I'm watching four year old content to learn as much as I can in prep of my first foray into water cooling. Thanks!
@rustyneedle_uk2179
4 жыл бұрын
How'd it go ?
@gp381
4 жыл бұрын
Same here bro. I'm learning all about the parts and compatibility and best for the price. Slowly buying parts as I'm learning. Almost done, just need tubes, fittings and fans. I want this to be near perfect
@zackkirako8574
4 жыл бұрын
Same
@AlfredoWasTaken
3 жыл бұрын
Lol same boat, don't need it but I want it. What an expensive hobby.
@XxSANTOSAPxX
3 жыл бұрын
I'm about a month or so before I buy all the parts to watercool and boy am I nervous lol
@akistee
7 жыл бұрын
By simply building a pc, I became an electrician, and a plumber at the same time
@keeganholthaus7143
7 жыл бұрын
Nathaniel James Aguilar Im actually a plumber and am total stoked to do my first custom loop
@epicdestroyer6676
6 жыл бұрын
lmao
@minimaniac50
5 жыл бұрын
I'm actually an electrician and I'm totally stoked to sleeve my own cables and make it look flawless.
@codyterrill5947
4 жыл бұрын
I used to work on and install resturaunt fire suppression systems, which are very similar to this. A lot of the things I've learned do apply to PCs. It's funny how you learn the basics of one thing and find out how connected it is to a bunch of other things.
@ezioauditore9364
4 жыл бұрын
I feel that. 300th like BTW
@zack150
8 жыл бұрын
That slowly spinning fan was killing me
@FroxorF
3 жыл бұрын
2021, and this is the best video I've seen about how to freaking watercool a pc.
@IAmNumber4000
4 жыл бұрын
_2,900 emails_ “Very, very cluttered.” _glances at my 39,900 unread emails_
@ajaysingh-li6bq
4 жыл бұрын
Mine only Show 99.999+ so Ivana Even Tell Hop many
@zboy365
2 күн бұрын
Kinda fun coming back to a 9 year old video all because I've finally decided to try water-cooling. If Jay, Phil, or Nick see this... You guys rock and thanks for the repository of info!
@aspade01
9 жыл бұрын
You should host a class on custom loop liquid cooling. I'm sure plenty of people would pay money and travel to have you teach them and get hands on experience.
@gavin528
9 жыл бұрын
EnlightenedAce lmao
@casperclaudi1249
9 жыл бұрын
EnlightenedAce i would travel from denmark
@SwissGlitcher
9 жыл бұрын
EnlightenedAce I've never done a custom loop before, watched some videos, read some articles and now I already made two full functioning custom liquid cooled pc's. You dont need private lessons to do this, well unless you have two left hands..
@Barbaratio
9 жыл бұрын
EnlightenedAce The internet already teaches pretty well and it is hands on when you are watching then doing.
@aspade01
9 жыл бұрын
YoFavRussian "watching" is not hands on.
@jacksonsmith4648
9 жыл бұрын
Do you think you could do one on pumps? Maybe one that explains the different pump specs and how much pump the average user really needs? I'm having trouble finding a good guide.
@Yeaterramon
9 жыл бұрын
just buy a d5 or ddc
@ishansethi9202
9 жыл бұрын
Jackson Smith D5 go with D5 if you are cooling the cpu and gpu
@ishansethi9202
9 жыл бұрын
Chris Cleveland You are right, but a d5 can handle 1-2 120mm radiators
@ishansethi9202
9 жыл бұрын
Chris Cleveland why not both, put a d5 and a ddc in series LOL
@ishansethi9202
9 жыл бұрын
Chris Cleveland you get the best of both worlds for the moolah
@garyc5245
Жыл бұрын
I know this is an old video, but that is no joke on the "order extra statement," shipping for most watching this is not an issue; but living in Alaska, if you forget or "cut it close and come up short" the additional shipping cost would have paid for 4-5 fittings or a couple sticks of hard tubing. I spent hours looking at the case and laying it out and now that everything has arrived it is time to begin. Thanks Jay...I've spent 3 weeks watching your videos and although I have built air-cooled up until this point, it's time for my hand at liquid.
@manny_7901
9 жыл бұрын
Never thought of water cooling till i started watching your channel 6 months ago. Ive learned a lot and have to give a big thanks for sharing.
@ColeMarkusen
9 жыл бұрын
Hard tubing PC fittings have certainly expanded quickly in the past year. Still using push lock fittings on my copper tubing from several years back. Glad to see more options out there.
@Fidelity5789
4 жыл бұрын
Even 5 years later, this video is really helpful! Thanks
@JanderVK
7 жыл бұрын
Man, you have come through almost every step of the way with every question I've had thus so far with building my first (modern/water cooled) PC! I kinda got the gist that the two main were the barbed and the compression, and that the compression was better designed to be used on its own, but had no clue what the hell the rest of the shapes and other random pieces were for until this video. THANK YOU!
@NoxmanGGLC
9 жыл бұрын
Yesteryear we had a need to keep our big boxes cool but today it seems like just a hobby because of how efficient hardware has become.
@selaphiel2854
7 жыл бұрын
im still learning how to do a water cooled pc and this helps me out a lot to understand what to do. thank you so much.
@EposVox
9 жыл бұрын
Thanks for the overview!
@EposVox
4 жыл бұрын
@HACKSON EMPIRE Oh noooo how dare I watch content! 4 years ago, even! OH NOOOOOOOOO I'M THE WORST
@EposVox
4 жыл бұрын
Not at all, I'm not the one saying "fuck u" on 4 year old comments.
@EposVox
4 жыл бұрын
@HACKSON EMPIRE Because I watch a lot of videos?
@EposVox
4 жыл бұрын
I'm primarily a KZitemr, but I stream too
@CheapBastard1988
3 жыл бұрын
All the comments you were reacting to have been removed. I guess it's for the best but it does make me curious😅.
@hphector6
9 жыл бұрын
That fitting joke actually made me smile, thanks!
@iamthejohn7064
9 жыл бұрын
I was going to complain about no tech talk again (ass that i am) but this video couldn't have been better timed and really helps me plan out the future. Thanks, Jay! - last time i watercooled it was all clearflex and barb fittings lol
@BradB111
9 жыл бұрын
This video couldn't have been timed any better! will be doing my first water cooling loops when 6700k is released. I need to know this.
@thermalnoise2976
7 жыл бұрын
Thanks for the info. Started my first DIY water cooled GPU/CPU system and its been feeling pretty overwhelming until i started watching your vids. Thanks!!!
@Kallnar
8 жыл бұрын
Whoa. Convergent Evolution. Just designed my first rigid build on my own and came to the same fittings and basic design on my own. Goodonya Jay.
@jackhoneycutt9589
9 жыл бұрын
Only jay could make a 16 minute video about fittings
@Papa_Biscuits
9 жыл бұрын
Thank you so much for going over all of this. I'm taking notes and building a log of all the things needed for my build. Please, could you go over the procedure and tools needed to do the bends for the rigid tubing?
@Whatastic
9 жыл бұрын
thanks jay for what you're doing for the water cooling community/WCC
@FoxHoundUnit89
3 жыл бұрын
Have you considered updating this guide? I think it'd be great to see if there's new products out there worth looking at.
@sasquatchcrew
9 жыл бұрын
Thanks for making this video Jay. I was thinking about how long it would take me to research fittings... This just saved me some time.
@trickzzxD
9 жыл бұрын
I really love all these Watercooling 101s. It's just so helpful for novice or amateurs. Because of you I am deciding to go with rigid tubing in my build, which I'm going to buy next week :D! I just hope you update the ones that do need updating in the future.
@TheSilentHearts
9 жыл бұрын
Thank you so much. I've been planning a custom loop build for a while now, but I've been too busy and lazy to do my research about fittings. This video couldn't have been more conveniently timed!
@hbhamilton3
9 жыл бұрын
Thanks for this video, Jay. I'm considering my first custom loop and this was helpful.
@jerededmons4313
3 жыл бұрын
You should do an updated 2021 fitting guide!! Including quick disconnects, distro plates, maybe how to dual pump?!
@TekOverclocked
9 жыл бұрын
This video for sure is going to help me with my first custom loop
@Cloud9er
2 жыл бұрын
Was a good video. Learned a lot as a beginner. More comfortable with it now.
@danielding377
9 жыл бұрын
I come to your channel everytime i need to know something about custom watercooling or simple case modding
@sergiomatalon
6 жыл бұрын
Good Afternoon, I can use liquid vaseline for the acrylic tube to enter the compression fitting, without damaging the orings.
@NotesofNosh
9 жыл бұрын
Jay, just stopping by to give you a huge thanks. Ive been watching your channel for quite a while and your videos have been helping out a lot.
@mrjockey87
9 жыл бұрын
This really helped my understanding in how fittings are used. Im kind of new to watercooling and this series are really easy and helpful. Thanks for your upload! Next i would like to see different ways to CPU cooling since you already covered the GPU part. What to think about when choosing coolingblocks and what to pick, copperplate or other? Go through what you think is important when liquidcooling your CPU. What temps to aim for and different attachments for the block. How to best avoid leaks and so on. Give us the Grand Tour. Regards Jonas Sweden
@ElNeroDiablo
9 жыл бұрын
At 5:25 the soft-tubing 1/2" ID x 3/4" OD can also be written as 13mm ID/19mm OD for those in Metric countries (realistically 1/2" is 12.7mm, hence why it's rounded UP to 13mm). In the same vein, the 3/8" x 5/8" soft tube/fittings will be 10mm/16mm (since 1/4" is rounded to about 6mm). And one thing I learnt from building my first watercooling system loop in Beast Rig - remember to add a way to drain the damn thing. As it is, if I want to add a draining method now, I'd have to clean out the floor of the case (mainly remove the PSU and cables), then open one of the fittings of the GPU block (which is the lowest point) to drain the loop before I can add a proper way to drain it. >.>
@davidvelez1988
7 жыл бұрын
jay your the best. always so helpful. Total noob to computer builts. going big soon and you are instrumental to getting it right in least amount of errors.
@ddrght12345
9 жыл бұрын
THANK YOU for these watercooling help videos. These will come in VERY useful soon. I currently only have a H100i, but come tax time, I plan on upgrading to a custom loop, including adding my two 970s. (with that being said... I would *LOVE* to see a vid specifically for water cooling graphics card and installing the water blocks.)
@uwishanator
9 жыл бұрын
He did a GPU water block install video like 4 days ago just go on his channel.
@ddrght12345
9 жыл бұрын
Well crap. I feel stupid now. Haha. Cant believe I missed that. Thanks
@uwishanator
9 жыл бұрын
No worries lol
@odaimohammad3687
9 жыл бұрын
love your channel, love your videos, could you do a hardline cooling guide?
@Mythicalgoon
7 жыл бұрын
i love that jay screws up on at least 1 word per video, i find it hilarious.
@acuralee
4 ай бұрын
Bitspower has always been my favorite. Although they seem to be harder to find. I've heard EK has leaking problems with their fittings so Corsair seems to be the goto unless you can find alpha cool in a color of your choice.
@angrygoldfish
9 жыл бұрын
Thanks a lot for the video. It cleared some questions up I had about right-angled fittings.
@showjaypee7317
3 жыл бұрын
Exactly what I needed thank you so much
@ericromig3138
5 жыл бұрын
Great Videos, Purchased most of my parts for my Thermaltake 900 build and these tutorials really help a lot. Kudos for explaining it in 5th grade terms.
@OldAsDirt2013
5 жыл бұрын
As a beginner owning a pc now after laptop crashed I would love to see a video from Jay on how to fit or size additional cooling options in the case to optimize cooling.
@IndustryOfMagic
6 жыл бұрын
I want to watercool my new PC build and after doing some research I heard that homebrew kits are far more superior than any market plug-n-play kits. Question 1: Can you confirm if homebrew watercool for CPU and GPU are indeed better? Maybe say your opinion on pros and cons Question 2: Can you make a step-by-step guide on setting up a homebrew kit that has glass tubes along with how you clean before installing, etc? Like, a guide to cover every step for a homebrew kit that cools both GPU and CPU. Many thanks! Keep it up!
@rBennich
3 жыл бұрын
10:50 "Because the fittings are already built into the fitting". Xzibit says hi!
@dusctilldawnrttc2308
5 жыл бұрын
Excellent video. Only thing I would add is to make 2 ball valve assembles one for your drain at the bottom as you suggest and one at the top of the case for filling and airflow during draining and maintenance. ( comment from a master plumber). Also air test before you fill system with liquid.
@terere2011
9 жыл бұрын
THANK YOU SIR! Been waiting for this video for quite a lot! Your Tutorials al really good! You should do more about more stuff! (bikes cars whatever you like)
@peshno13
6 жыл бұрын
Thank you for the fittings guide! It helped out a lot because I needed the pass through and didn’t know what or where to look. Thanks to you I have em. Thank you good sir. You have a new subscriber.
@blazerman123200
9 жыл бұрын
one of your best How 2 videos Jay
@technolucas3720
9 жыл бұрын
I like these videos before I even watch them.........because I know its gonna be great......keep up the great work Jason!
@ReeceConrad
9 жыл бұрын
Absolutely great video! Exactly what I wanted/needed to learn about to have the confidence in moving forward with my first water cooled build
@haurjie
5 жыл бұрын
Jay is there an updated version of this video? Any new changes or updates with the information presented here?
@HappyNewsMedia
9 жыл бұрын
Thanks for the guide man :)
@godsstepson1495
5 жыл бұрын
Ty, i didnt know what to order before watching this video, and helped me understand where to put my drain plug and how to use my pump efficiently to drain the system faster
@sayithowitis2865
2 жыл бұрын
love this guy always gives me exactly the information I need.
@lexzbuddy
Жыл бұрын
I would only ever use flexible tubing. When I first did water cooling, these fittings didn't exist. It was barbed fittings and swagelok/A-lok. It was expensive. Pumps didn't exist, everything was DIY. So much easier these days. Good video.
@kaceyhowell6570
9 жыл бұрын
Thanks for this, my first build is probably going to be water cooled and I never knew how to use the fittings
@pimvandervliet
9 жыл бұрын
Currently configuring my first watercooling loop, which also is a hardline loop. Probably not the best idea for a first one but oh well. Thanks for the guide. I ordered coolforce fittings by nanoxia, never heard of them but I found some good reviews.
@litesawse
7 жыл бұрын
I use tubing smaller than the barb by one size. I heat it up a little to get it over the barb. When it cools. it shrinks to the barb. I still use compression to be safe but its just a backup. Though I have not managed to get the tubing off the barb without slicing tube.
@garywilkey4776
4 жыл бұрын
Not gonna lie! I just want to say thank you jay! We have Linus tech tips for anything hardware software related, and we have you who we can always find the best custom water cooling guide and over locking guides! You sir are the man!
@websterri
3 жыл бұрын
Linus is a joke. You don't "have" him for anything.
@JasperSkallow
7 жыл бұрын
JayZTwoCents, the enthusiasts channel.
@MERCENARYTAO1
9 жыл бұрын
I haven't been able to watch as many of your videos as I used to and have been on about a month hiatus. But HOLY SHIT you lost weight! Keep it up Jay!
@TheMavJarro
6 жыл бұрын
I don't think you have ever asked for a like and subscribe bell icon click, so I've liked and subscribed and mashed that bell icon! i cant think of a better channel to show some love to from the knowledge i have gained.
@TechTiger1007
4 жыл бұрын
I have watched several of your water cooling videos. I find them really great. I am hopping to put up a video on my first custom loop. granted I am doing it to a I3 as an experiment. Thank you for all your info.
@ryanwilson6877
9 жыл бұрын
Can you do a video on what metals to have in a loop because there is quite a lot of them and thanks was a very awesome video.
@TheOldfozz
6 жыл бұрын
very fit video on fittings, gonna plan my system..let ya know if it fits
@nightmarecivic
7 жыл бұрын
Jay I hope you get to read this. Quick question that I don't think I've seen anyone touch on. I'm getting ready to do my first water cooling build/hard line. I'm using EKWB fittings and was curious if a tiny tiny touch of silicone grease on the O rings would be beneficial in both tightening down and help sealing? My trial fitment shows a lit of friction on the tightening down between the ) rings and the tubing. Thank you Jay. Love the channel
@ishaanbhardwaj8992
9 жыл бұрын
HardLine tubing guide!!!
@falictissueextractor1143
9 жыл бұрын
Ishaan Bhardwaj 'Hardline'
@ryanrussell4071
9 жыл бұрын
Ishaan Bhardwaj Agreed!
@VNOMxVIPRZZ
9 жыл бұрын
Nope, there would be WAY to many jokes about being "hard" 😂😂
@foxpot9411
6 жыл бұрын
agree
@user-di6tq3mn8t
5 жыл бұрын
He did one
@basssq3
9 жыл бұрын
Hopefully going to dive into this within the year, can't wait!
@motoxtim34
5 жыл бұрын
This is still one of my favorite jays videos
@00FuTBoL00
4 жыл бұрын
hey, love the video and have what is probably a stupid question. I understand how the fitting size relate to the tubing size but I am confused on how that ties to the water blocks for the hardware and rigs. Are those independent to the tubing size? Or do those also have sizes?
@DjManeyecool
8 жыл бұрын
I got a EK Kit ,and now i know what to work of from that as it uses what ever it uses and for me it's G(3/4)-10/13. that's it that's all i need to know. the kit was amazing to do use and i got a drain for it but need extra fittings that are easy to get. just make sure to tighten it down by hand (fingers) till you can't no more then you are golden ,never use a tool to tighten . Tho i can be wrong as im just starting out my self and for me FT job it worked out great time wise. just also with kits make sure not to get the 1 that is cheapest or most expensive as they may not fit this or that Rads are a thing to know as they can be very big to like not fit in you're case what so ever. CPU Blocks mine is universal make sure that fits you're socket type. make sure there is room for the pump also the res can fit in. My Pump is higher then the res i will change this but it is possible to do it that way as for me my rad is on Top of the case allowing me to Fill the loop from a available port on top of the Rad (it had 2) .Mehh my thoughts. im still learning it all my self but fittings was the easy part for me as i got the kit and did not have to worry about any thing as ,now all i have to do is mach up the fittings to what i have now easy done ,next part for me is get what ever more Fittings more more more lol.
@MaZEEZaM
6 жыл бұрын
When I was creating my seals I felt like GOD!! next time I really want to create penguins to go with the seals.....
@LexLutha
7 жыл бұрын
Jay, I just bought all EK water cooling supplies to do a full rigid loop. All I need now are fittings and coolant. Thank you for these kinds of videos. I feel very confident about doing this. Wish me luck :) ps: what size tubing is in skunkworks?
@CenoRoll
5 жыл бұрын
Just started planning for a new build and I'm all out, thanks Jay
@ckool77
9 жыл бұрын
yeh more of this guides please!!! would love it if you did one on how to do acrylic tubing JayzTwoCents
@smoothgrvs
9 жыл бұрын
This has been very helpful, too bad you didn't do a guide on fittings before. Thank you Jay!
@LS-jk3fk
4 жыл бұрын
what happens if a fitting is non-rotatable? Will i have to use adapters or clamps or something? I hope its just as the same as roitatable, just in some sort of different way, where it can still connect to the tubing (soft tubing here) without any extra stuff. 13/10 btw (3/8 ID, 1/2 OD)
@mull54
9 жыл бұрын
I must say your channel is one of the best, if not the best tech channel on KZitem. keep up the good work mate! Also will you get your hands on the Gtx 980 Ti HOF LN2?
@JonathanPeytonMUFC
6 жыл бұрын
Excellent and informative as always Jay ,thanks so much for all you do!
@ActualKaktus
3 жыл бұрын
Astoundingly useful. Thanks!
@chalkchalkson5639
9 жыл бұрын
would you recommend these strange quick plug and unplug fittings for draining/filling instead of a valve? I mean it is a little more convenient but I have no experience on how leak-resistant they are.
@AmishGuy222000
9 жыл бұрын
Thanks for another great video J. Im going to pick my fittings now with the help of this video. Already chose my rads with your Rad video. All that is left is pump + res, which I'm going to probably watch more videos of yours and i'll have an easy pick :)
@PatriotPaulUSA
7 жыл бұрын
Nice Video as always Jay. I wish he would do one on all the new pumps/res combos. I did some research for any interested. A Laing D-5 is anywhere from 350-1400 LPH- 4M head depending on brand 50,000MTBF and quiet. A DDC is 500LPH and 7 to 20FT head and a lil louder and runs a lil hot has a 50,000MTBF A new design XSPC -X4 Pump is 600LPH and 3M head and the cheapest, at 35.00 bare. No MTBF spec. The new Enermax pump is 900LPH and 5.2M head 100,000 MTBF and the 2nd least expensive. Guess what I bought?
@suddencomfort2870
9 жыл бұрын
Thx Jay, I have learnt a lots from your videos, and I am about to build my first hard line tubing for my PC, wish me luck
@KingAzaz
7 жыл бұрын
at 2:56 when he looks away, he looks just like Tom Hanks from the side
@Jerrybu57
9 жыл бұрын
Great video! Would love to see one on the options for connecting (water cooling) 2 video cards in SLI
@johnsonnpc
8 жыл бұрын
Absolutely awesome! I am getting the water cooling fever.
@JEBNetwork
7 жыл бұрын
Hey Mr. J. please be more specific about what each fitting is properly called... some fittings are so hard to find... THX
@TigerXGame
7 жыл бұрын
This answered a ton of questions I had. Thanks!
@DTA_Crypto
9 жыл бұрын
Great video Jay don't forget about 16mm ek and bitspower make fittings and tubes for that.
@surco76
9 жыл бұрын
Thanks Jayz i been waiting for this video. It helped out alot.
@ODIOPOWER
9 жыл бұрын
How to drain a custom loop build without the draining valve? Im in trouble here, any tips? *****
@ThePhantomNetwork
9 жыл бұрын
ODIO POWER lay your PC on it's side get a funnel clamp a soft tube to the bottom and a roll of paper towels crack your system at the lowest point, when it stops leaking in the bucket screw in a soft tubing setup like he showed you above, stand your rig back upright and unscrew a fitting at its highest point so the system can drain then you can put your valve in at the lowest point and proceed to flush your rig with a couple of gallons of distilled water, then you can refill with new coolant don't use the old it breaks down and can clog a system
@TheChurchofCacti
9 жыл бұрын
ODIO POWER Another trick if you have a EK waterblock on your GPU is to put a bucket underneath one of the plugged GPU ports, tilt your case, and unscrew the plug. This will allow you to at least get some of the water out and from there you should be able to remove a tube, drain, remove another tube, drain, and so on. Make sure to double check that there is no water left in the tubes your removing though and always think twice. Once you get it all drained install a drain port of some sort. I have a Alphacool 120mm rad on the bottom of my case that is a perfect drain port. It has two front facing plugs that I simply need to remove for easy draining. Plus it's another 120mm of cooling =)
@forza1sra
6 жыл бұрын
Drill a hole at the bottom of you reservoir and patch it later.
@brandishwar
9 жыл бұрын
There's also 16mm OD rigid tubing -- I think EK and Bitspower make fittings for it.
@cy2087
9 жыл бұрын
Thanks a lot Jay! This was really helpful.
@anomous2307
4 жыл бұрын
Thanks, I've been using home depot barbs without a o ring due to lack of knowledge with some s 2+ silicone sealant. d I corrected that mistake before watching this but I didn't really understand what compression fittings were. Google was probably spying on my search history and suggested this. craaaeeeepy
@Greggg57
2 жыл бұрын
So, how much torque is applied to the G1/4 fitting into the female receiver? Should I lubricate the G1/4 seat? How about teflon tape thread sealant?
Пікірлер: 638