The transformation of this 4runner is fun to watch.
@Ratchetanium
3 жыл бұрын
Always enjoy watching the 4Runner getting worked on!
@stevevice9863
3 жыл бұрын
I was getting a vibration after I did a 2" lift on my 2000 4Runner, and adding the diff drop solved it. Nice Runner!
@nolimits4293
3 жыл бұрын
Love the 3rd gen content, my 01 is getting new LBJ’s this weekend, tundra brake upgrade, and oil change. Wanting to do a lift soon.
@druglord57
3 жыл бұрын
I wish I knew how to work on my 4Runner like you do man. Looks like fun and there’s got to be something satisfying about doing it yourself.
@alexandreemond7041
3 жыл бұрын
Great content as usual!! This 4Runner is one of the best looking off road build I've seen! Keep up the great work, it's awesome!!
@austinniemela
3 жыл бұрын
Thanks!
@arthurmiller9434
3 жыл бұрын
Greetings from Chiang Mai, Thailand. I recently discovered your channel. Love what you’re doing to the 4Runner and other Toyota products. Toyota is the leading automotive brand in Asia, but the 4 is not available in this market, so I drive a Fortuner. I’m upgrading the suspension and brakes now. keep up the good work!
@CB-hr6zs
3 жыл бұрын
Good video bro, will you be doing a exhaust system for the 4Runner or a new paint job next
@Ashoud_Anobetah
3 жыл бұрын
9:52.. when you install that adjuster rod, you can set the length with a small screw driver through a removeable rubber grommet thats in the rear plate. . i do this occasionally when inspecting the clearance between the shoes and the drum. the slight pull to one side you mentioned in the video during the test drive can be fixed with this adjuster... great video!
@diyjeff1838
3 жыл бұрын
Nice work. These trucks should last forever.
@dandorris8531
3 жыл бұрын
Nice work, if your ever at Home Depot buy the mortar mixing pans. They make two different sizes. I bought one of each but find myself using the smaller one most. They make great catch pans for any liquids that run underneath the vehicle especially when cleaning brakes or for general use. They are durable and cheap. You will like these.
@conservativeokie
3 жыл бұрын
Awesome as always Austin, however... We’re really going to need you to line-x that rear chrome bumper!!! 😁👍🏼
@austinniemela
3 жыл бұрын
Yes yes I need to
@TheXzorot
3 жыл бұрын
Damn, these updates are on the regular now 👍 Loving the commitment!
@austinniemela
3 жыл бұрын
Thanks man!
@bubbafringman1864
3 жыл бұрын
Third gen 4runner are the best. Amazing how much owners still want for them with 250k miles on them.
@cmart9240
2 жыл бұрын
Hey man, I'm a few months late BUT they make a "spill free kit" for brake reservoirs, similar to the kits they have for refilling radiators. You can buy them at harbor freight, amazon, local parts stores probably. Figured I'd fill you in on that info in case you didn't know about them. Saves you a few trips up front to check on the reservoir.
@gewglesux
3 жыл бұрын
This is my New GO TO channel for everything 4 Runner. I like the wheel/ tire combo... I might have to run the same thing if you don't mind.
@austinniemela
3 жыл бұрын
Absolutely!! Thank you!
@gewglesux
3 жыл бұрын
@@austinniemela I have a 3"toytec so hopefully i'll be able to run a similar setup. running Duratracs now.. need something less agressive.
@melidigitaki1475
3 жыл бұрын
The 4runner transformation is so so exciting, subscriber from the first truck. I just love love all of the trucks. Amazing craftsmanship bro!!!!! Always looking forward to all your updates. Love from the Fiji Islands in the south pacific 😍
@austinniemela
3 жыл бұрын
Awesome! Thank you!
@SangTran-zn7lq
3 жыл бұрын
Tundra Brake Upgrade. =D
@mikaele7290
3 жыл бұрын
More love please brotha!! Aloha 🤙🏼
@thomasbeltran5417
3 жыл бұрын
It has been fun to see all your vehicles the transformation has been fantastic. Very talented young man keep up the good work 👍🏾
@austinniemela
3 жыл бұрын
Thanks 👍
@idiotsdirtbikes3014
3 жыл бұрын
Loving the inspiration for my runner
@archidgo97
3 жыл бұрын
hello from Mexico! Love this serie!
@NextAdventureYoutube
3 жыл бұрын
Awesome stuff! Great video man!
@austinniemela
3 жыл бұрын
Thanks a ton!
@MussaKZN
3 жыл бұрын
The front bar you made for the 4R has to be the cleanest one I’ve seen on any Toyota, Nice work mate!! Rock Sliders next I would think!! PS I hate you I just downloaded Instagram So I could see photos!! I don’t like social media!!
@JoeMNPT
3 жыл бұрын
Those look like harbor freight Jack stands. I had the same ones. There’s a recall and they’re telling people not to use them. You might want to look into that. Mine were one of the ones that were recalled so I took them back
@MySunroofWorks
3 жыл бұрын
Tundra 13WL front brake upgrade next! Still digging the channel buddy!
@pennington5355
3 жыл бұрын
Low key the 4runner is my favorite vehicle.
@idiotsdirtbikes3014
3 жыл бұрын
you should do the tundra disk brake conversion
@oakleyjack7600
3 жыл бұрын
You continue to impress Austin ! You might want to tag in emergency brake repair in the title for people looking for help & info 👍
@austinniemela
3 жыл бұрын
Thank you!!
@luiscruz-no3ib
3 жыл бұрын
Apply more toe in on right front tire that will helps
@erikramosandmelody8774
3 жыл бұрын
You should bring your truck anyone of them to Cali and hit some rock trails with the 559 yota crew. Coming from oakhurst/ bass lake Cali. Love the channel.
@98ls10yfz
3 жыл бұрын
Keep up the quality videos bro! I actually picked up a 02 4runner not to long ago
@austinniemela
3 жыл бұрын
Thanks! Will do!
@packingbone1953
3 жыл бұрын
Damn man it seems like just the other day you were at like 12,000 subs. Congrats on the success and hard work.
@austinniemela
3 жыл бұрын
Thank you man!!!
@mrdark969
3 жыл бұрын
Hella nice man I'm planning on doing the same to my 02
@sethrussell5649
3 жыл бұрын
Get the dorman steering rack bushing instead of the energy suspension ones. The energy suspension ones are to soft and the steering rack still moves.
@omarcaceres4162
3 жыл бұрын
Nice truck dude 😁👍 I have a 98 4 runner limited already lifted 3” I want to get a from bumper like your Could you tell me where did you get it? Thank you so much 😊
@california199_7
3 жыл бұрын
I replace brand new front and rear brakes on my 2000 Tacoma steering wheel shakes when I brake. I checked all the front end components nothing loose. Wii it be that ebrake line you took it and clean?
@TheJcgaytan01
3 жыл бұрын
Hello, I would like your opinion about modifying a 2019 Escape, to do something off road, it has slope assistance, 6 speeds, 175 hp and 180 torque engine, lever speed control, automatic transmission, to make it higher with more tires aggressive and rool bar with winch, fog lights, I already have a basket upstairs, and a good trunk space, on the subject of suspension, what can I do ... I hope your opinion since I see on your channel that adaptations can be made, I hope your honest opinion, greetings from Cuernavaca, Morelos, Mexico.
@carni6319
3 жыл бұрын
Lovin the 4runner vids!
@charlyvenom2002
3 жыл бұрын
Love it
@dave01105
3 жыл бұрын
Love this channel, always good content. keep up the good work man !
@PNWUpperLeft
3 жыл бұрын
Love from the PNW, Great video Austin
@austinniemela
3 жыл бұрын
Awesome! Thank you!
@justinbatchelor2418
3 жыл бұрын
Bro! I just seen that you are over 80 thousand subscribers. I think just a month ago you hit 50 thousand. Hell ya man.
@austinniemela
3 жыл бұрын
Yea man it’s growing like crazy right now!
@justmakeit8688
3 жыл бұрын
Who makes that master cylinder? After my tundra upgrade seems like my pedal travel and feel changed a bit. Even with SS lines
@fixcarchannellifediary5370
3 жыл бұрын
Nice sharing thanks My friend 😍
@truckstreestoys
3 жыл бұрын
Badass for sure but why would you limit off-road performance and on-road comfort with those wheels?
@FlynDirty1
3 жыл бұрын
Paint the skid plate. Very visible with the new bumper and the way it sits high now.
@JEREMY120983
3 жыл бұрын
Good. Even i prefer the pick up 😜 good job!
@austinniemela
3 жыл бұрын
Thanks!
@tradeMark182
3 жыл бұрын
Allright!!!
@constantinegregory3440
3 жыл бұрын
Are you thinking to put exhaust system on?
@hubswafford7775
3 жыл бұрын
Are you gonna put a aftermarket exhaust on the 4runner
@odevious8081
3 жыл бұрын
Man this is awesome
@Robert-ko6wr
3 жыл бұрын
Is the F Runner the family vehicle? You sir, do fine work!
@jo17osorio66
3 жыл бұрын
All your videos fire 🔥🔥
@cstiffy1
3 жыл бұрын
What was the cleaner you used? Is there a reason you didn't use Traditional "Brake Cleaner" CRC, etc?
@austinniemela
3 жыл бұрын
Just some degreaser!
@CORNDODGER
3 жыл бұрын
I got questions You know YOTAS I can get my hands on a 98 Taco I own a SWEET 90 4runner half built! If I swap the complete Drive Train into the 4 runner is it worth it or just do the 5vz swap? Is the Taco IFS stronger?
@chulavistaracing8409
3 жыл бұрын
I need some advice. How can I make my toyota pickup have a whip clouch . I did a conversion with mustang engine
@arnelcoligado8713
3 жыл бұрын
Nice car sir
@wilsonk
3 жыл бұрын
Nice sharing..
@michaeldouglasmason
3 жыл бұрын
What's your plan with the back bumper?
@jadonjanderson769
3 жыл бұрын
Did it help your pinion angle as-well?
@nicholasallen4429
3 жыл бұрын
Hey man! Awesome ride, I just found your channel and already learning so much! Quick question are those fender flares you got stock or aftermarket? My 3rd gen is silver with the stock black fender flares and I want to find some that I cant paint match that will look something like yours.
@austinniemela
3 жыл бұрын
Thanks! These are factory flares!
@jerryduffel3017
3 жыл бұрын
Hey you should have put paint on them break part's while you had them ok 😁
@nosequecarajo
3 жыл бұрын
I wish i could do that to my vitara 96 diesel man!
@Manny-zn3zs
3 жыл бұрын
Love the videos
@92littlebluefox
2 жыл бұрын
Would have been nice to clean and paint the drums with high heat paint.
@thembonesahh
3 жыл бұрын
Are ya going to fab rear bumper. I think that's all its missing
@ALOHAAK
3 жыл бұрын
Aloha from the Hawaiian Kingdom.
@beso4247
3 жыл бұрын
Man if I lived in Washington I would offer you 💰
@ksilva808
3 жыл бұрын
Anti sieze would have been better for the E brake mechanism.
@foresterboy2011
3 жыл бұрын
Hello Austin, just discovered your channel. Two questions... 1st, are you related to Devin Niemela ? 2nd, is it ok to fit Maxxis ap2 allseason and an extremely close in tread pattern Maxxis that isn't an ap2 but has the same speed and load rating ? Advice welcome.
@richardmiller5238
3 жыл бұрын
Do you have to get it re aligned since the front dif drop
@austinniemela
3 жыл бұрын
No it does not affect the alignment
@jreg0028
10 ай бұрын
Its been 2 years, how is everything holding up?
@austinniemela
10 ай бұрын
It has been amazing!!
@bobthebuilder6315
3 жыл бұрын
Hay Austin don't waste your money on part's store brake pads and shoes factory Toyota's will out last them by at least 2-3 times and I also learned to use factory oil filters on Toyotas.
@jrfuapapaqueen3225
3 жыл бұрын
those rims looks sick bro nice! offset?
@user-ti4ot8gx3j
3 жыл бұрын
Салам мне очень нравится такая машина ты класно ее сделал .
@smplyizzy
3 жыл бұрын
Your should have your brother zinc plate that brake hardware.
@iddddaduncan
3 жыл бұрын
Needs R&P gears and a Super Charger
@notesgarage3782
3 жыл бұрын
What size wheels are you running and are you using spacers
@austinniemela
3 жыл бұрын
No spacers, they are 20x10
@notesgarage3782
3 жыл бұрын
Ok thanks the truck looks very good
@michaelsalas5809
3 жыл бұрын
Teach how to make a custom skid plate
@levimonsen1006
3 жыл бұрын
How stiff are the 883s? That’s my biggest worry
@austinniemela
3 жыл бұрын
I thought they were going to be stiff, but they are VERY comfortable!! I am impressed!
@iddddaduncan
3 жыл бұрын
needs r&p Gears and a super charger
@hasanabubakar6917
3 жыл бұрын
Can I order for it here in Nigeria
@abpsd73
3 жыл бұрын
Those e-brake levers are always problematic, especially when the previous owner doesn't maintain them.
Пікірлер: 115