Thanks for sharing, Just bought a Multi Kruzer and can't wait to get out at the weekend. A bit daunting as a newbie but wanted a machine that would last and give me lots to experiment with, very helpful 👍
@faz752
5 жыл бұрын
It's a great machine brother good luck HH my friend 👍👍
@226093
6 жыл бұрын
Thank you very much it looks very complicating machine but I suppose most of them are till you get to know them anyway thanks for answering my question about the depth great video keep on swinging
@faz752
6 жыл бұрын
Pete Mitch its a great machine when you get used to it thank you for watching 🖒🖒🖒
@faz752
6 жыл бұрын
Pete Mitch if u get one and u need a bit of help just give me a shelt
@226093
6 жыл бұрын
Ok thank you
@MrPanastation
5 жыл бұрын
thanks for the detailed review of settings. Just getting used to mine
@faz752
5 жыл бұрын
Lol yer dos take a bit of getting used to I have changed the settings since this video I will give you the settings below that I use now which are Puker bro Gain 95 Disc 10 Notch 11 and notch out from 0 to 11 and 96 to 99 Fe VOL 0 T.BREAK 15 Tones 15 50 70 Isat 00 Frequency 19 kilohertz then frequency shift two F1 These in my settings now and I pull things out of ground Like There's No Tomorrow HH my friend &GL 🤜🤛
@jacobmcdevitt5056
4 жыл бұрын
@@faz752 which mode do you use these settings all of them?
@faz752
4 жыл бұрын
@@jacobmcdevitt5056 yes all 👍
@jacobmcdevitt5056
4 жыл бұрын
@@faz752 ahhh ok. I just got my multi kruzer yesterday so I'll be giving these settings a shot, thanks for the info 👌
@faz752
4 жыл бұрын
Yeah I found loads of hammereds and coins with these settings it will take some time to get used to the kruzer but once you do is a great machine
@thedeanisin256
2 жыл бұрын
TY thast was great Cheers
@komandante6942
6 жыл бұрын
Thank you for a good video. Likе of course. 👍👍👍👌👌
@chrismoenmagnetfishing4404
6 жыл бұрын
thanks for information bout the settings
@faz752
6 жыл бұрын
Chris Moen thats ok 🖒🖒
@jeremydeforest809
5 жыл бұрын
Thanks I thought the threshold was not working on mine because I was in the wrong mode.I wish you had a aka Signum mft like my other machine so you could make a video of how to better program and use that complicated machine for me.
@faz752
5 жыл бұрын
kzitem.info/news/bejne/mHyhlmmJnYtnZaA
@MrZizilis
3 жыл бұрын
Hey mate, great explanation on the Multi kruzer, thanks. I know you no longer use the Multi Kruzer but, since I'm gonna buy one soon, maybe you could answer about something that confuses me in the settings: Does Fe-Volume setting (eg 1, 2, n2, n3 etc) affects the Disc's range volume, or only the volume of the region from Disc up to the first Tone Break? For example...if I set a low Disc at 3 (a little Disc to help with chatter and stability, but not higher which affects depth), and then put my first "Fe" Tone Break at 10 in order to have a low iron tone up to 10... where the "Fe-Vol" setting applies? To the Volume of the Disc VDIs 0-3, or to the volume of VDIs 4-10? I guess that in my example, 0-3 (Disc range) will be completely silent no matter what and Fe-Vol will do nothing at it, and will only be able to adjust the 4-10 range's volume...am I right? Hope my question makes sense...
@faz752
3 жыл бұрын
No mate fe volume is only for iron the higher u go the less u will hear iron it does not effect any offer settings
@MrZizilis
3 жыл бұрын
@@faz752 Thanks man!
@faz752
3 жыл бұрын
3 tone mode khz 19 gain 89 disc 00 notch 01 fe vol n2 t break 05 tone, fe 15 gold/non fe 50 isat 00 vibrate 00
@faz752
3 жыл бұрын
U can change the disc say u don't want to here from 0 to say 15 put disc at 15 so u won't here anying from 0 to 15 and notch is the some u can notch out 0 to 15 and u won't here the numbers from 0 to 15 or u can notch out a single number say just 15 so u will here 0 to 14 miss out 15 then here 16 onwards
@MrZizilis
3 жыл бұрын
@@faz752 Many thanks for helping me out mate, really appreciate it! I'm trying to understand some basics of the machine before buying it. So, if I set disc from 0 to 15 as you say in your example, it will be completely silent and I won't here anything at the 0-15 range...Fe-Volume will have NO effect in this 0-15 range, right? (this "Fe-Vol" setting is the one that confuses me..)
@norfolkbushmanandfriends7916
3 жыл бұрын
Just bought one of these & I was under the impression that Gen gave a good signal to everything including iron? Is that not the case? Which mode do you seem to use the most? Thanks
@faz752
3 жыл бұрын
I do not have the Makro multi kruzer anymore but the one I used most was 3 tone and 4 tone. 3 tone is the best
@norfolkbushmanandfriends7916
3 жыл бұрын
@@faz752 did you ever change any of your settings in this video or did you stick to these settings? Did you ever find any other little secrets with the multi Kruzer? What machine are you using now? Cheers
@faz752
3 жыл бұрын
@@norfolkbushmanandfriends7916 Yeah I found a hel of a lot of thing gold coins hammered coins on a 3 tone settings i never change them The makro multi kruzer Is a very hard machine To get used to That's why I got rid of it i use the nokter makro simplex and xp orx now and have found loads more with these 2 machines than I would of with the kruzer
@norfolkbushmanandfriends7916
3 жыл бұрын
@@faz752 I nearly went for the orx instead of the multi Kruzer, I've ben using the goldmaxx power for years & had it down to a fine art, maybe I should've stuck to something similar to what I know but nevermind I'll stick at it, I guess I needed a change anyway. I hear the orx is inbetween the goldmaxx power & Deus?
@faz752
3 жыл бұрын
@@norfolkbushmanandfriends7916 yeah I love the orx fantastic machine don't get me wrong the kruzer is a immersive machine to gos very deep the scratchy signals always iron the 3 tone is amazing on it good luck my friend H/H
@BUILDNIGHT
6 жыл бұрын
Have you submerged the Makro under water? I did mine and it only lasted 20 mins before taking on water and died. very disappointed, but Makro sent me a replacement. I need to test this one now.
@faz752
6 жыл бұрын
No bro to scared to lol I don't do that much underwater lol thanks for the information will try in as it still under warranty
@rickylee7478
6 жыл бұрын
All setup now bro. Cheers for that. Only thing. In Gen it won’t let me change the isat to “0”. Any ideas 💡?
@faz752
6 жыл бұрын
Rickylee I know in gen mode it will always be on one because it goes so deep so don't worry just leave it on one
@rickylee7478
6 жыл бұрын
DIGGER 1 cool. In your last video you said “50” for gold/non ferrous. Why now 70 bro?
@faz752
6 жыл бұрын
Rickylee yeah I know but I tested itout that day and I found that if you stick it in 70 it's a louder of a beep because in deep mode you can only change the ferrous and the gold non-ferrous you can't change the non-ferrous because it don't give you the option to in deep mode but keep the other modes the same gain 88 disc 15 ferrous 15 gold non-ferrous 50 non-ferrous 70 I sat 00 keep these settings for two tone 3 tonne beach mode will be the same settings as deep mode
@rickylee7478
6 жыл бұрын
DIGGER 1 nice one. Sorted. Makes sense now. Where did you get the screen cover from bro?
@faz752
6 жыл бұрын
Rickylee got it from leisure promotions it was £13 bro cheapest one I could find just to protect the screen a little bit
@LUCYY001
3 жыл бұрын
Hello digeer1. Thanks for settings beach mode. But my question why in the GB 00.the Makro weak and can not find necklace but in GB 90 its very good.? Can you help me
@faz752
3 жыл бұрын
Ground balancing is a process of canceling out the effects of ground mineralization and letting the detector only read the new targets and not the ground and the target. In a way it is a form of discrimination but in a good way. When you ground balance a detector what you are hoping to do is find the proper balance between the effects of the ground and not be positive or negative of a ground balance. So in GB 00 The detector is fully open Seeing all kinds of stuff in the ground but in 90 It's a lot Cleaner
@LUCYY001
3 жыл бұрын
Thanks man
@PioneerDigger
6 жыл бұрын
Like 👍👍👍
@faz752
6 жыл бұрын
Pioneer Digger thank you brother
@RobRandom
6 жыл бұрын
I tried these setting but they don't seem to work on my garrett? I think you missed a step goddamit
@DetectoristTom
6 жыл бұрын
Rob Random Garretts are for randoms, oops 😬 lol 😝
@faz752
6 жыл бұрын
You div pmsl Rob 🤣😂🖕🖕
@LUCYY001
3 жыл бұрын
Hello digeer1. I Have a multi kruzer. And battery life its 8 horas its normal?
@faz752
3 жыл бұрын
Battery life is approximately 14-19 hours for the Kruzer and 9-19 hours for the multi Kruzer. U can get a external battery pack for it about £15 from regtons
@LUCYY001
3 жыл бұрын
Thanks digger1
@faz752
3 жыл бұрын
@@LUCYY001 watch one of my latest videos for the 10% discount code for regtons
@philfish6619
5 жыл бұрын
is it possible to set this to pick fine gold dust up on the streams
@faz752
5 жыл бұрын
No to shore may be mate
@wishfix
2 жыл бұрын
File a bit of gold off a ring or chain and test it.
Пікірлер: 66