Paydirt picks up a new D8T then we go on a tire run to get some new scraper tires, and wow do I get some cool stuff this week from some Awesome friends www.gogotape.com
For Hats and Calendar's GO HERE----->www.jpaydirt.com/ Check this out---- instagram.com/jpaydirt/ Old Kenny Coloring Books-------->www.amazon.com/Old-Kenny-Semi-Truck-Coloring-Book/dp/1724398199/ref=sr_1_1?ie=UTF8&qid=1533523771&sr=8-1&keywords=old+kenny+coloring+book LOOK-------facebook.com/Jpaydirt/ Want a Tool Crown tool box go here toolcrownamerica.com/ Want to send a check to help Shane Persons C/O Anderson Construction 858 W 100 S Blackfoot ID 83221 kzitem.info/news/bejne/yn6brmmZpWl7eqQ
@leebarnhart9725
5 жыл бұрын
New D8T? You are pooping in tall cotton my friend!
@Military-Museum-LP
5 жыл бұрын
Jeff I’m not the one receiving these wonderful gifts but I swear I can feel the emotions this fantastic group of people who follow your channel. Jeff there are allot of people all over the world who really really care about you and your family. 99% of these people will never meet you ( me included) but we are indirectly part of your life. Thank you again for sharing your life. Carlo in Italia
@dougstubbs9637
5 жыл бұрын
The old unregistered farm truck you overtake at 1515 are something we still come across outback here in Queensland Australia, though getting thin on the ground. He is very smart keeping it to 35 mph, in those old Looselybuilts any faster and hit a bump, the front end would jump six foot, one way or the other. Left or right, no way of guessing, turn drivers into nervous wrecks. Got my trailer license in 1979 in a Louisville,903 and 13 speed bushranger. Most uncomfortable bucket of puss to drive.
@aussiebloke609
5 жыл бұрын
Two minutes in, and I couldn't help laughing aloud at the "intermission" music when you stopped for coffee. Great timing there. :-)
@alleycat1084
5 жыл бұрын
I laughed out loud when the music slowed for the stop and resumed when he got back on the road! Funny as hell! Thanks for the good content Jeff.
@-mike--m-9629
3 жыл бұрын
Ha... He probably stopped to take a dump 💩
@joelhenderson3951
5 жыл бұрын
D8T is a mighty horse. I've run one many times and it was very good to me filling mud pits and ripping rock in the oil field.
@jimzivny1554
5 жыл бұрын
At 3:50 you can see the jamnut for the yoke on the Switchblade is lose.
@mikeaust1698
5 жыл бұрын
Hi Jeff, great video, been a subscriber for a couple of years now. Drove Cat D6s for land clearing in the late 60s in South East South Australia. Then in the 70s, worked for a logging contractor in the Tasmanian Highlands puttting in log access roads. The contracor had a D7 for loading logs and carving out the roads. For me he had a D4 dozer levelling the gravel, a 933 loader with a wonky pilot that required using the winch on Skidder to tow start it each day and an early Cat12 grader for tidying up. I was paid by the hour for my tip truck ($6.00 per hour). Most of my hours were spent driving his equipment. Spent a few years driving semitrailers on local deliveries in Melbourne, Victoria. These days drive a powered wheelchair, since I lost a leg 10 years ago. Look forward to your videos. Cheers, Mike Austin, Adelaide, South Australia
@Only-one-life-68
5 жыл бұрын
Jeff You have more friends around the world than you could imagine.. We all love your videos and your knowledge but mostly your great hummer..
@pinstripes100
5 жыл бұрын
Enjoyed the ride through rural Idaho courtesy of the big green KW. One thing I did notice is that in Idaho gasoline is practically free. $3.00 a gallon is cheap compared to the $1.27 a litre I paid on the way home this afternoon.
@evervigilant
5 жыл бұрын
When you come across two trucks stuck like that aren't you supposed to dump a bucket of cold water on them?
@colinporter7604
5 жыл бұрын
Your jam nut is loose on the turbo, you probably noticed already just in case you missed it😃
@jimzivny1554
5 жыл бұрын
Good update, great scenery during the drive. Nice deal on the tires. Nice gifts from your extended family.
@chriscreech716
5 жыл бұрын
I have a farm tractor with BKT tires they are 9 years and look like new. Have a good week.
@TheRebelOne.
5 жыл бұрын
The lock nut on your switch blade turbo is loose, but then again you already know this!!
@stephenwagar2663
5 жыл бұрын
I Almost Fell Out Of My Chair When You Were On The Lawn Mower In The Shop !!! Almost As Funny As Being In The Blue Room , Some Time Back . As Usual Big Thumbs Up !!!
@muddawgkomm9642
5 жыл бұрын
Holy! Cleared the earwax outa my canals with that turbo whinding up!
@papaw5405
5 жыл бұрын
My Cat dealer works out of a motel room. She sells only one part but it is the only part you need.
@Jpaydirt
5 жыл бұрын
ROFLMAO
@markharvey9537
Жыл бұрын
Hey Jeff coolant on drive belts will make one chirp and make all kinds of noises. Been a Lincoln Mercury tech for 25 years. When customer wouldn't buy a new belt several of us techs found if you take a handful of floor dry and a transmission funnel and with the engine running put the funnel at a pulley that the belt feeds into you drop oil dry through the funnel and let in get pulled into the belt and pulley the noise goes away really fast. The oil dry soaks up the oily residue from the coolant and the grittiness makes the belt grab the pulley much better. Never had any customers come back with a belt chirp or noise. Love your videos. Always looking for new one. Your a great day helping out you son. I do all my son's the same way.
@mrmiscast
5 жыл бұрын
You can tell when Jeff is in a good mood, and it's fun. Loved ID when I got to travel there. Such a beautiful state and while Jeff lives in a great place I really liked the Western side of the state a lot, as well. He's right there are a lot of good people there.
@JRRACING1327
5 жыл бұрын
Your jam nut is spinning actuator shaft ( I hate when my jam nut spins on my shaft...Har, Har) Still shakin in the desert of Californication. Definitely one of your funniest videos especially the elevator music rest stop.
@iusetano
5 жыл бұрын
Awesome to see you doing tricks on the fancy equipment in the shop. Club Cadet I think it is. Excellent video Jeff.
@marshritchie4071
5 жыл бұрын
Hi from New Zealand , love the Fonterra Milk Tanker model on your bench too 🇳🇿🚛👌🏼😉
@DieselDoc78
5 жыл бұрын
i am sure others have pointed it out but wanted to let you know the jamb nut for the clevis on the SwitchBlade was loose. Another good episode! thanks Jeff!
@jayhambrick
5 жыл бұрын
Brings a whole new meaning to the term, "measure twice"! Lol
@johnnyholland8765
5 жыл бұрын
While it is just another day in the saddle for you I remember how much I used to enjoy hauling a piece of equipment on a good flat open stretch of road. Just open her up and go. Sure have some beautiful country where you are. I bought some BKT tires for my tractors and so far no problems. I think they are good tires. Enjoyed the country ride...........
@kengamble8595
5 жыл бұрын
Hey thanks for the shout out Jeff! 😊 Think I need to head up north to Idaho, looks a whole lot cooler there, this 110 plus degree temperature is getting to be a real drag ! Thanks for sharing and take care. 👍
@kevendavis5812
5 жыл бұрын
No Jeff we don't need any more Californians in Oregon we have too many now.
@Brandon-wh8hr
5 жыл бұрын
we are getting over run here in WA as well
@portnuefflyer
3 жыл бұрын
I set all those multi colored siding panels on that CAT building, :20, plus a bunch of other work, with my 30 ton National boom truck. It was great work as my crane yard is right down the street about a mile. Maybe you mention it, but that big old hangar was built for the never built, or at least flown, atomic powered airplane they were working on out at the the Site, your tax dollars at work! Good to see the stop in Blackfoot, guess I'm not the only one that needs to get extra coffeed up before driving across the desert. Been craning in Mackay area 6 times this year.
@thomasmckelvey8961
5 жыл бұрын
Hi Jeff, that is nice Care Package Curtis sent you, the wonder at the shipping cost evaporated immediately upon seeing that box of rod! If you haven't got a Rod Oven, find a smaller old refrigerator & wire a flood light fixture in the bottom. A 100W Flood Light will keep your rod dry & plenty hot- outside, 150Watt.
@frotobaggins7169
5 жыл бұрын
was the jamb nut on your switch blade turbo loose? it looked like it was spinning.
@cncsmith35
5 жыл бұрын
I was laughing when you said Idaho was full, but my laugh went away when you said go to Oregon, because I live there and my dad is always bitchen about the Californias and keeps saying were full go to Washington😂
@D1KHEAD808
5 жыл бұрын
UPS guys busted comparing packages...
@dozingnsloping6814
5 жыл бұрын
That's funny as hell. I appreciate a good joke thank you sir
@benscoles5085
5 жыл бұрын
loved the ride in back, the music was perfect.
@mischef18
5 жыл бұрын
Got ta love that tape measure bro the instructions are a good idea too. All the best from Hobbiton NZ
@skipman8yard
5 жыл бұрын
Great vidj jef and that scenery is something else especially when your driving old kenney 👍😎🤟✊🇬🇧
@kellykonoske91
5 жыл бұрын
Dont you dare Jeff! Weve got more than our share of...Californians in Oregon, thank you very much! Todd the retired trucker.
@carlbriant5425
5 жыл бұрын
swicth blade turbo lock nut on clevis was loose threads on clevis or shaft don't last as long vibration
@j.b.maxwell8300
5 жыл бұрын
Jeff it looked like the lock nut on that turbo actuator arm was loose on the pivot, but it may not it just looked like it worth checking (scraper no 1 )
@jacobkemp1183
5 жыл бұрын
Unless you do what we do in New Zealand, and crank up the injector, to make it pump out 750 HP, thens a D8 with the power of a D9T
@boganphelps7809
5 жыл бұрын
Hey jeff. Couldnt help but notice the jam nut on the turbo cylinder is loose in youe video..
@warrenjones744
5 жыл бұрын
Wow I have not seen a Sinclair gas station in 40 years! They disappeared here in the Northeast US years ago. Tillman 750 gloves are my favorites! Lifting lugs are way cool!
@patwilson1056
5 жыл бұрын
Just rented one for a month pushing clay material great cat like your channel, appreciate the technical information. We have all cat equipment for our pit. Expensive but great yellow paint.
@jackbaker5284
5 жыл бұрын
Jam nut loose Jeff, Heads up!....Jack
@amsimons29
5 жыл бұрын
A couple of our Hermann brothers trucks run out that way Hauling lumber and equipment thru black foot and twin falls
@badriv455
5 жыл бұрын
Speaking of A-model...whats the status on old Kenny? We havent heard anything since you tore it down.
@montygomez495
5 жыл бұрын
Check that nut holding that piston by the turbo that D8 seen like it was loose..@ 3.47 on video
@waults
5 жыл бұрын
Put some BKT tires on our old 79J yard loader 3 yrs ago, they are looking pretty sun-checked already. Seemed like a good deal at the time, but I'm not very optimistic on their long term life expectancy now.
@josephpegram1
5 жыл бұрын
Good lord measure twice and cut once went out the window when these got passed around the job sight. Spend the whole day measuring.
@Jpaydirt
5 жыл бұрын
Job sight................... get it lol not site lol
@josephpegram1
5 жыл бұрын
@@Jpaydirt I didn't mean it that way but it fits. Lol thanks for showing my error. I'm 37 and try to learn something new every day.
@2020jd
5 жыл бұрын
Jeff what’s going on with the 1698 for Old Kenny? Haven’t heard your talk about it in a while
@jackbaker5284
5 жыл бұрын
I used to haul radio active waste into the Hanferd,WA site thru your area for T.S.M.T.Those Nuclear Engine pics are cool, I was aware they made them but no idea what they looked like.Thanks.....Jack
@swn02
5 жыл бұрын
Another top notch video Jeff, some good funny bits for a laugh, your chipmunk voice made the dog bark
@Gavin84w
5 жыл бұрын
First time i have ever heard someone state the correct oil change for a D300 family engine, 346 the same too at 125hr
@gpf1972
5 жыл бұрын
The elevator music while you were getting dinner made me piss myself lol
@gordonmcmillan883
5 жыл бұрын
Thanks Jeff, you finally sorted me out. Nice deal on those tyres if they hold up.
@Digginok
5 жыл бұрын
Pretty cool country up there, love the mountains!
@williamfisher9803
5 жыл бұрын
Buy it Jeff. It ain’t nothin but money
@richardhalley6895
5 жыл бұрын
Love your antics an love the measuring tapes 👍
@soldierofdirt81
5 жыл бұрын
Rockport TX... My hometown and where I spent my childhood until I left for the Seabees.
@mepoweme
5 жыл бұрын
MCB 11 1961 1963
@cwdtransport2247
4 жыл бұрын
NMCB-4, 40, PHIBCB-2, HCU-2, BeachGru-2, CBU-410 & 412, LSD-32 Speagle Grove, NATO Base Keflavik, NAVSTA Adak, NAS Rota, Diago Garcia BIOT, CBC Port Hueneme/Davisville/Gulfport, NCTC Hueneme/Gulfport, NavBase Yokosuka/NavMag Taura Cove, Navweaponssta Yorktown, Navairsta Cecil Field. ChiefD
@kevincasady8992
3 жыл бұрын
I delivered to that aircraft hanger with no runway once...never so happy to get out of there. That was my directions too, go west of Mud Lake til you see a huge hanger with no runway.
@scottmarshall6766
5 жыл бұрын
Enjoy your D8T - run it like a rented mule, but go easy on the tyres (in Indian/UK parlance). Good video. Glad to see nothing broken this week, just 9 grand in new rubber (ouch) PS - the rod nut (jamnut) on your switchblade turbo is loose - you can see it moving in the video - better see to it before the rod end walks out of adjustment (or off).
@dcw1540
5 жыл бұрын
I think that guy on the mower lost it Jeff.i think you need to watch. Thanks
@Gavin84w
5 жыл бұрын
Those Cat link brackets are some of the best lifting links you will ever work with
@fredscott9090
Ай бұрын
Bkt's on 1 580 sl hoe 2 tratter pulled 13 yard reynolds scrapers and a 1200 bushel grain cart. No complaints. So far.
@billcarp3523
5 жыл бұрын
Cool tape measures. Ooh-la-la!!
@Boodlemania
5 жыл бұрын
Hey those aircraft engines were developed by the good folks over here at ORNL.
@Gavin84w
5 жыл бұрын
Dont grind it Jeff, there should be another toungue available for that bead breaker. On some bead seat bands that lip that the toungue bites on had 1 or 2 raised if you like sections that stuck out further so you could fit the style bead breaker you have in and start pulling the bead back, by the time you have it pulled some and some nuts wedged in to hold it you could fit the breaker with the fatter tongue in every where and you just keep going till it breaks free.
@donl9133
5 жыл бұрын
Crazy small world..I just happened upon your channel..I went k through grade 3 in Carey still have a pseudo uncle that lives there and my dad lives in twin falls area and is a foreman at Idaho sand and gravel..keep up the good work
@normandyck7609
5 жыл бұрын
You forgot to offer us a coffee when you stop for your coffee
@denniswilliams8747
5 жыл бұрын
I bet you can improve the oil filtration on your engines. Centrifugal filters can take out the soot. Thanks
@B81Mack
5 жыл бұрын
Mack started using a centrifugal filter well over 30 years ago on the E6 and later the E7... did exactly that, removed a ton of soot.
@sydneyshinshi
5 жыл бұрын
Hard to believe they put 7 1/2 mph speed limit sign up. If it was a Volvo dealership or something Euro you might think they have a world wide standard and it is a conversion from Kph but it is a cat dealer in America. Strange indeed. Oh and i just realised my name is on the whiteboard so extra special edition.
@Buzzbox3rd
5 жыл бұрын
Bloody fun video to watch, love the close up look at the country there. Well done mate.
@kevinmatthiesen8961
5 жыл бұрын
Hey Jeff, was wondering if you have watched a channel called strange Hawaii. They're bulldozing a 4 mile stretch of hwy 132 that was covered in lava
@kevinmatthiesen8961
5 жыл бұрын
with what Jeff said in a previous episode that lava rock just tears up a machine I'm wondering how long the cutting edges are lasting and oh my God the dust is got2b just killing those engines
@Jpaydirt
5 жыл бұрын
I have seen that, the lava in Hawaii seems to be quit soft, you would never be able to do that here,
@halfassedmodding
5 жыл бұрын
Really glad I found your channel! I just love that KW. if your ever in Roseburg with it, drop a line I'd love to see it!
@woodwelder
2 жыл бұрын
You can’t go wrong with BKT’s we used them in WA Australia for all our equipment 👌
@grandpajim329
5 жыл бұрын
😎😉😊😊 AWESOME PEAK INTO YOUR WORLD AGAIN !!!👍🤙 That country out there is really "out of this world" in places. Them "Craters of the MOON" and all that lava,,,, CRAZY STUFF !!! I remember traveling through there in the 50's and dad talking about all that strange goings-on in (ARCO) country.... I never heard about those engines AND A WHOLE LOT OF OTHER "SECRET STUFF" you are telling about.We lived in Klamath Falls Oregon then, dad was a trucker out there after the war. AGAIN "AWESOME VIDEO" GOD BLESS .🥃🥃 😍😍😍😍😍
@ericlawhorn2280
5 жыл бұрын
Grandpa Jim
@bcbloc02
5 жыл бұрын
As the finance man you don't get to run the equipment. :-) My experience with India tires was they dry rot cracked something terrible and were junk in less than 10 years. Hopefully you will use those scrapers enough they are worn out before that time elapses!
@Digginok
5 жыл бұрын
Ya didn’t cover the exhaust on the 8! 😂 hope it don’t void the warranty!
@paulpence8895
5 жыл бұрын
Thanks for not sending them to Colorado!!! LOL
@onceuponatime9314
5 жыл бұрын
it might be an idea to cut a slot to fit a tyre iron through at an angle behind that hook, just an idea from u.k great vids good fun
@mattwesley4435
4 жыл бұрын
What do you do ?..excavating?..do you own your own company and all the equipment you show?
@youpattube1
4 жыл бұрын
New subscriber from brian bloc. Do any of your videos show you getting one of those big bulldozers up on the trailer and chaining it down ?
@robertwhitehead5946
5 жыл бұрын
Love your stuff, love seeing your state.
@MCEngineeringInc
5 жыл бұрын
You should mount a broom on your mower so at least your cleaning up while your horsing around 🤣
@Jpaydirt
5 жыл бұрын
Excellent idea
@shanemarzoff827
5 жыл бұрын
How do you take off so fast from those Red traffic lights 🚦 just sitting in Barstow Cali getting my shine on be running up I-15 no back roads this trip 🤣🤣🤣🤣
@CRice-ln8lm
5 жыл бұрын
Why is the locknut on the switchblade cylinder spinning or moving? It should not do that!
@MyOLD36chevy
5 жыл бұрын
9 other people made the same comment.
@Jpaydirt
5 жыл бұрын
I like my nuts nice and loose
@cjeeper86
5 жыл бұрын
D8 made in Peoria IL just 20 miles from Morton parts warehouse I see them on train cars going out of town all the time
@MrStacygordon
5 жыл бұрын
Your Switchblade locknut is lose,that might give you some trouble.
@davesalmond6726
5 жыл бұрын
Effort better spent on nuclear propelled spud harvesters in Idaho-catch that on red-green.
@ernestdougherty3162
5 жыл бұрын
Great video funny and awesome
@farmallskittle
5 жыл бұрын
Shane's about to get pulled over now that you have away his hiding spot lol
@jacobkemp1183
5 жыл бұрын
D8N pumps 410 American HP, D8T pumps out 310 Japanese HP
@Bowiiihowdy
3 жыл бұрын
Your thinking of an 8L. The 8Ns run about the same hp
@stevenmontoya3273
5 жыл бұрын
Been watching for a few years. The question is where is old Kenny. What happened kenny
@fowletm1992
5 жыл бұрын
We run loads of bkt tyres on the farm They make the odd size flotation tyres to replace trellenborg Better quality than trellenborg as well Use them on our scraper as well
@markbulva4188
6 ай бұрын
And for anyone from California we are full!!!! 😂 I think every state and province in North America is saying that!!!
@kenuber4766
5 жыл бұрын
4:00 jam nut loose on the switch turbo shaft. HaHaHa.
@phillipbonner5215
5 жыл бұрын
Cool tape measures.
@tater_relocater
5 жыл бұрын
Geeee you didn’t cover the exhaust stack 😂🤣😆. Ps Good Friday nite watch sir . Have fun measuring.
@robertwarren4706
5 жыл бұрын
That lock nut on that Turbo is loose
@hvy1ton
5 жыл бұрын
Ron's Tire Factory is awesome. I was wondering if we'd every get any video of Terreton/Mud Lake with you working at the INL.
@joecrowder2248
5 жыл бұрын
I was watching Cunningham out in OKLAHOMA work on his AC condenser and realized he could use one of them there fancy tape measures you got
Пікірлер: 325