I just purchased a Herschede Sheffield model 290 9 tube can’t wait for it to be delivered next weekend.
@DaltonClockRepair
3 ай бұрын
Nice, hope you enjoy it!
@aplacecalledfear
10 ай бұрын
I just inherited a Herschede 9 bell 3 train in a Queen Anne case. It was my grandfathers. He was a barber in the Wissonoming section of Philadelphia, but he also sold jewelry and repaired clocks and watches. The clock runs but the chimes are not working. Clock was built in '46.
@V.G.F.
8 ай бұрын
I have a Queen Anne too. Originaly 9 tube three train but now 5 tube three train.
@V.G.F.
2 жыл бұрын
Hello sir. I need help with a herschede grandfather clock… 1915 Panama International Exhibition grand prize it isn’t chiming, and the pendulum stops after like 6 3 9 or 10 hours. Maybe even 24..please reply,, it would help a ton if you would make us a video explaining if you still have this movement……
@pauldyck4596
2 жыл бұрын
Interesting video especially the stuff about Wanamakers and the Herschede part redesign. If you have time it would be nice to have a video of what the clock sounds like chiming and striking at the customer's house - probably pretty nice with those tubes. When you have to redo bushings that someone has previously done, can you just take a punch and pop out the existing bushing and then install a new bushing in the same hole without having to do any reaming of the plate since that was already done? I would think so but am curious as to what you think. I am working on an Ingraham 'Gila' kitchen clock which has a bunch of previously installed bushings that need to be redone.
@DaltonDroneZone
2 жыл бұрын
Thanks for the comment. As long as the bushings were installed using the same bushing tool that you use, you can pop them out and replace.
@clockdude1500
2 жыл бұрын
This looks like a 1920’s or early 30’s movement judging by the quick peek I got of the moon dial. In the 40’s, they replaced the larger, more pale moon faces with smaller more yellow ones that hid behind the hemispheres better when there was a new moon. I collect a lot of the early ones made before the company moved from Cincinnati to Starkville. I also have a 2 weight Herschede but it’s only a 5 tube. They are quite an ingenious design but can be quite temperamental and cantankerous at times. I was told Herschede designed this movement around the First World War to save on parts like brass since it was needed more for artillery shells and rifle casings. But due to the movement being troublesome, it was dropped from their line of movements after just a few years. Just out of curiosity, where do you obtain the leather for the hammers? I haven’t had any luck finding any that is the proper thickness, always too thin or too thick. Great video by the way, looking forward to the overhaul on the two weight.
@DaltonClockRepair
2 жыл бұрын
Many thanks for the insight my friend. That's very interesting info on why Herschede made the two weight movement. I've worked on a number of them and they are temperamental. I got the leather from a shoe repair shop years ago.
@DaltonClockRepair
2 жыл бұрын
You were spot on with the dates. I found newspaper sections from a Cincinnati newspaper inside the weights used to keep the inserts snug dated August 21 1927. 👍
@sopcopotoptop
Жыл бұрын
I have a Herschede tall case clock that was made in 1913. One of the very early Herschede made movements (I believe they started making their own movements in 1911?). Anyway, I usually turn off the chimes in the night but sometime I forget what quarter the minute hand is on when I turn it off and turn it back on in the morning in the wrong quarter and the chime sequence is off. I guess the early movements are not self-regulating??? I always have to fiddle with it until I get the timing right. Anything to know about these early movements? Love the clock and the movement is very robust. Thanks for the rebuild videos!
@gilroy7979
Жыл бұрын
Hello Mark; just happen to catch you today on KZitem I have a Herschede 9 tube chime clock. I’ve had serviced a good number of years ago but haven’t been lucky w/recent services in my area. Where are you located from? Presently hasn’t been working for a couple of years now. I’m located in Huntington Beach, CA. Any chance you could refer me someone local capable of servicing my Herschede?Thank you Tony S
@Benicio_Fols
Жыл бұрын
The weights on mine wires are all tangled off the arbor. How do I fix without taking the movement apart?
@adampoltorak1449
Жыл бұрын
I also have a herschede tubular grandfather clock. The movement is looks like the movement your working on in the video. My Herscede works well tells good time and chimes, but it doesn't chime at 12, 3, 6, or 9 but at 2, 5, 8, and 11. How can I fix this issue?
@notgiven4799
Жыл бұрын
Do you purchase or make your own leather hammer tips? Thanks.
@DaltonDroneZone
Жыл бұрын
I make my own.
@vipir06
Жыл бұрын
I would like to know what dremel tool you used for polishing and where I could purchase from? Thanks
@DaltonDroneZone
Жыл бұрын
I use a variable speed Black and Decker “Dremel style” tool. They can be bought at any hardware/home improvement store.
@vipir06
Жыл бұрын
@@DaltonDroneZone I would also like to know what type of buffing wheel, I only am familiar the felt wheels?
@DaltonDroneZone
Жыл бұрын
@@vipir06 rubber wheels impregnated with grit. Not sure where you can buy them. I get them from a supplier that does not sell to the public.
@ejduvail
2 жыл бұрын
Do you have a video of how set drum for the correct chime sequence.
@DaltonClockRepair
2 жыл бұрын
I do not. Set the hammers to descend down the scale at the quarter after for Westminster, Whittington and St Michael chime.
Пікірлер: 25