Model: USN-HS06PA
This model has four flow range with different formula
USN-HS06PA-1: 0.15-1.5L/min; F(Hz)=76*Q(L/min);
USN-HS06PA-2: 0.25-2.5L/min; F(Hz)=48*Q(L/min);
USN-HS06PA-3: 0.3-3.5L/min; F(Hz)=24*Q(L/min);
USN-HS06PA-4: 0.3-4.5L/min; F(Hz)=16*Q(L/min);
Function: For the sense of the water flow rate on the following equipments: Thermostatic water heater, water purifier, water dispenser, smart card equipment, coffee machine etc.
Calculation Formula: see above.
Features:
1. Food grade POM (polyformaldehyde) material, environmental friendly material, small, flexible and functional.
2. Intubation design of inlet and outlet pipe, easy connection and operation;
3. Imported Hall IC from Japan, stable and reliable;
4. Flow Range: see above
5. Working voltage: DC4.5-18V; DC24V is available against request.
6. Rated voltage and current: DC5V; no more than 10mA.
7. Output voltage(rated: DC 5V); High level 4.5V and above; low level 0.5V and below
8. Pulse output duty cycle: 50+-10%
9. Insulation resistance: 100M Ohm and above;
10. Tightness: Seal up all the holes, and inflate with 0.8MPa water, after 1 minute, no leakage and deformation;
11. -20-60 centigrade;
12. Working Pressure: under 0.8Mpa;
13. Electrical Strength: AC500V 50Hz.
14. Wire length: regular 15cm/32cm, other length can be tailor made against request.
15. End connection: SM2.54 Plug/ XH2.54 Plug.
16. Low power consumption model can be tailor made(10μA)
Note:
1. When magnetic material is close with the sensor,its characteristics may vary.
2. In order to avoid particle debris, the sensor must beinstalled after a filter.
3. The flow sensor installation has to avoid strong vibration and shaking of the environment, so as not to affect the sensor's measurement accuracy.
Негізгі бет A Look inside USN-HS06PA Hall Effect Water Flow Sensor
Пікірлер: 4