such diligent work. glad you did that seiko justice. the hands are horrible! great video, subscribed!
@WeekendWatchRepair
9 күн бұрын
Thank you very much.
@rossjackson3670
Жыл бұрын
An excellent transformation with an excellent commentary. The video from the camera's look good. No need to spend to get good results. You're there.
@WeekendWatchRepair
Жыл бұрын
Thanks Ross. I sometimes forget that when I am editing I am looking at the footage in a lower resolution (so my computer can handle the load), and then I render it back out into high definition as it was when it was originally recorded. The footage I was looking at while doing the narration was very poor on that camera compared to how it rendered afterwards. I can see small differences in the final video, but it isn't as bad as it looked in a lower definition while editing. I think that a lot of the exposure changes I made to the camera 1 footage made it look better though. I'm still going to do a bit of testing before the next watch is done, but I'm glad that it wasn't as bad in the end as I thought it was going to be. Thanks as always for your support. It's always great to hear from you.
@jerrywilderman1569
9 ай бұрын
Outstanding job transferring that watch back to quality form.
@WeekendWatchRepair
9 ай бұрын
Thank you very much. I think it turned out really well.
@simonmellor781
Жыл бұрын
Another great video. Thanks!!
@WeekendWatchRepair
Жыл бұрын
I really appreciate it. Thanks for watching!
@b08m4rt1n
6 ай бұрын
great look, that bump at 51 minutes on the chapter ring hit me right in the OCD though.
@Looey
6 ай бұрын
Your videos and commentary are EXCELLENT. I would rather watch these than lots of TV shows. Entertaining and inciteful - I feel If I could take a watch apart w/o damage, given the right tools. Cleaning, reassembly, lube, and knowing what is worn and needs replacing/reworking is genius.
@WeekendWatchRepair
6 ай бұрын
Thank you very much.
@WristwatchMedic1953
Жыл бұрын
It's a great video. I thought the camera looked good. Good looking watch cleaner machine. Watch came out great. Thanks for the video
@WeekendWatchRepair
Жыл бұрын
Thanks a bunch. I am my own worst critic I suppose, but after staring at this footage for hours on end during editing I can see differences. OCD can be a curse sometimes! I'm glad you enjoyed the video, and yes, it's a great watch cleaning machine. I'm so glad to have it back. The heater quit working on it and I had to send it across the US to get it serviced. I asked them if they could just send me the part and I'd repair it myself, but they couldn't do that. It took a few weeks before the part could ship out of Germany, and another week or two to get through US customs before they finally got it. Once the part was received they got the repair done quickly and got it shipped back to me. It's back home where it belongs now! Reply
@jsollowsphotography
2 ай бұрын
What a wonderful transformation!!
@WeekendWatchRepair
2 ай бұрын
Thanks.
@scottmayfield9314
8 ай бұрын
I have been watching some of the other guys and ran across your vids. Really enjoying them! Nit many of the others I have seen have been doing the Seiko movements. When you are finished with these watches, do you sell them as well??
@WeekendWatchRepair
8 ай бұрын
Thank you Scott. I'm glad you are enjoying the videos. Regarding the Seiko's, I'd say 80% of the watches on the channel are my own. The rest come from locally from friends, etc. I'm a vintage Seiko enthusiast, thus the volume of Seikos on the channel, lol. Regarding selling watches from the channel, I've sold some of them (mainly locally), but really only do so to fund other projects for the channel. It's sort of a revolving door at this point, one goes out and another comes in! Some people have suggested putting them on eBay. My intent was never to use this channel as a way to promote the selling of any watches. That being said I have sold a couple of watches on eBay (before this channel started). I do not have a long history of seller feedback, and eBay held the funds of those watches for nearly 3 weeks before releasing them. For me at least, it was just too much hassle after the seller fees and delays than it was worth. That's why I've just post them locally when I decide to sell one. Maybe that will change in the future, but for now it's just been the route with the least amount of hassle,
@petrvyhnalek3890
3 ай бұрын
Very nice job. I had the same watch, the hole for barrel arbor in the bridge got worn and the watch didnt wind up even after cleaned.
@NaNByZero
25 күн бұрын
I prefer the after version but I really like the hands on the frankenwatch. 🕐⚙️🍸
@WeekendWatchRepair
14 күн бұрын
They were bright and easy to see, no doubt about that.
@flyrr200
8 ай бұрын
Just subscribed. I love the 7002 diver. I found three at a church sale. Two had rusted out movements, and the third was still running well. I just wish the 7002 had a 3.8 case, then a NH movement would work as a replacement. I learned a lot just watching your rebuild. Thanks.
@WeekendWatchRepair
8 ай бұрын
Thanks so much.
@toddyrocks
6 ай бұрын
I've used a ball from a medium Bic ball point pen and a cut down strap spring for the click ball in a 7002 divers. works perfectly
@WeekendWatchRepair
6 ай бұрын
Yes, those are the same size and work great as well. One thing to be aware of when doing that is most ball point pens have a tungsten carbide ball. If used for the bezel click ball, it is much harder than the steel bezel and can induce much more wear over time compared to a regular steel ball bearing. That being said, I've done the same because I didn't want to wait on an order of ball bearings to be delivered! It worked great. I did eventually swap it out because the bezel on the other watch (not the one in the video) was original and I didn't want to wear it out (although I hardly ever actually use the rotating bezel for anything!).
@djinconroe
11 ай бұрын
I've put together watches like that before. Maybe not that bad but a collection of parts that I thought would work together and then.... something just doesn't work. They're fun and when I eventually work out what I want on it I'm usually happy with the result. Those hands though. Oh lord.
@WeekendWatchRepair
11 ай бұрын
Yeah. Those hands were awful! Haha.
@freeweaponsgermany5578
11 ай бұрын
great video - and an absolute stunning transformation of this watch!!
@WeekendWatchRepair
11 ай бұрын
Thanks a bunch. I am really pleased with how it turned out.
@imsergio
7 ай бұрын
Excellent video! there's a lot of these being sold from the Philippines. I wonder how legit they are. Dials, hands and bezel inserts are almost always "aftermarket".
@ksarm1299
8 ай бұрын
Not a frankenwatch! This was a precisely modded watch from a very demanding and really well informed professional, probably diver (or less likely an aircraft pilot)! You transformed a pro tool-watch to an everyday ladies watch (sorry if that seems harsh but it's the reality). It is very well known to professional divers that the black dial combined with white hands is the easiest to focus instantly when in difficult conditions, whether it is poor lighting or biological reasons (fatigue or poor eyesight). This is "old" knowledge, and this is why the Radiomir Panerai watch for the Italian army in WWII had exactly this setup. As for the yellow smooth clickless bezel, it would indicate probably the diver's decision for timing the remaining gas and should be clickless in order to do it wearing gloves while underwater. That's why I incline to the diver rather to the pilot. This watch was timing the remaining gas, and someone decided to use a Seiko to bet his life on. As for the quality of your restoration (excluding the equivocal transformation): superb as always, carry on!
@WeekendWatchRepair
8 ай бұрын
You may be right, but it was still ugly, haha! I'm not sure a diver would've used a leather strap though, and the bezel wasn't click-less, it was just broken. Whatever the case may have been, I'm pretty pleased with how it turned out. I appreciate your detailed comment.
@ryno101
5 ай бұрын
Fantastic work. Love the finished product.
@WeekendWatchRepair
4 ай бұрын
Thank you very much.
@jeroenvandervelden8213
10 ай бұрын
Good job, nice video! Really good to give these iconic watches another extra life cycle. I like the modifications on these seiko's, love to see another one.
@WeekendWatchRepair
10 ай бұрын
Glad you like them! I have another diver on the to-do list.
@michaellawrence6677
8 ай бұрын
I think you did a great job.
@WeekendWatchRepair
8 ай бұрын
Thank you very much.
@markstevens8142
Жыл бұрын
Nice outcome Adam 👍👍👍
@WeekendWatchRepair
Жыл бұрын
Thank you Mark.
@johndjurstedt
10 ай бұрын
nicely changed 🤩, I would have chosen a seconds hand with a small arrow at the end though, as these with round ends fit better on dials that have round markings...but that's me☺️
@WeekendWatchRepair
10 ай бұрын
I hadn't considered that, but it is a fair point.
@johndjurstedt
10 ай бұрын
Definitely don't take it as a criticism, it was just a spontaneous thought on my part, following your incredible knowledge of movement work and fixing with watches 🥂
@WeekendWatchRepair
10 ай бұрын
@@johndjurstedtNot at all. Now that you brought it up, it is something that I'll consider moving forward. I appreciate you leaving the comment. It gives me something to think about on future projects.
@peterwarner9572
Жыл бұрын
New subscriber - great video, nothing wrong with the picture quality at all. This was great Sunday morning viewing 👍
@WeekendWatchRepair
Жыл бұрын
Thanks so much.
@Looey
6 ай бұрын
Re: That C-clip --- I would've done that too (move it to the edge so I could grab it) lol
@WeekendWatchRepair
6 ай бұрын
Yep!
@jools182
Жыл бұрын
great job, looks lovely now!
@WeekendWatchRepair
Жыл бұрын
Thanks!
@BCM1959
6 ай бұрын
Nice job. 👍
@WeekendWatchRepair
6 ай бұрын
Thank you.
@DarthSpaceBall
7 ай бұрын
It’s amazing that the Elma needed repair. I’ve been looking into one and it seems a ton of YT videos I come across, there is some kind of issue with them whether it be breakage during shipping, a manufacturing issue, or just a function issue. The cost is boggling for the errors. I’ve just decided I’ll try my luck with a vintage L&R due to what I’ve heard.
@jeffreyhickman3871
5 ай бұрын
I don't think 🤔 that's a Frankenwatch. It looks 👌 like a normal Seiko. To me, it isn't ugly. I REALLY like your one hour plus ➕️ videos 📹. Also, don't worry about the small 😉 amount of radium on the watch dial, or the hands. I don't find it 😕 to cause cancer or radiation. At least, it isn't significant. Your friend, Jeff.
@ForestWoodworks
7 ай бұрын
Can IPA be used as a substitute for One Dip? I'm sure I'm get OD soon, but in the meantime I'm just trying to use what I have. I'm so thrilled I got past that first service hurdle! Now I'm looking at the watches I bought for practice and I say "I'll be back, stick around. You're next." as opposed to "I'm too scared I'll screw up." Thanks Adam!
@WeekendWatchRepair
7 ай бұрын
Not entirely. IPA can dissolve shellac, which is what your pallet stones and impulse jewel are attached with. One-Dip is trichloroethylene (with a few additional additives) and will not damage shellac. It is an excellent cleaner. A quick wash in IPA probably don't do much to the shellac, but over time it will dissolve it. One-Dip, Bergeon B-Dip, or other solutions will work well.
@HuiChyr
8 ай бұрын
I watched other channels and noticed they used wood/plastic tip tweezers when working on the hands to prevent accidently scratching the dial.
@barryanderson3598
2 ай бұрын
Love your English terminology 😂
@WeekendWatchRepair
2 ай бұрын
Thanks
@kyledriscollmusic
5 ай бұрын
personally I much preferred the look before hand. To each his own I suppose
@WyvernDotRed
7 ай бұрын
48:34 If my experience with modern trackball mice is anything to go by, it's better to lubricate the moving piece. This as when only lubricating a contact point, it will quickly get rubbed clean. Perhaps the difference of a single axis of movement over the two of the ball makes the difference of it working, perhaps not. While this is a weird comparison, with trackballs you are very well-aware of it's state of lubrication while using the device.
@propetamckissack524
Жыл бұрын
Handsomely watch 👍
@PowerChucker
7 ай бұрын
Damn, that 7002 is rough! Ive owne a bunch of modded 7002's, and some were nice, and some not so much lol. Also, im Adam too. .
@look4truth480
10 ай бұрын
Well after coming across miniature novelties, Drum Clock-Watches and Nuremberg eggs, then an hour glass I'm wondering if it's the mechanisms or the Idea of time. I am a strange one and stuck in a world of what is good and what is bad and what will exist in the future. Time is just and idea to me, past events can be labeled as 'seemed like just yesterday' the day can go by quickly or slowly, and the future is unknown. So I'm not a big believer of time. A watch hour dial hand is just a little Sun circling around the north pole in my eyes. Like I said a strange one. Maybe collecting any time pieces is for me. I honestly think 'time' is not going to be as important in the future. But keeping the knowledge of it will be. Also I would have loved to be a red uniform on Star Trek, I would have stole the show dying to the monster of the episode!
@John_Mack
7 ай бұрын
Nice transformation, from an ugly duck to a swan...
@WeekendWatchRepair
7 ай бұрын
Thanks a bunch. I think it turned out well.
@e.scottdaugherty8291
7 ай бұрын
Yeah, those hands..........are a LOTTA big.
@guidotheuns7988
4 ай бұрын
I am currently restoring a 7002 as well. Can i ask you witch oil you use four the different moving parts? Thanks a lot!
@WeekendWatchRepair
4 ай бұрын
On this watch I used 9010 for balance, and 3rd through escape wheels. HP1300 for center wheel, barrel arbor, and motion works, 9501 for keyless works, 8200 for mainspring, 8217 (or could use Seiko S4) for breaking grease on barrel wall, 941/9415 for escapement.
@alancampbell1008
4 ай бұрын
Are you sure that it was a genuine Seiko and not an Aliexpress/Ebay special? That could account for no branding on the movement and the mainspring if it was a cheap copy. I make quite a few 'Seiko' watches that way 😂
@DPW55
4 ай бұрын
Inneract It’s pronounced interact , ,,,please pronounce the Ts 😆bless you ADAM
@jorgemarcano8573
4 ай бұрын
para los que en realidad no son relojeros profesionales, esto les parecera fastuoso pero la realidad no lo es...,
@reesebroekhoven3962
3 ай бұрын
I have one of these that stopped running and need new hand set how much you charge for repairing one of these?
@WeekendWatchRepair
3 ай бұрын
I am unable to accept commissions at this time. Thank you though.
@reesebroekhoven3962
3 ай бұрын
@@WeekendWatchRepair thanks for replying and letting me know. Also love your channel keep up the content
@WeekendWatchRepair
3 ай бұрын
Thanks a bunch.
@outwoodyapecker
Жыл бұрын
i think you didn't align the movement holder following the stem cutout. 57:33 the stem cutout is near 6 o'clock here
@WeekendWatchRepair
Жыл бұрын
You are correct. I caught that later and corrected it. Excellent eye!
@RandomRestore
7 ай бұрын
🙂👌
@jlovelace486
2 ай бұрын
Just like you are not a professional watch maker, you are not a professional photographer. The first rule of media is don't tell people what is wrong. Most people won't know unless they are professionals.
@WeekendWatchRepair
2 ай бұрын
Fair point.
@valengreymoon5623
Жыл бұрын
Wow, someone really ruined that.
@WeekendWatchRepair
Жыл бұрын
Yeah, I have nothing against people who mod watches, but I can’t say that I agree with their choices on this one. The beauty of it is at least it can be turned into something else. There’s no shortage of parts or options on these old divers.
@valengreymoon5623
Жыл бұрын
@@WeekendWatchRepair I have one of these from 1994, and aside from some dial fading, and a replacement OEM strap, it's as it left the factory.
@WeekendWatchRepair
Жыл бұрын
@@valengreymoon5623 They are great watches indeed.
@RyeOnHam
Жыл бұрын
Straight out of India. They pack a bunch of marginal parts into a 'watch' and then try to charge market prices.
@WeekendWatchRepair
Жыл бұрын
It's possible, but I'm not sure this watch came from there. I bought it at a local watch meet, from a guy who is a regular trader. I suppose there is no telling where it came from originally though. Someone clearly liked the watch and wore it quite a lot (as evident by the wear & damage to the case and bezel). I knew it could be mechanically sorted, so I figured I'd give it a shot. Believe me I didn't pay much for this watch when I got it! If I came across it online I probably wouldn't have ever considered buying it. BTW, really cool video on the WW1 Colt. I enjoyed watching that one. Jujubes was great!
@jorgemarcano8573
4 ай бұрын
saludos! si le soy sincero, su forma de ensamblar y aceitar los movimientos no me gusta y tampoco es correcto....
Пікірлер: 92