Another very detailed video; it explains everything and is easy for even me to follow! Thanks again John, please keep them coming.
@M0XFXUK
6 ай бұрын
Hi Chris, great to hear from you as always.thanks for the nice feedback, I will do my best to make some more videos regarding projects. I have some repair vids lined up as well which should be interesting as I have 2x 101ZD's sitting in the workshop. 73 John
@christopheriles1469
6 ай бұрын
My apologies John, I haven't had time from work to build the Bandsurfer yet but rest assured, I will certainly build it. The "breadboard" vfo works flawlessly so I'm fired up to build the Bandsurfer. Your excellent videos have made this "do-able", thank you so much for all the time and effort you have put in. Bless you, Chris, G0VOE, Somerset.
@Tokyo1991.JL1AJE
6 ай бұрын
Great content! Noticed half of your parts links are jumbled up. Definitely would appreciate you fixing them. Also where there are purchase options for example the touch screen, it would be great if you could be explicit/specific about which part you used as I’ve purchased items claiming a certain driver being used only to find the size I opted for used a different driver. Have you considered using JLCPCB or similar to offer your boards for on demand purchase. I think you get a cut and it would expand your follower base as Chinese shipping seems to be much cheaper than almost anywhere else. 73 John
@M0XFXUK
6 ай бұрын
Hi John, you make a good point. Apologies I hadn't considered how the part links come out on a phone, I will certainly take a look at this. Regarding the LCD driver IC, I did mention that I was using the ILI9341 in the description but I can see where the confusion came into play. I will update the descriptions to be more specific. On that note, I am planning to add code for different display driver IC's, which driver did you purchase? Regarding JLC, I know this outfit and I am considering using them or PCB Way for manufacturing pre assembled boards. Thank you for the information, much appreciated regards John M0XFX
@paulsradiohacks
6 ай бұрын
Im so going to use this on my Bitx project and beyond!
@GeorgeEI7KO
6 ай бұрын
Great work Johnboy. Looking forward to stuffing one into a cobra.
@M0XFXUK
6 ай бұрын
Hi George, yep it's not long now mate.
@pauldobson8421
6 ай бұрын
Love this VFO. How much of a transceiver is already part of the boards you supply? I’m guessing band pass filters and an RF Amp will be needed to add to the boards to get a basic build? Love it!
@carl-l3z
6 ай бұрын
Beautiful John .... looks to be highly functional .... Thanks for your work! ----- Dean, KL7MA
@M0XFXUK
6 ай бұрын
Hi Dean, no problem it's been quite a fun project to develop. Now we have architecture of the code under control we can add a lot more features. I am currently working on a band pass filter array which can be controlled by I2C and automatically switches in front end band filters controlled by the VFO unit. If you have any ideas for features let me know and I will do my best to incorporate them. 73 M0XFX
@damianzelazny5785
6 ай бұрын
freaking awesome project!
@zl4ssb920
6 ай бұрын
needs rit (clarifier) on a pot ..nice project
@M0XFXUK
6 ай бұрын
Yes, very good point, an RIT is certainly something it could do with. I'm thinking of using a rotary encoder with a push switch but I could also look using a pot. Thank you for the comment.
@paultomlinson528
6 ай бұрын
Wow it just gets better!
@M0XFXUK
6 ай бұрын
Hi Paul. yes it's getting there
@paultomlinson528
6 ай бұрын
@@M0XFXUK and some
@salawalas
4 ай бұрын
Great project, indeed. I'll try to do this myself. Popular and ordinary esp32 Devkit v.3 will be work? I mean esp32-dowd-v3 rev3.1.
@M0XFXUK
3 ай бұрын
Hi apologies I have been busy with work commitments of late. With regards to your question: I am used the ESP32 S3 however; I guess it would work with esp32 Devkit v.3 but you may have to may have to change to GPIOs the code to suit that board. I hope this is of help.
@toolmanchris
6 ай бұрын
All clever stuff John 👍
@M0XFXUK
6 ай бұрын
Hi Chris, it's certainly a fun project
@CBRadioWayBack10-4
6 ай бұрын
so i need to get my old Jumbo out and bring it to you to install this beast of a unit to it..
@M0XFXUK
6 ай бұрын
Oh Yes!!! Hope all is well mate.
@richonguzman
2 ай бұрын
is the consumption of this much higher than the Arduino Nano + Oled version?
@Paul_VK3HN
4 ай бұрын
Well done, thats a lot of work. To squelch the radio do you stop the VFO?
@M0XFXUK
3 ай бұрын
Hi Paul apologies I have been busy with work commitments of late. No the squelch works by the micro controller comparing the signal level with the squelch level and switching on a transistor which grounds out the squelch circuit in the transceiver.
@Paul_VK3HN
3 ай бұрын
@@M0XFXUK Nice work, look forward to seeing it all finished some day, as work allows!
@acestudioscouk-Ace-G0ACE
6 ай бұрын
A great video John, thank-you! As a beginner, could I build this project straight off or am I better to build your Build & Code Arduino first?
@M0XFXUK
6 ай бұрын
Hi, It's pretty straight forward to build and to configure. I feel that the videos are becoming a little fragmented and making it hard to follow for beginners. I am putting a guide together that will go through step by step on how to build and configure the Band Surfer VFO. Keep an eye on this video description as I will add it when I've completed it.
@acestudioscouk-Ace-G0ACE
6 ай бұрын
@@M0XFXUK Hi John, thanks for your reply and consideration, I'll keep an eye on your channel and am working my way through your back catalogue as there is a lot of good information to be found there. Best 73.
@bob_mosavo
6 ай бұрын
Thanks 👍
@M0XFXUK
6 ай бұрын
No problem
@cthoadmin7458
Ай бұрын
I notice in your Arduino code you write the band data you want to store to FRAM everytime you go round the main loop. Is there a limit to the number of write cycles you can do with FRAM? Sorry FRAM's new to me.
@M0XFXUK
Ай бұрын
Hi, You are correct, the FRAM class gets called with each iteration of the void loop. However, the class will only write to the FRAM module via I2C if the value of the variable changes. Also regarding the frequency, the FRAM will only be updated if the frequency value has changed in a 4 second interval. I have done this for two reasons, to cut down on I2C traffic and limit the write cycles when tuning with the VFO. The maximum write cycles for FRAM is pretty good compared to using EEPROM which is very limited. Are you experiencing any problems?
@cthoadmin7458
Ай бұрын
@@M0XFXUK I know some microcontrollers allow you to generate an interrupt on power loss, then have a capacitor to store enough charge to keep the processor going long enough to write stuff to non volatile memory. I guess with FRAM you wouldn't have to bother with this because you don't have write cycle limits. Must try it.
@M0XFXUK
Ай бұрын
@@cthoadmin7458 Interesting reply, yes, you hit the nail on the head as I went though a lot of this while developing the project. I needed to save the profile information and I really wanted to avoid battery backed up RAM to save the data as it's so messy, so at first I was using a voltage regulator with an inhibit that I could control via a GPIO from the controller. Using a constant supply and a standby, when the unit was switch off it could carryout a controlled shutdown with a slight delay and write data to the onboard EEPROM. The FRAM made life so much easier as you don't have to worry so much about the write cycle limitations, not to mention the small power drain when in standby. Thank you for your comments
@pitupongkliangsan410
4 ай бұрын
are you interested to add gps 1 pps output to automatic adjust si5351 frequency stability?
@M0XFXUK
3 ай бұрын
Hi apologies I have been busy with work commitments of late. To be honest I have developed a new Si5351 breakout board with a 2ppm TXCO which has improved the frequency stability and I have also added an FM modulation feature to the new breakout board. With regards to GPS steered frequency stability is not something I have given much thought to. I believe that he type C variant of the si5351 can be controlled by a variety of reference frequencies which would be interesting to see how it performs with GPS locked standard but is not something I have had the time to play with. Thank you for the comment as it's good food for thought. regards John M0XFX
@brownbear1808
4 ай бұрын
Hi ! Is it possible to use regular ESP32 WROOM instead of ESP32-S3?
@M0XFXUK
3 ай бұрын
Hi apologies I have been busy with work commitments of late. regarding your question, Yes I don't see why it shouldn't work however depending what features you use you may need to reassign the GPIO's to suit. Thank you for your comment.
@brownbear1808
3 ай бұрын
@@M0XFXUK Thank you !
@bossdog20
4 ай бұрын
Thanks John very nice project i have sent you an email to order two boards cheers mate from down under Rob VK4AJR.
@M0XFXUK
3 ай бұрын
Not long now, keep an eye on the channel
@SimjetAU
6 ай бұрын
@Toyko.1991. parts list is fine. I ordered all the p0arts I needed including the touch screen from that list it wasnt hard at all. Mine is up and running no problem. It works extremely well. I use JLC myself for my pcbs but also use PCBWay when I get pcb's populated. JLC use a chine supplier for a lot of their parts. I much prefer genuine ones from Mouser etc. as that is what PcbWay use as their p0arts supplierI get pcbs assembled for aircraft engines and prefer to get all genuine manufacturer parts and it not that much more expensive.
@Tokyo1991.JL1AJE
6 ай бұрын
I use PCBWay as well for fab. The parts list format is better when viewed from a desktop. Appears out of sync on mobile if you click from the middle of list as opposed to working through in order. YMMV. Never had a good experience ordering LCDs from AliExpress. Shoddy packaging/cracked screens or bizarre drivers as I said.
@SimjetAU
6 ай бұрын
@@Tokyo1991.JL1AJE I use a desktop or a laptop..cant stand using a phone for that..its tiresome as you stated. The encoders John suggested are very good surprisingly for the p0rice as well. I got it all from Aliexpess inc the touch screens and all arrived fine and well packed. used Johns links. I am waiting on the I2C encoder Adafruit boards...they are coming from Mouser and should be here this week as couldnt find any on aliexpress
Пікірлер: 48