I've had an original X-Arcade Tankstick for 16+ years, and it still works great today. I pre-ordered the Tankstick MAX when I learned about it. (It arrives tomorrow!!!) I'm really looking forward to the potential your spinners and trackball will add to an already great setup.
@ThomasGrillo
24 күн бұрын
Very glad to see they finally released an all-in-one controller like this one! Thanks for showing it. :)
@MeSiah1S
4 ай бұрын
Damn… that’s big. 🎉 Congrats on the collaboration.
@GlensRetroShow
4 ай бұрын
Thank you man 😊
@RetroFett
4 ай бұрын
I’ve got their older model, and it truly is a tank. Congrats Glenn on supplying the trackball and spinners for this excellent stick! If you’re building a home arcade, I highly recommend the X-arcade
@GlensRetroShow
4 ай бұрын
Thank you for the watch and they are a great partner 💞
@TheRealJPhillips
4 ай бұрын
Had my dual stick from XArcade for over 10 years now. Got 2 solo sticks too. I skipped the tank stick and got the Atari dual stick with the track ball. Added my own encoder boards and 6 extra buttons. 👍🏾 Nice video
@GlensRetroShow
4 ай бұрын
That Atari one was nice too I remember the close out at Microcenter
@l0rd0ct0d0rk
Ай бұрын
I've owned two xarcade duals since around 2011 or 2012. Loved using them for 4 player games. Seeing this is pretty tempting to try and save for.
@afterglow-podcast
3 ай бұрын
I plan on ordering one of these in August along with a pair of Sinden light guns for what could be my final arcade build. Got a Ryzen 5700 system with 48 gigs of RAM and a 3060 and 2.5 TBs of NVME storage and 8 TB external drives as the heart of the system, and gifted my son my original X-Arcade Tankstick from 2001 as a graduation gift. My last machine I built was a cabinet but this time I am going with just a stand that encloses the Tankstick Max with mounts for the Sindens and inside the PC and a projector that will shoot the image on the wall.
@dhultgren1
4 ай бұрын
I have the last model before this one. I added a GRS Spinner and wheel to mine, as well as put Ultimarc 4/8 way joysticks. Love the build quality.
@quantumfx2677
4 ай бұрын
Yes, those 4 to 8 way are a must!
@GlensRetroShow
4 ай бұрын
Nice Mods 😊
@williammccarthy5248
Ай бұрын
@@quantumfx2677how do you switch from 4 to 8 way? I have an older XArcade Tankstick and you have to physically change the plastic joystick ring inside the Tankstick between 4 & 8 way games. Thanks
@triple_lei
20 күн бұрын
Decided to splurge on this today. Got an email for a 20% off code on top of a sale. If they really were $250 before, they're not anymore... but with the code I basically did get it for $250 shipped. Curious to see how Breakout feels using spinners without a hard stop. Not to toot my own horn but I _am_ the only guy on KZitem with a "no miss" video on the 2600 version! I am also excited to try out Atari 50th on Steam again, with a single controller this time. There is a workaround to use the actual Atari 2600 paddles with USB but it isn't perfect... EDIT: Also have to say, showing those side buttons really sold me! I have a Solo from way, way back with the joystick mounted too high (I think I'll dig it out of the garage and make _that_ my Ikari stick)... and those only had the one button for the flippers. Meaning nudge was somewhere else. The best option there was the joystick for nudge, but that's still lame, and risks tilt way too easily. With a second button, I'll now be able to nudge with elegance and sophistication.
@mattthearcadeguy
4 ай бұрын
I had the old arcade cab that fit the OG tank stick around 2012. It was a good solid unit.. Congrats on supplying great hardware to these units!
@GlensRetroShow
4 ай бұрын
Thank you 😊
@chillyd1972
24 күн бұрын
Is there a cab they make that this will fit on
@therexershow
4 ай бұрын
Nice work Glen. That’s always been a high quality product and company , so they keep that going with your product. !!
@GlensRetroShow
4 ай бұрын
Thank you Rexer :)
@ToxcynTV
4 ай бұрын
Tank-Stick was my first stick. Got it for Christmas 2008 lol Its built very solid.
@GlensRetroShow
4 ай бұрын
Absolutely is. It's built to be used and last 😊
@chadtufts6320
4 ай бұрын
I built my arcade around the Tankstick and its still like new, the setting on the back set to keyboard/mouse is the best with Mameforall.
@GlenBaisley
4 ай бұрын
Crazy that they never offered spinners up until now. That was always my hesitation in purchasing it but now it's a no-brainer, especially with GRS products installed.
@GlensRetroShow
4 ай бұрын
😊
@jayhays8267
4 ай бұрын
One thing I would have liked to have seen is the ability to easily swap out the joystick to trigger style for games like Tron, Mad Planets and Gorf
@Riiiiiiiiiiiiiip
4 ай бұрын
Great honest review Glen as always!! Hopefully soon they'll be a coupon to to with it. Id like to upgrade to this Max because of your trackball and spinners. I still have my og Xtension Arcade with the original Tankstick. Had to clean the trackball a few times over the years to get that original spin back for Golden Tee.
@user-tj9cl2wb5f
3 ай бұрын
Love the durability of the Tankstick, I did change out the joysticks and buttons with the IL euro joysticks and buttons with Cherry switches and it’s perfect now. The stock ones don’t respond very well compared to the IL ones.
@jayhays8267
4 ай бұрын
I have the tank stick for my arcade cabinet and installed my own spinner. I placed my spinner under the trackball and it works great! Having the spinner placed under the trackball it does get in the way if playing "Golden Tee" but not too much playing other games. If this "max" version came out two years ago, I definitely would have got this!
@user-tj9cl2wb5f
3 ай бұрын
I placed mine under the trackball as well, and it works great, doesn’t bother me at all.
@jayhays8267
3 ай бұрын
@@user-tj9cl2wb5f I did think about placing the spinner between the "player 1" select button and the top right button (on the left side), but there were a lot of wires going around in that area.
@user-tj9cl2wb5f
3 ай бұрын
Yep there is not much room, but I think placing it under the trackball is the perfect place, using the buttons is easier. Placing it too high near the start buttons would bother me a lot, the new x-Arcade placement would put me over the edge 👍🏼
@vadergamer7722
4 ай бұрын
Well it's time to up grade... Thanks for the video
@GlensRetroShow
4 ай бұрын
Thank you for watching 🙂
@nrnoble
4 ай бұрын
What bothers me about this controller, and nearly all other controllers with spinners, is the placement of the spinner. If you look at arcade spinner games such as Tempest, the spinner is placed somewhere where it can be used by the right hand. In this video you see Glen is forced to play Tempest with this left hand and his gameplay looks awkward. It is not possible remap Player 2 's spinner to be used with Player 1. Also notice the spinner is placed directly above other buttons, forcing the spinner hand to rest, or hover, on those buttons. Not a good design for spinner games.
@GlensRetroShow
4 ай бұрын
Yes, you could definitely map the spinner to the opposite spinner. That is why on my iiRcade Ultimate Control Panel I made the joysticks removable so they won't interfere with the spinners.
@mwelle1
4 ай бұрын
I remove the upper right most button on the tankstick player 1 side and put Glen's Disc of Tron spinner there. Then I drill a hole with a 1-1/8" drill bit to the right of the two buttons on the bottom and restore the 6 player ("Street Fighter" layout). I do the same thing on the player 2 side, but put the plain vanilla GRS button hole spinner in the upper right, drill the hole in the lower right, put the button in and rewire.
@StitchJones
43 минут бұрын
Which MAME did you use to map the buttons. I spent almost an hour working on trying to figure out what to do, no matter what button I tried to map, it would select any. I did get the up and down to work and the player 1 button for quarters. I am really frustred right now because I waited almost 3 weeks for this and want to use it this coming weekend at a party.
@ragingtyga
4 ай бұрын
if only they made this in a single player with trackball and spinner config. It would make a great multipurpose Accessibility controller
@markbridgeman7678
4 ай бұрын
The shipping cost to the UK is so expensive. They need an EU distribution hub.
@reddog0069
3 ай бұрын
HOW DO I MAP THE SPINNERS ? I’m trying to play Arkanoid and can’t get it to work. 😢😢😢 What front end are you using ?
@GlensRetroShow
3 ай бұрын
You have to make sure the emulator you're using actually supports mouse. Even though it may be mame. It may be a version of meme that does not have the spinners or trackballs turned on A lot of times you can go in the menu and go under advanced configuration and make sure mouse and multi-mouse are turned on
@principalcarranza
Ай бұрын
Glenn, I just got the tankstick and would like to upgrade the buttons and trackball to rgb. Can I swap the trackball to your rgb one?
@Loffer-v7k
Ай бұрын
Can you use your wheel if you remove the spinners? Or is the Joystick in the way?
@djbneozen
Ай бұрын
Is this the exact same size as the original tankstick? I have an arcade cabinet for the first tank stick and I would like to buy this but only if it's the exact same dimensions.
@trer24
19 күн бұрын
Can you attach a GRS Arcade Spinner Steering Wheel to the spinner?
@HeavyInstinct
2 ай бұрын
I don't get it... How is this a GRS trackball? Looks like the exact same trackball they've always had right down to the connectors. They already had an extremely high quality product of their own that is still available for a great price. Doesn't even make sense that they would want to change it, unless they wanted an LED backlit model which this obviously isn't. Plus when I go to the thunderstick studios website, I don't see any 3" trackballs available. Only two different 2" LED backlit models.
@brianph9656
4 ай бұрын
Awesome video. 👍Definitely interested with connecting to a Mister. Would a GRS switcher be possible or needed if wanted to switch between 4 and 8 way for joystick games?
@GlensRetroShow
4 ай бұрын
Yes.. you would need to change the joysticks but yes you could Here is an example kzitem.info/news/bejne/xYWJq4CKfGlknpgsi=jSsVrbHj8ean7k-m
@brianph9656
4 ай бұрын
@@GlensRetroShow Thank you Glen 👍
@brianph9656
4 ай бұрын
@@GlensRetroShowjust preordered one of these Tank Max devices. Looks awesome. I did buy a set of the ikari warriors sticks a few months ago so if those can auto change 4 to 8 and back, I def will install them.
@brianph9656
4 ай бұрын
@@GlensRetroShow❤
@FhargaZ
Ай бұрын
Mine has taken so muchn abuse from the children and adults that the name fits 😂 I changed the logic board to the Zerolag and the joystick to 2 Industrias Lorenzo EUrostick ones for the fighting games and has been running perfectly from Rpi 1, to 3 to 4. The only regret was not getting the one with the trackball for some games and that for adults you will have more space. Thinking about buying that one or getting a spinner.
@GlensRetroShow
Ай бұрын
@@FhargaZ well it seems like it's had a good life there. You know the old saying a tortoise not played is not loved
@user-jk6sm4qi6v
4 ай бұрын
Do I need to change the spinner to play Tron? That part wasn’t clear.
@GlensRetroShow
4 ай бұрын
For the original Tron game You can use the joystick to move your character, the spinner to rotate your arm or turret and then one of the buttons. It's not the most convenient way to play Tron, but you can't play it. The fact that it does use my spinners you could always pull out the optical spinner and replace it with a GRS disc of Tron push pull spinner in which case then you can press down or pull up on the spinner
@juanelpito
2 ай бұрын
La salida es xinput?
@apuks
4 ай бұрын
Tsticks makes 3" trackballs?
@GlensRetroShow
4 ай бұрын
Yep 😊
@Eddylive
3 ай бұрын
Possible to use for Golden Tee?
@andy6576
3 ай бұрын
Definitely! And it plays great.
@EightPieceBox
4 ай бұрын
It only took them 20 years to add spinners, but they can''t get rid of their ugly logo. They make good stuff though. Is your mic inside the box? *thud*
@GlensRetroShow
4 ай бұрын
Lol 😊
@mwelle1
4 ай бұрын
How hard is it for them to add a 4-8 way restrictor that can be changed from the top like Northcoast custom used to sell or this guy makes?: www.printables.com/model/490135-happ-joystick-restrictor-plate-and-inserts/related
@user-jk6sm4qi6v
4 ай бұрын
Can this be used wirelessly?
@GlensRetroShow
4 ай бұрын
No. This is USB connected
@etharp1980
4 ай бұрын
Can anyone confirm if this will work with Nintendo Switch?
@xcom6466
4 ай бұрын
The artwork on this CP is horrible imo. It would have been better in plain black. Hopefully, there are options when purchasing it to change it.
@HeavyInstinct
2 ай бұрын
There aren't. But there are third parties that will print custom overlays that are meant to fit on the tank stick.
Пікірлер: 69