, could sure use some of your knowledge. Again, thanks for the great video Mark.
@MarkBatsonHobbydude007
2 жыл бұрын
Thanks Greg!! I appreciate the kind words big time!
@BarnacleBrando
2 жыл бұрын
Good Lord! Us mere mortals just sit back in awe. 😂 Can’t wait to see your progress!
@MarkBatsonHobbydude007
2 жыл бұрын
Thanks my friend!!
@truedeadman
2 жыл бұрын
Looking forward to seeing this come together
@MarkBatsonHobbydude007
2 жыл бұрын
Thank brother!! Me too! ....... I hope., LOL
@garyparker2969
2 жыл бұрын
😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱 INCREDIBLY INSANELY MIND-BLOWING OUTRAGEOUSNESS In 1/32 Scale No Less. I'll DEFINITELY Be Watching For Updates On This Project Mark . God Bless The 007 Household 👍👍 Gary.
@MarkBatsonHobbydude007
2 жыл бұрын
Big thanks Gary!! Blessings to you and yours as well!!
@garyparker2969
2 жыл бұрын
👍👍
@ronstewart9792
2 жыл бұрын
Wow a full detail in 1/32. That will be awesome Mark. Those Petty decals are awesome. Great video. Ron
@MarkBatsonHobbydude007
2 жыл бұрын
Many thanks Ron!!
@drppr76
2 жыл бұрын
That's very interesting on how the monogram kit has a fold up chassis/roll cage- and don't take take any bs from those shrubs
@MarkBatsonHobbydude007
2 жыл бұрын
Yep, they are interesting little kits for sure! As for the shrubs, that's the second time this summer they got me. Amanda says I may get a suit of armor for Christmas. LOL!
@kevinwooldridge8261
2 жыл бұрын
Well that's just outstandin'Mark!! You're heading down my favorite scale rabbit hole now brother 😁. I'm just swinging at the fences here but the wheel/insert detail might be available in the slot car world as well. There's getting to be a lot of resin-casting in that corner of the hobby these days. I'm really excited to see you build up the Lumina cause I've already snagged up most of the classic stock cars that Carrera makes(late 60's/winged cars)! This also gives me a great excuse to Gmail you a few photos of the latest project on the layout 🤠. Thanks for sharing brother and blessings to you and Amanda 🙏🇺🇸✌️🇺🇦
@MarkBatsonHobbydude007
2 жыл бұрын
And a big thanks to you my friend!! I've be checking a lot of slot car goodies today! A lot more bodies out there in 1/32 than I thought! Really cool goodies! Y'all have an awesome week buddy!! God bless!!!
@themodelhobbyist
2 жыл бұрын
I don't know anything about NSCAR but 3 years would be answer and of course I was wrong LOL good video I enjoyed watching. 🙂 Thomas over at The Model Hobbyist
@MarkBatsonHobbydude007
2 жыл бұрын
Many thanks Thomas!! I would have thought 3 years as well. LOL! You have a new sub!! Email me your mailing info and I'll shoot you a Shop Card. hobbydude007@gmail.com Have an awesome week!!
@michaelcooke2559
2 жыл бұрын
Very nice idea for a NASCAR build, and you have already tracked down lots of stuff needed for the build. This is going to be an awesome build when it is completed. Thanks for sharing.
@MarkBatsonHobbydude007
2 жыл бұрын
Thank you Mike!! I hope so!
@davidchin350
2 жыл бұрын
Nice plans for your Lumina Mark, those oil filter decals are awesome looking.
@MarkBatsonHobbydude007
2 жыл бұрын
Thanks David!! Just hope it turns out well! Yes sir the decals are great!!
@geraldsmith3633
2 жыл бұрын
You have quite a challenge ahead of you. But I'm sure when it's finished it will look phenomenal.
@MarkBatsonHobbydude007
2 жыл бұрын
Thank you buddy!! I sure hope so! lol
@scottbatson8721
2 жыл бұрын
Have fun, looking forward to seeing this one! Love ya! ✝️😁
@MarkBatsonHobbydude007
2 жыл бұрын
Thank you buddy!!! Hope it looks close to how I see it in my head! Love ya my awesome brother!!
@deenjoan9938
2 жыл бұрын
The shrubs always win Mark , when you said 1/32 I said well I wont say what I said ,I know if anyone can you can looking forward to seeing this build for sure what a challenge you put on yourself there Mark can't wait to see this all come together yea I got confused too lol enjoyed but I am sure you wont.👍👍👍👍
@MarkBatsonHobbydude007
2 жыл бұрын
LOL! True my friend! (you'd think I'd know that at my age) I just hope it turns out like what I see in my mind. Thanks for watching Deen!!
@juliusyoung9439
2 жыл бұрын
Wow Mark that is a lot of work but I know you are up for it can't wait to see it.build on
@MarkBatsonHobbydude007
2 жыл бұрын
Many thanks Julius!!
@ricks69z28
2 жыл бұрын
Awesome Mark,can’t wait till the next video buddy. Rick 😎✌️
@MarkBatsonHobbydude007
2 жыл бұрын
Many thanks Rick!! Me either! LOL
@marcosfernandeznanita7150
2 жыл бұрын
Awesome idea man, looking forward to see this two bad boys together
@MarkBatsonHobbydude007
2 жыл бұрын
Thanks brother!! Having fun! .....I think? LOL
@MetalMania3DTV-TAS-AUS
2 жыл бұрын
Wish I could Fined a kit for this, as I used to own a Chevy Lumina Nascar, in Australia, my answer 5 yrs seat belts, 4 yrs in Australia, Sweet shop Card from Ron @ Somo Diecast, cool show enjoyed 👊🍻🍺🍻🍺🇦🇺🤝😎👍
@MarkBatsonHobbydude007
2 жыл бұрын
Thanks brother!! So cool you had a stock car Lumina! You have some great first hand knowledge of the cars for sure! Ron @ SoMo Diecast is indeed a great guy and is awesome with 1/64 hot rods! He and I went to high school together many years ago. Cheers!!
@richardhardy870
2 жыл бұрын
Awesome stuff Mark , the makers are truely talented !
@MarkBatsonHobbydude007
2 жыл бұрын
Thanks Richard!!
@timkustom
2 жыл бұрын
Cool project! I started something very similar almost 30 yrs ago (gasp!). It was to be a Mello Yellow Pontiac.
@MarkBatsonHobbydude007
2 жыл бұрын
Thanks brother!! Jump in! Lets finish it up!!
@blastarrow5938
2 жыл бұрын
You wouldn't be willing to sell me a couple of those oil filter decals, would you? 😊 I loved those Monogram snap kits, I built quite a few of them back in the day. My all-time favorite NASCAR kit was the 1/24 Lumina and those were like a perfect little scale down of that. The newer Aoshima snap kits have fold-up interiors like that too.
@MarkBatsonHobbydude007
2 жыл бұрын
Thanks my friend!! Shoot me your address to the email in the video description area. As you saw, I have a ton of those little things! LOL I agree! The Lumina is an awesome kit!
@blueoxmodelshop3405
2 жыл бұрын
Holy moly thats gonna be crazy!! I cant wait to see how it comes out!
@MarkBatsonHobbydude007
2 жыл бұрын
Many thanks my friend!! I hope it turns out like I see it in my head.
@udomartens9733
2 жыл бұрын
Cooles Video 👍👍👏👏
@MarkBatsonHobbydude007
2 жыл бұрын
Thanks Udo!!
@GeorgesMiniatureCars
2 жыл бұрын
Really cool 1/32 scale NASCAR kits. Have the Petty, Earnhardt and Allison kit I built box stock. Dale and Davey's 1/32 race car haulers too, built them a looong time ago. They need to be cleaned up yet they're great to have! Love what you've done so far, going to be awesome when done!!👍👍
@MarkBatsonHobbydude007
2 жыл бұрын
Thank you brother!! Always wanted to build one of the haulers too! We will see! LOL!
@brucechapman5553
2 жыл бұрын
Looking forward to seeing you get into these kits. I think I might have a few in my stash. Gonna have to check and see what I have. Lol. Love those cup series decals. Might have to pick up some of those. Keep up the great work!!!
@MarkBatsonHobbydude007
2 жыл бұрын
Many thanks Bruce!!
@amandabatson3609
2 жыл бұрын
I have your Opti-visor! LOL
@MarkBatsonHobbydude007
2 жыл бұрын
I'm gonna need those back my dear! LOL
@SmallADVentures1973
2 жыл бұрын
Wow that's going to be an awesome project, brother, I'm really looking forward to watching! 😁 I did one of the AMT 1:32 92 Petty Pontiac for my Small Scale Group Build entry this year and have a few others 😊✌️
@MarkBatsonHobbydude007
2 жыл бұрын
Thanks brother! I'd love to see it!!
@goforitpainting
2 жыл бұрын
I have seen too many nascar models in the last few weeks and I can feel the consequences. :) That's how I bought my first model car too...
@MarkBatsonHobbydude007
2 жыл бұрын
I hear ya brother. I've seen kits outside of my usual wheelhouse and HAD to have them. more times than I care to admit. lol
@TheLukaCeeChannel
2 жыл бұрын
This is a test. Mark.
@MarkBatsonHobbydude007
2 жыл бұрын
Got it! I "think". LOL Thanks buddy!
@PatRedmond
2 жыл бұрын
Are you INSANE ?! Wait ........🙃
@MarkBatsonHobbydude007
2 жыл бұрын
LOL! Well....... ok a little!
@kgcustomscalemodles4762
2 жыл бұрын
Ill send you a set of decals for that 1/32 car
@MarkBatsonHobbydude007
2 жыл бұрын
Thank you my friend!! If you find those JAX 1/32, I'd be happy to buy them!
@charlescampbellii8193
2 жыл бұрын
Mark. How do you know what wire to use for the scale size you are building? Thanks Love watching your videos
@MarkBatsonHobbydude007
2 жыл бұрын
Thanks Charles!! Real plug wire is between 8mm to 11mm, (standard to performance) I use 0.018-0.020 in 1/24-1/25 "plug wire" from Pro-Tech, Detail Master, Gofer, etc. For 1/32 scale I'm going to use 0.012 and 0.0075 fine detail wire from Detail Master and from my local electronics store.
@sodakmodelcars
2 жыл бұрын
I would contact whoever you found the 3D printed wheel set at. From what I know of 3D printing, in most cases they can be scaled up or down rather easily. Kind of like paper printing you can print at 125% or 75% etc.
@MarkBatsonHobbydude007
2 жыл бұрын
Many thanks brother!! I found two companies that make some really nice ones in 1/24 scale. I contacted both of them about making 1/32. One said no. The other has never responded.
@jeffyoung8726
2 жыл бұрын
Hey Mark, you never did tell me where you got that driver figure in your last video?
@MarkBatsonHobbydude007
2 жыл бұрын
Hey Jeff!! Sorry about that buddy. You can get that figure from Jim at Salvinos JR Models. Jeff, just email Jim at: jim@salvino.us for a list of parts and prices.
@jeffyoung8726
2 жыл бұрын
@@MarkBatsonHobbydude007, Thank you Sir!
@Miguel-HobbiWerks
2 жыл бұрын
I can help with the 1/32 Wheels Mark. Let me know.
@MarkBatsonHobbydude007
2 жыл бұрын
Awesome brother!! I'll be in touch!
@charlescampbellii8193
2 жыл бұрын
5 years
@MarkBatsonHobbydude007
2 жыл бұрын
You got it!! Thanks for watching!!
@rickdee67
2 жыл бұрын
I really enjoy your work and your videos are great but luca cee is a clown .
@MarkBatsonHobbydude007
2 жыл бұрын
Thanks brother!!
@jamiegsscalemodelgarage3823
2 жыл бұрын
Hey Mark check with Miguel Devil Dog Dot Games maybe he could make the wheels for you in 1/32 scale I could message him
Пікірлер: 92