Head to keeps.com/mechagaikotsu to get 50% off your first order of hair loss treatment.
@depshallburn
3 жыл бұрын
Do you use plastic cement to keep it on the scalp?
@chandrapalihakkara4581
3 жыл бұрын
Hey Mecha Gaikotsu, at 17:04 same this when something is gonna fall when I pose. 👍 respect🙏🔥✌️☺️💯 (❤️ u're vids mate)
@mdfaenotjoey7132
3 жыл бұрын
Wait is the mg needle out? If it Is Have you revised it
@anime-mun
3 жыл бұрын
This MG degrades fast. Just a warning.
@markbeasley2156
3 жыл бұрын
wholly crap I didn't expect how the mg zeta Gundam 2.0 was that good. please do a custom exia mg with the mg 00 quanta backpack on your next review please Mecha Gaikotsu
@kamillebidan364
3 жыл бұрын
As a fan of the Zeta Gundam MS who has almost built them all, I have to say the PG Zeta is the best one overall because is more solid, stable on the ground, and has a better transformation process than the MG Zeta. IN case someone wants to build the PG Zeta... it will be the longest build you will ever do as a gunpla builder, but it will be rewarding in the end.
@MisterLeoMinecraft
3 жыл бұрын
I was thinking of buying it, but your review convinced me to get it
@daniely8947
3 жыл бұрын
I love my pg zeta... The frame though. It's a little weak compared to newer pg's. Trouble holding its arms up after 15 years
@kimchicat2227
3 жыл бұрын
do you think longer than a PG Unicorn?
@kamillebidan364
3 жыл бұрын
@@kimchicat2227 yes, I built the PG Banshee since it is the same thing as the Unicorn, and it was not even close. It took me almost two weeks days to finish the Zeta in comparison with five days to build the banshee with the LED light system. I don't paint my kits also, so it was pretty much a straight build.
@reidge4479
3 жыл бұрын
Well i do think PG Zeta is the holy grail of PG not only Zeta though. it and older PG RX-78 mechanical design feel like a perfect replicant of what a real robot can be, more than any mordern PG.
@chasinthroughthedecade
3 жыл бұрын
Now if only the RG took notes from this kit; nevermind if it's difficult, as long as both modes are solid.
@reidge4479
3 жыл бұрын
Actually MG should take note form RG Zeta. The only thing RG Zeta lack is a locking method for stability especially in the hip joint and the chest. Hip joint of RG Zeta is more "realistic" engineer than MG or even PG. And RG Zeta has a rotating cockpit which only PG and RG has. Early RG tend to loose over time because they try to pack a lot of PG feature into a freaking small kit. Newer RG try to tone down all of it and make it like a small scale MG. TBH PG Unicorn and Exia don't even have the same level of mechanical design like these early RG.
@Zero8764
3 жыл бұрын
im afraid to transform the RG one so i just keep it in MS form and its just sitting on my shelf
@blvk3
3 жыл бұрын
actually, RG is basically the same kit as the MG 2:0 all the internal parts are virtually the same, if not better, thats including the transformation the issue with the RG is the size, parts are smaller and therefore thinner, resulting in lack in strength in a lot of places
@reidge4479
3 жыл бұрын
@@blvk3 actually RG has many differences compare to MG 2.0, Shoulder-Chest transformation joint is different, Hip, front skirts joint is different, knee joint don't have locking method like MG and RG cockpit can rotate for both mode. And to be fair if bandai add some robust locking method in hip joint, RG zeta will have much stable hip transformation than MG or even PG but they can't due to the size.
@kennethscott6533
3 жыл бұрын
@@Zero8764 same but I just don't look at it because it might spontaneously fall apart
@PaoloAlexisFalcone
3 жыл бұрын
This kit was a godsend for those who suffered building the 1.0 MG (which Katoki Hajime designed in 1996) back in the day. I still remember rushing out to buy the kit back in 2006 when it became publicly available in my country.
@leomoshes2791
5 ай бұрын
Mg 1.0 is okay. Solid enough except for the floppy backpack, looks cool. Old but decent. Ironically, it can be considered as ver.Ka. And it is more “Ka” than zeta ver.ka, jugding by the interview in the ver ka’s manual.
@jesjay25
3 жыл бұрын
The Bald Barbatos had me dying cause I'm currently working on a kit bash on the Lupus rn lol
@robloxboy1103
2 жыл бұрын
Yeah it funny not going lie
@andreassetiawan7773
3 жыл бұрын
Zeta 2.0 might not need an update. It has the classic look that surprisingly holds very well until today. But seeing the latest bandai gunpla engineering, I honestly want them to go ham (but not overboard) with zeta to aesthetically taken as sleek and as modern as possible in the MG kit form, joining the ranks of the ver kas like its brother ZZ and the revamped wing zero. Imagine how killer it would be. Ah. They really should do that as I am still waiting for the revised C1 and A1 MG as well.
@muugu_14
3 жыл бұрын
Oh god man, I will do ANYTHING to get a Zeta Plus C1 MG with Bandai’s current model engineering.
@yungmegvtron
3 жыл бұрын
@@muugu_14 the only update i would give to the zeta would be the addition of the universal jounts on the legs and the wing/seed style hands(swapable fingers)
@ronjonronald6645
3 жыл бұрын
Yeah I'd love to see a "2.5" that maintains the look but maybe adds a bit more color separation and updates the plastic, like the F91 2.0.
@zarukegansarina
3 жыл бұрын
Yes.!
@caesarhiro3630
3 жыл бұрын
With GFF Zeta Gundam release, I think someday they release Zeta Gundam Ver.Ka Oh yeah... I also want to 2.0 ver of A1 and C1. Especially Hummingbird!!
@Ra3_ar1adnE
3 жыл бұрын
This was my second ever MG I got from my late grandma as a kid and I'm still surprised most consider this a complex build lol still one of my favorites and love the engineering of this. Hoping we'd get a PG Unleashed of the Zeta one day.
@vissermatt1058
3 жыл бұрын
i kinda just want a declaration of a PG UNLEASHED line. it tooke lik 10 months for my "pre-order" to get fulfilled for the rx 78.... and im FULLY willing to pre-order the next UNEASHED model - whatever it will be
@Dracobyte
Жыл бұрын
What was ypur first MG?
@UMIF001
3 жыл бұрын
Older Master Grades are sometimes comes with nice Action base Like the original MG F91 for example, it comes with Lafresia as it's base, but now Bandai is most likely sold the action base separately
@shahfiee754
3 жыл бұрын
What is the other kit beside Zeta and MK II that come with nice base?? Kind of curious tho
@michyoungie
3 жыл бұрын
@@shahfiee754 MG Aile Strike (both the original and RM) came with the Archangel launch platform, while not as nice the MG Freedom 1.0, Strike Freedom, Destiny and Nu Ver Ka. came with personalized bases (the base is in the pattern of Amuro's symbol for the Nu, and the Wing shape of each suit fr the Seed kits).
@titan133760
3 жыл бұрын
They probably want to have more uniform looking action base to keep costs down
@boeingnz
3 жыл бұрын
The base now come with the special color ver 2.0 I think.
@zacharyradford5552
2 жыл бұрын
Yeah but there’s some that need that little extra for being iconic.
@elipse371
3 жыл бұрын
I'd also like to see a Hyaku Shiki 2.0 review to round out the Zeta Trio
@bibo1662
3 жыл бұрын
me tooo!!
@ralfsstuff
3 жыл бұрын
Spoiler. It's great. But i'm guessing you already know that.
@elipse371
3 жыл бұрын
@@ralfsstuff correct
@ralfsstuff
3 жыл бұрын
@@amuroray88 Some people value anime accuracy. Others technical innovation such as parts separation, gimmicks, mechanical detail, engineering and so on. Both are great depending on what you like.👍
@alvarodiogolopessousa5911
2 жыл бұрын
we still need MGs for Methuss and Dijeh , or Rick Dijeh for the entire group
@badopinionsrighthere
3 жыл бұрын
Wow, a transforming model kit that doesn't look disappointing! Definitely gonna have to add this to the list of kits to get
@V2ULTRAKill
3 жыл бұрын
Kyrios would like a word
@ginopascual7946
3 жыл бұрын
@@V2ULTRAKill doubt it. Kyrios looks hella awkward from below when in flight mode. You could literally see the head and torso
@V2ULTRAKill
3 жыл бұрын
@@ginopascual7946 then you use a different display angle Sure it doesnt look good from all angles like Zeta, but it has the best ms form articulation of any transforming kit and flight form looks good from enough angles to look good on display, plus transformation is much simpler.
@ginopascual7946
3 жыл бұрын
@@V2ULTRAKill tbh I'd rather not display a kit in MA mode if it doesn't look good in every angle, but that's just me. You do you bud. Cheers
@V2ULTRAKill
3 жыл бұрын
@@ginopascual7946 thats fair on your end I tend to not fuck with my flight forms once theyre on display other than to keep them clean etc, same thing i do with my hand grenade kits so as long as they have at least one photogenic angle its chill with me
@bojox3m2
Жыл бұрын
who's here after the Z ver ka announcement?
@dicksonZero
3 жыл бұрын
quite a few years ago i was like "i want to buy a kit to learn the Zeta transformation!" and i got this kit. It was so satisfying to transform it but is also a pain to build because of lots of nubmarks to clean. i also needed to paint the parts to hide the processing i needed to do to it. it's still on display at home
@NekRulez
3 жыл бұрын
I have this kit too and it took me 4 months cuz I had work and life but becuz it was my first kit in over 5 yrs after quitting and I wanted to panel line it completely, it was a nightmare to build. That said, I absolutely love this kit, don't regret it at all, that said, this kit single handedly killed any desire I have to build any MGs cuz I don't have the time and patience for them anymore.
@bee-beargaming
3 жыл бұрын
That Keeps joke about the Barbatos losing it's hair was funny
@goldenbunbuns7295
3 жыл бұрын
Ive gone Baaaaaaaallllllllddddd
@diegopoke1
3 жыл бұрын
I need a barbatos with hair now lol
@justacheeseburger6011
3 жыл бұрын
Barbatos has hair ???😱😱
@mokujin6507
3 жыл бұрын
Baldbatos?
@Sth809
2 жыл бұрын
So zaku always has been bald? Other than those that have fins on their head
@sapientanomaly
3 жыл бұрын
I made a mistake and made this my first ever MG to build when I was still starting out. I'm happy to say that its still alive today but I wanna get another one and build it properly this time. Even so, this is the kit that made me fall in love with gunpla.
@joetindle5884
Жыл бұрын
Congrats for having the first Ad I haven't immediately skipped in a long, long time
@sammyc38
2 жыл бұрын
I would love to see a 3.0 of this one. Zeta is my favorite gundam. The classic look of the gundam is beautiful.
@zacharyradford5552
2 жыл бұрын
A ver KA that in the realm of ZZ and Wing Zero.
@declan2775
Жыл бұрын
@@zacharyradford5552 wish granted lol
@Zephyrs009
3 жыл бұрын
It's always fun to watch your older kit reviews because they can be so over the place in how much I agree
@watashiwabryan3741
Жыл бұрын
0:47 As someone who built the RG Z-Gundam..... I just found this really funny. Hahahaha..
@Sweet_Clod
2 жыл бұрын
This was the 4th mastergrade i built, and it was a really good process! i remember one step in the build process being very awkward but rest was very satisfying. Can for sure tell Bandai’s engineering has improved since this model since i built a more modern mg right before and it was slightly jarring at first. 8/10 for sure!
@TheMatheus0512
Жыл бұрын
Who else came here after the Ver Ka announcement?
@mathieurobichaud1238
Жыл бұрын
I'm just gonna say that on mine whilst transforming some parts broke, and now i dare not touch it, but overall, i prefer the pg zeta, tho more tedious to build due to the leds, in the end I found the result more rewarding and personally I find the transformation to be better and more fun.
@saabastiana4111
3 жыл бұрын
A MGEX Zeta would be crazy, or even a 3.0
@blvk3
3 жыл бұрын
thats called the MG ZETA plus, you're welcome
@casvalcat3546
3 жыл бұрын
Just make MG Zeta ver Ka.
@PaoloAlexisFalcone
3 жыл бұрын
@@casvalcat3546 Katoki should redeem himself there given that the disastrous MG Zeta Gundam 1.0 was his design.
@fantastiCkiLler92
3 жыл бұрын
@@PaoloAlexisFalcone Or just get the MRD Zeta, Katoki's design is everywhere
@casvalcat3546
3 жыл бұрын
@@fantastiCkiLler92 I know Metal Robot Damashii exist but what if they actually make as ver Ka MG. Note, the MG Wing Zero EW Ver Ka out even after they made the Hi-Resolution & Metal Composite ver. We barely have MG Zeta kits too. Unlike countless MG Exia, Unicorn,Astray and RX-78-2. It would be better to have modern updated MG Zeta and display next to MG Hyaku Shiki 2.0 and MG ZZ ver Ka.
@theturnc0at
3 ай бұрын
Considering the boots it had to fill, its even more impressive how the Zeta Ver.Ka has cemented itself as one of the GOATs of all gunpla.
@benjamingregory5424
2 жыл бұрын
I just picked this kit up and haven't started it but very excited to try it out now
@TheJaka221
3 жыл бұрын
I also couldn't get the beam gun to stick to the arm, but since I painted my kit, it was a little more stable.
@theodoredexter6540
3 жыл бұрын
1:14 I love how you used the nadleeh because it's the only mobile suit with some kind of hair (correct me if I'm wrong)
@Desfes
3 жыл бұрын
The Nobell Gundam would like a word, kind sir xD
@theodoredexter6540
3 жыл бұрын
@@Desfes I completely forgot the Nobell gundam
@ignisofficialgaming
3 жыл бұрын
If this kit were to get a 3.0, I think it would probably be like the Granddaddy 3.0 where it looks like the RG just on a larger scale, so it could be good but it’s not necessary at the moment
@caesarhiro3630
3 жыл бұрын
With GFF release, could be there's chance for Ver.Ka
@zacharyradford5552
2 жыл бұрын
They need to give it to Katoki and then pray it will be in the realm of the ZZ and Wing Zero.
@ignisofficialgaming
2 жыл бұрын
@@zacharyradford5552 that’d definitely be awesome to see
@davidgill7412
2 жыл бұрын
All my model kits are gone. If I ever start again, I'm re-buying this one.
@Danboo21531
3 жыл бұрын
Perhaps among the reason we doesn't have 2.0 or ver.KA yet is that Bandai's engineering division is still having difficulty on topping out this kit without turning it into a hand grenade.
@Lancernoevo
Жыл бұрын
Finally! I'm honestly excited to sew that Zeta is finay getting a 3.0 technically (the MG Ver.Ka) in 2023!! Nearly 20 years since we got a MG Zeta
@YiminyCricket
Жыл бұрын
ok so now we're getting the Zeta Gundam Ver Ka so I wonder how the 2.0 will stack up...
@neometallX
3 жыл бұрын
The RG Zeta was a NIGHTMARE, at least this MG got the guts (as in more Stabilized) from the "Hand Grenade diesease"
@Gay_Priest
3 жыл бұрын
I had a lot of fun with the RG rx-78 and Char’s Zaku. How does the Zeta compare to them?
@mikloridden8276
3 жыл бұрын
@@Gay_Priest Its more fragile than those two and pieces dont stay on
@Gay_Priest
3 жыл бұрын
@@mikloridden8276 good to know
@gundambuilder2129
3 жыл бұрын
17:05 hahahahaha the most funny thing I seen today
@Kikomatsing316
3 жыл бұрын
You forgot to say, This version of Zeta is anime accurate. RG, HG, and even PG couldn't capture the anime look. Zeta 2.0 has been in my wishlist for a long time. This might be my 26th MG kit. Thanks for an awesome review. You and jabman025 really poisoned me to buy these gunplas
@whiteraven1992
3 жыл бұрын
Which is interesting, because aren't the RG's supposed to be the anime-accurate ones? ...Or are they just the *_most_* detailed, period?
@SpaceBot-pp9yj
3 жыл бұрын
@@whiteraven1992 RG's are supposed to represent how an MS looks in real life, with the details.
@masterkent1
2 жыл бұрын
the old HG and the HGUC are both anime accurate tho
@teykengwei
3 жыл бұрын
Definitely my Top 5 Gundam design.. Really hope Zeta is the next in line to get a MG Ver Ka treatment!
@zacharyradford5552
2 жыл бұрын
Then hope it’s in the realm of the ZZ and Wing Zero and not a cluster.
@adudewholikesgunpla
3 жыл бұрын
Never thought I’d see mecha rank a 16yo kit as platinum tier
@itsmepamz2477
3 жыл бұрын
Maybe if he reviews it before Platinum tier came out, MG Zeta 2.0 will absolutely getting Gundarium tier.
@redxphantom7787
3 жыл бұрын
I love how he puts Nadleeh in the first scene when he advertise Keeps lmaoo
@ChrisTian-sd5yq
3 жыл бұрын
who else have hair like features???
@ChrisTian-sd5yq
3 жыл бұрын
also you can't put mobile doll cause they're not Gundam
@redxphantom7787
3 жыл бұрын
@@ChrisTian-sd5yq ofc nobel gundam
@darkmikasonfire
24 күн бұрын
I've been putting one of these together, thanks to your video I realized the arms for me were super loosely attached and pushed them a lot harder to get them where they belonged, thanks for that, I know that wasn't intended but so many times when I'm like I don't know if I've done this right I look up one of your reviews to see if mine looks the same or not lol.
@exia7684
3 жыл бұрын
Waiting for Nadleeh on the hair ad.. not disappointed!
@faizizz4062
Жыл бұрын
Don't know how I missed this one video but 17:03 really got me wheezing. I understand that feeling all too well.
@tanukizzy
2 жыл бұрын
I finally got the opportunity to purchase this kit at a good price a whole year after this review was put up that put this kit fully on my radar, and I have to say, it's a very, very good kit. I think think this kit could've been better if it was made now, of course, but considering its release year of 2005 this kit is insane. Really my only gripe is I'm just not a fan of all the triangle notches and more minimalist look- I know 2.0 master grades are meant to be more anime accurate than detailed, but I still wished it had more- and I really hope that one day, Bandai decide to revive the 3.0 line and give us a 3.0 Zeta with the RG look. If the kit wasn't so inconsistent with its inner frame, I'd say the RG Zeta is my favorite kit, because the design of that kit is just amazing, and I'd wish Bandai would revive the 3.0 line purely to just give us a 1/100 Zeta Gundam with the RG's detail and design. Either that or a Ver. Ka, which would be just as awesome.
@eitanr
Жыл бұрын
What do you think of the new Zeta Ver Ka?
@tanukizzy
Жыл бұрын
@@eitanr I am very excited. Of course, I personally would've liked more detail, but I'm a huge fan of the updated proportions of the Ver. Ka and enticed by the new inner frame and its transformation. Some of the seams that are made by the color separation are eh, and the removal of the hyper mega launcher and a dedicated base is upsetting, but overall I am very excited. Going to pre-order the hell out of it when I can.
@Viper-jr4sp
2 жыл бұрын
Finished building it a week ago turned out awesome only minor issue was getting the head to snap together because it now has a bit of a gap at the front where the V horn is and the vulcans dont stick out all the way tried many times and alot of pressure but it doesnt seem to fit but it still looks fine with a bit of the gap other than that its a good kit
@MegasRocks12
Жыл бұрын
same
@jfbeast
3 жыл бұрын
The Amuro's White Unicorn recolor is the true MG Legend
@elnavales
2 жыл бұрын
Next time I'm in Japan, I'm gonna search the used toy shops for a HD Color Version of this kit...AND the Amuro white one as well. I LOVE the Zeta!
@koimaxx
3 жыл бұрын
Dang, got spoofed by that chime in the beginning -- thought I'd received a message on my phone XD
@stephensynanta9320
3 жыл бұрын
Interested to do Rezel next? It share similar transformation as Zeta, and its not too old, around unicorn old.
@desvinagung
3 жыл бұрын
My First ever Gunpla back in 2013, just straight go to MG even i don't have experience build a gunpla before MG Zeta 2.0 :D
@reggie5019
3 жыл бұрын
youll definitely gonna the love the pbandai variants.. gray zeta and red zeta.. totally different look but same body
@Waverider-Zeta
3 жыл бұрын
You did it! You've reviewed the kit I've been waiting for!
@kiraramax2066
Жыл бұрын
you can fit a perfect grade gundam beam saber effect part in the hole of the hyper mega launcher.
@jason5890
2 жыл бұрын
I just purchased the zeta today. It will be my first kit :)
@dhafinikramkusuma8684
3 жыл бұрын
1:05 Barbatos: (literally became bald) YT caption: *i'Ve GoNE bOoOoOOoomMmmM*
@seancris4525
3 жыл бұрын
My Mg zeta Gundam didn’t age well, good thing i saw your Joints tightening video it helped a lot
@g-maru8486
3 жыл бұрын
laughing at the 2 fingers you waved when transforming the kit. hahaha
@Coolio_Ash
3 жыл бұрын
I still want a rg 2.0 line. Come on bandai you KNOW you can do better with the zeta.
@marvinjasonlopez3623
Жыл бұрын
Re-watched this because of the new Zeta Ver. Ka. Please review the new ZETA Ver ka and compare it to Zeta 2.0 side by side. More powers man!
@vanerek
3 жыл бұрын
OMFG, the bald Barbatos killed me XD
@elipse371
2 жыл бұрын
18:31 So basically the Zeta Plus and all it’s variants
@riovannes5701
3 жыл бұрын
Omg I had a chance to pick this up at Galaxycon but passed on it
@angriestchezburger
2 жыл бұрын
The Zeta Gundam is in my top 5 for mobile suits I hope are the new Ver. Ka. There's the Pale Rider, a 2.0 of the Rx-78, Ground gundam, Zeta Gundam, and Tequila gundam, in no particular order
@eitanr
Жыл бұрын
What are your thoughts on the newly announced Zeta Ver Ka?
@angriestchezburger
Жыл бұрын
@@eitanr I think it looks great! I love how vivid the colors are, but at the same time it doesn't seem like that much of a big change compared to the 2.0 in the visual department. I'll still probably pick it up though
@admiralstiffplank
2 жыл бұрын
It's my first and only Master Grade and I love love love it. I might buy another one to display in wave rider mode!
@yuniasabed
Жыл бұрын
ver ka version is coming very soon :)
@starrieyedGirl
3 жыл бұрын
The transformation looks like that of the Delta Plus
@SparkRattle
3 жыл бұрын
I have a few addendums to this as I have owned this kit since 2005. First, it will take a few years but the knees have a bad habit of loosening up after a while. It may have something to do with plastic wear but it will happen, a flaw that the MkII 2.0 does not share thankfully. Second, the catapult foot mounts between the MkII's and the Zeta's are different but interchangable on either base so you can pose the MkII launching while the Zeta is being prepped by the space crew. This kit is great on its own but best when paired with the MkII set.
@guide198
2 жыл бұрын
Best advertising award so far
@spartanvenom5388
3 жыл бұрын
I kinda want to paint a Zeta Gundam kit with a starscream color scheme
@RileyZilla1001
Жыл бұрын
I gotta be one of the few who prefers dry transfer decals. I can never get water slides to work; more like "water scrapes" or "water slip and gone forevers". The dry transfers, I just use my thumbnail. I wish they still made them.
@vieoru6892
Жыл бұрын
Here for whether i go for this or Zeta Ver ka
@fl_keeper1137
3 жыл бұрын
The Zeta Gundam is one of favorite MS and I use it in mobile suit gundam battle operation 2 all the time in quick matches
@xviza9000
3 жыл бұрын
Never thought I would've seen this review happen.
@Hakumai_o7
3 жыл бұрын
I'm desperate for a ver ka Zeta Gundam. It's been long enough bandai, a new Zeta would be appreciated
@desireless4092
3 жыл бұрын
My no 1 suit. Zeta has a timeless and slick design.
@ludovicocammisa9320
3 жыл бұрын
"Not just a shield on the back of the head" He says, while mounting the shield on the back of the head
@hypershock0storm479
3 жыл бұрын
Isn't it in front of it's face?
@TheGolux
3 жыл бұрын
yeah, but not *just* that. the entire torso reconfigures before the shield gets added on.
@nitsuga13
3 жыл бұрын
Did you maybe miss a Polly cap on the wrist for the attachment of the rifle and if you love this one you will love the perfect grade
@sebastianlynch5440
Жыл бұрын
i like the thing with barbatos
@noOtherFs
3 жыл бұрын
Wait that thing is from back in 2005?? I think I got the 1.0 back around 2008 because for some reason they were the only ones available at the store and that kit REEEAAAALLY makes it clear the reason why there was a 2.0
@magiquemyke4824
Жыл бұрын
8:00 then comes ver. KA! HAHAHHA
@ahmadimanzulkifli6859
3 жыл бұрын
Wishing for MG Infinite Justice review next
@Dv-ye5sd
3 жыл бұрын
When is that Barbatos lupus custom gonna seee the the light of day?
@Etheoxa
3 жыл бұрын
The OG waverider mode still can't be beat
@marsman.4548
3 жыл бұрын
0:48 When you had enough sh*t about bad gunplas.
@jetset102
3 жыл бұрын
Maybe a PG unleashed Zeta Would be a game Changer?!
@waffy_kun
2 жыл бұрын
Now it just needs a Zaku Head 2.0 and it is perfect.
@vizzyboi1829
3 жыл бұрын
The shoulders ball joints on mine have literally zero friction and fall off from gravity alone. Other than that tho, I love it.
@darrentao2007
3 жыл бұрын
Zeta ver 2.0 is a platinum tier cool!
@DerpEye
3 жыл бұрын
I've built this 13 years ago, and it's still pretty good. Miles ahead of the 1.0 i too own.
@DadGamer1984
2 жыл бұрын
I've yet to build this due to fear of transforming it. How is it? That transformation step with the legs hip joins and skirt part scares me.
@anitafoongpg595
3 жыл бұрын
Oh i remember this is Zeta Gundam very long time ago.
@harbingerd.8457
3 жыл бұрын
Maybe I should have got this rather than the Full Armor Unicorn Ver. Ka
@riovannes5701
2 жыл бұрын
I finally got this kit finished.... love it
@JohnSmith-is6uz
3 жыл бұрын
I really hope Bandai will make Zeta ver. Ka soon
@Sazabi4prez
3 жыл бұрын
Can't wait for either/both P-Bandai Zetas with their 120+ sticker sheet each to make Mecha cry his way out of building them
@kite0impulse
3 жыл бұрын
I really wasnt expecting a hair loss ad from a gunpla review video, but I'd be lying if I said that the barbatos didn't make me laugh out loud🤣
@darkfent
3 жыл бұрын
Yes mine still holds up after 3 years
@U20101954
3 жыл бұрын
ok now i want 3, one stays in ms mode one stays in waverider mode and one painted in us navy's jet color scheme🤤
@vustvaleo8068
3 жыл бұрын
so this old MG ages like fine wine.
@simonblanjean6538
3 жыл бұрын
Hell yeah, I'm building it right after the 2.0 Hyaku shiki
@IRJOE5
3 жыл бұрын
Man I have had this kit since its release! Still in one piece and I have the whole "Gundam Team" all together 😎
@MultiQsan
2 жыл бұрын
I wish they make a ver Ka to match ZZ
@Mogura85
3 жыл бұрын
that brings me back, i had the old mg zeta
@gregboggs2708
Жыл бұрын
I love my 2.0 but can't wait to have the ver ka next to my zz ver ka
Пікірлер: 460