Thanks for explaining this. I'm glad other people ask the questions I'm too lazy to ask myself.
@pauls.5815
Жыл бұрын
Airsoft mosfets don't reverse polarity for Active Braking. The circuit would be much too complicated. That is called plugging, and airsoft mosfets don't use it. Airsoft uses dynamic braking. It basically shorts positive and negative together after each shot. If you take a brushed motor and run a piece of wire between + and - it will be harder to turn. Power tools use the same method in brushed motor tools. Not sure why it damages ESCs in brushless motors though.
@GainsGoblin
Жыл бұрын
great insight thank you
@johnh3733
Жыл бұрын
Thx mate
@AdamHoy81
Жыл бұрын
Top vid mate, keep up the great work 👍
@Danny-G
Жыл бұрын
i'm calling them gun computers from now on
@Robbie1a2b
Жыл бұрын
I have been trying to find information on this for the last few days but I’m still a little confused can I still play with the rate of fire in the Jefftron app
@earlbogart6681
Жыл бұрын
Does the T238 motor work in a M4a1 Anstoy GEL blasters?
@opentraitor8145
Жыл бұрын
Hey man I recently bought a e017 from Tactoys and it worked for the first couple hours and now it just sounds like a drill and I’m really upset coz i think it might be broken can you please help me out
@pulloutpadawan420
8 ай бұрын
is precocking w brushless motor fine too?
@bombassbeefjerky9708
Жыл бұрын
Esc or speed control is what the part is called that’s on the motor.
@lolepicfailhaha
Жыл бұрын
So with v2.0 t238 i cant use active breaking? And if not how to prevent overspin?
@pezzkill8165
Жыл бұрын
to prevent overspin, use a stronger spring. If your fps becomes too high, short stroke your sector gear
@stelthtenau
Жыл бұрын
Recently got a bigrrr mosfet for my custom and was going to get a warhead 35k for it but i dont think i will do that now. Not unless i can disable active break on the bigrrr. Have you done anything with ldt mosfet before? Also heard the tapetless head is drama
@Apollo_Q
Жыл бұрын
bigrrr uses small magnet inside the sector gear, so you can remove it to prevent active breaking
@stelthtenau
Жыл бұрын
@@Apollo_Q thats how the mosfet reads the gear position so no.
@j-airsoft
Жыл бұрын
Thank you for addressing the MOSFET/FCU/ETU terminology, somehow everyone has been taught that they're called MOSFETs, and it drives electrical engineers crazy 😂 Expanding on the "funny signals," Perun likes to put those easter egg songs played via beeping the motor at pretty frequencies in their FCUs, but I've been told that these easter eggs do harm to BRUSHLESS motors. As far as I understand it, the beeps are purely "on" bursts at certain frequencies to hit notes and no funny polarity business if I'm not mistaken. Is it actually bad?
@lowguidoschopshop
Жыл бұрын
for as long as I can remember I have wanted to know how the heck they play those songs on the motors.. it seems logical that a speaker and a motor are pretty similar, coils and magnets... but trust me I have tried to play music on a motor and It wasn't as simple as I thought. so I have no idea what signals they are sending down those wires to make those sounds, but I cannot imagine that those songs playing on the input voltage rail of your electronic speed control would be a great idea. would it damage the Motor ESC? I don't know? probably best to just not do it.
@lowguidoschopshop
Жыл бұрын
also re: calling them MOSFTS, I am pretty sure it comes from the early days of airsoft where people would literally "put a MOSFET" on their trigger switch so the contacts wouldn't arc. there are still some raw "MOSFETs" on the market, but most these days are small microcontrollers with all sorts of programing, and just happen to have a MOSFET or 2 on the output.
@j-airsoft
Жыл бұрын
@@lowguidoschopshop in theory if we stuck a diode on one of the leads, tried the Easter egg, and it didn't work, then we could probably safely reason that it does some funny polarity business right? In which case a solid yes it's bad could be proven... I'm gonna try that
@gelology5514
Жыл бұрын
The t238s have better ESCs than warhead but warhead has better hardware
@gelology5514
Жыл бұрын
Oh yeah and you can adjust fire rate on brushless cos it's basically like a pwm and it pulses power which is really bad for circuit boards so it needs to be 100%
@drewmurray6480
Жыл бұрын
Would this motor prefer t238 mosfets instead of a levi or something similar
@gelology5514
Жыл бұрын
@@drewmurray6480 probably t238 tbh
@drewmurray6480
Жыл бұрын
@@gelology5514 cheers bro i kinda thought that they would suit each other best lol lucky i got 4 t238 v1.7 for 200 bucks and still got one sitting in the box, i got basically everything for my scythe build with a base model 35k warhead motor and i do have one leviathan spare but was thinking about getting one of the new optical leviathans for it just a bit short atm after paying for car rego and insurance im basically tapped out atm but i won't be touching that particular build for my falkor blitz for a bit ,i still got a few other builds to sort out first 😂 my hpa build is still sitting under a towel on the work bench just had heaps going on recently and had family visiting from nz but now i have some more time on my hands i will get back into it
@sj_asc5950
Жыл бұрын
They’re same OEM, different ESC and winding. T238 has more potential power, but both are deeply flawed and have huge room for improvement. Still, for now, brushless in general is bringing many advantages which still make them worth buying.
@jonkroning6753
Жыл бұрын
Hi there, the Gate products eg: Aster or Tittan etu/fcu/mosfets now have firmware that supports brushless motors. I am an hobby business that imports gate products. If I have one spare on next order would love to send you one for review ,if your interested.(Beachmere Blasters)
Пікірлер: 30