suggestions welcome, we just want to make it as helpful as possible. We've kept the price extremely low as we tried to put all the annoyingly expensive add on items all into one package for the average everyday hot rodder. Were just two rednecks that both work during the day and have normal lives, so be patient with us. A few out in the wild, but more on that later. Were taking submissions for beta testers here: thecarbcheater.com/BetaTesterApplication.php OR, should we NOT move forward and just keep it amongst friends and family. A lot of work on our part, and with making it affordable for outside folks, its not like were making any money here - just our contribution to the automotive community.
@frankglasgow
Жыл бұрын
Want!!!
@GB-zi6qr
Жыл бұрын
Very nice Luke!!! You do you, but I have enjoyed your videos.
@johnparrish9215
Жыл бұрын
I wanted it when all it did was work with the air/fuel ratio, but NOW I really WANT it. Just don't sell the rights to Holley, we will never see it again.
@chrisseger6870
Жыл бұрын
Move forward! I'd beta test the sh!t outta this. For people who want a classic without the guesswork of putting gauges everywhere. This is awesome. Also, make sure you patent your stuff. This will get stolen out from under y'all otherwise. Wanna see you succeed.
This is incredible and could greatly influence the entire classic car world. Why retire from KZitem completely (I understand slowing down) when it’s literally became one of the most globally influential platforms, and free promotion.
@jimmac1185
Жыл бұрын
He's "retired" from KZitem several times now. He isn't going anywhere.
@ThunderHead289
Жыл бұрын
@@jimmac1185 my absence is getting longer and longer - someday. I'm tired 😅
@wobblysauce
Жыл бұрын
@@ThunderHead289 one day, but that day isn’t today.
@henkoosterhof5947
Жыл бұрын
@@ThunderHead289 i can understand it takes a lot time to post. But please dont stop. Youre info is to valuable to all of us. I am a retired marine engineer.
@Fractal_CZ
Жыл бұрын
When you are tired over and over again, you are re-tired :)
@landiahillfarm6590
Жыл бұрын
DONT RETIRE!!! Really looking forward to an indepth dig into this, as you say Fuel Injection is E-X-P-E-N-S-I-V-E and for many of us working class fellas completely out of reach
@Maples01
Жыл бұрын
Damn Fords early OBD1 injection is punishment to any mechanic
@cavemanken7029
Жыл бұрын
Please don't quietly retire from KZitem. You have a no BS way of putting out videos that are informative and timeless.
@paulweigle6872
Жыл бұрын
Pure genius. I love carbs, and this makes so much sense I'm surprised no one came up with this . You give me faith in the future of classic cars! Don't retire from KZitem, there is no rule that says you have to post every week.
@sethbarnes7608
Жыл бұрын
Absolutely right! I'd much rather see a well informed, we'll produced and put together video less frequently, than to watch some of the junk on KZitem these days
@shoveI
Жыл бұрын
In the 1980s Mitsubishi was putting Mikuni feedback carbs on their four cylinder engines. They were an actual carburetor with a low pressure fuel delivery (not TBI, no kind of "injector") but used an oxygen sensor and a variable air channel to adjust AFR continually. In retrospect they're really clever, but back then none of us had any idea how they worked and nobody would touch one. Today with what I know I'd have no problem.
@williamstamper442
Жыл бұрын
To monetize a video it's a rule you have to post more than once every two weeks so yeah, there is a rule. I'm not trying to be that guy I'm just sayin'..
@paulweigle6872
Жыл бұрын
You're not that guy, just informing us that didn't know. Thank you.
@pete2072
Жыл бұрын
@@shoveI GM did the same with quadrajets in the '80s, but they had narrow band afrs and the computer had a very narrow running area so they did not work well on non stock engines without a reprogram, which almost nobody offered or did, so they all got tossed for a regular qjet as soon as any mods were done. It's a good idea that was severely limited by the tech of the day, just like the first fuel injection systems. It's amazing to me nobody has really tried this since, it's a no brainer tbh.
@TubaWarriors
Жыл бұрын
This world needs more people like you Luke. This is awesome. Thank You.
@bryco32
Жыл бұрын
Quietly Retire!? Knock that noise off. I definitely would like to see something on the small garden tractors scattered around in that barn!
@Vagabundo74
Жыл бұрын
I'll buy one as soon as they become available. This is great, and I'm glad that you didn't retire from youtube!
@krissfemmpaws1029
Жыл бұрын
Your absence had been noticed, I had been wondering what you were up to and doing with the Carb Cheater. I understand life getting in the way of play things. Goid to see you back.
@DScaglione.
Жыл бұрын
The Future for keeping our old classic / muscle cars for generations to come! Great job Luke! God Bless 😎
@777smitty4
Жыл бұрын
Just helping the common man is the words of every hot rod legend believe it or not but you’re already a legend to many people
@badhabits77
Жыл бұрын
Your videos are very informative, your humor is dry and relateable. You are easy to watch and listen to. You make very interesting content. I'm sorry you feel pestered, quality content like yours is hard to come by as not only is it entertaining, it's passing good knowledge along! I'm using some of what you've shown us in the tuning of my car, a '67 Mustang with a carburated 5.0. If and when you decide to sell this setup, I will be on the list to buy one. No matter what you choose to do, I'm glad you are settling down in your new place and I hope you find fulfillment in your endeavors.
@jamescaldwell2095
Жыл бұрын
Something like this has been needed for years. And I'm honestly shocked it hasn't been done. I can't tell you how excited I was when you first made this system. I showed everyone I know.
@zuno555
Жыл бұрын
Progression Ignition + Carb Cheater sounds like a good combo. Complete control over timing and AFRs.
@Aaron-qg8fo
Жыл бұрын
YES! I was thinking the same thing! I have a one of those distributors on my 70 Buick LeSabre 455 and I love it so much! I'm looking to put one on a 91 Dakota as well. Then with a mower carb and this setup I will be set!
@chriswilson8911
Жыл бұрын
Boost timing and air/fuel adjustment for a blow thru carb would be sweet
@frankglasgow
Жыл бұрын
This
@jondahl3173
Жыл бұрын
@@frankglasgow Boom! With you on that. Another company has some device for carbs that auto tuned, but the price is exorbitant. Found it, K&N eci system $880 at jegs.and not power adder compatible.
@logand8023
Жыл бұрын
Single-handedly the most influential automotive product produced by an enthusiast. I am sincerely inspired and amazed that this is beginning to spin its tires. I'd give you a round of applause if I could!
@phillipgarrow2297
Жыл бұрын
Sitting on a gold mine
@basssq3
Жыл бұрын
I rushed to Google trying to figure out how to buy one, not realizing this is something you did yourself. I'm so glad I've followed you all these years, I've got my first carbed car and have been having a tough time. I'm buying this kit for sure!
@Paulman50
Жыл бұрын
The knowledge that I have learnt from you over the years is much appreciated, thanks.
@endermwatts
Жыл бұрын
This is incredibly cool! Besides the fact of what you are doing with it, it’s also an example of how these days people with the knowledge can create and come up with amazing products that the “big boys” don’t or won’t come up with. I would love to see you make this commercially available. I know you don’t have to be told but I’m going to echo others and say protect yourself and what you have come up with. Get your patents and such as soon as you can. You deserve to control what you have come up with.
@normd5776
Жыл бұрын
And what do "parents" have to do with anything?! 🤣
@endermwatts
Жыл бұрын
@@normd5776 whatever are you talking about…? ;oD lol
@normd5776
Жыл бұрын
slick 😄
@justinp910
Жыл бұрын
This is such a cool concept. I feel fortunate to have seen this grown from a video proving you can do what others think you can't (putting a lawn mower carb on a car) to becoming a fully fledged project that I seriously think could revolutionize the restomod world. I don't have a car with a 4-barrel holley or edelbrock, but my dad does, so I'm going to try to get him on board. As a tech guy and programmer himself, he will think this is very, very cool.
@JamieField-v3u
Жыл бұрын
I hope you bring this to market. I’m very interested in purchasing a few. I would apply for beta testing but I’m in Australia.
@Boats29
Жыл бұрын
Ya me too up in Canada
@mortenvanvik7082
Жыл бұрын
Same here in Norway!
@georgepoole3654
Жыл бұрын
You can add Scotland to the list 😁🏴
@schwuzi
Жыл бұрын
Austria waiting as well
@HazeyAuto
Жыл бұрын
Another Aussie here.
@travisolson2841
Жыл бұрын
Thanks for coming back to KZitem! I think you have a awesome product on your hands! Hope everything works out great!!!
@samcoolidge5988
Жыл бұрын
Been missing ya man!!
@XwarlokX
Жыл бұрын
Just signed up for the beta test. Been a long time since we have seen you man! I hope you keep coming back! You are here to us guys with these old carb'd rigs!
@kenleppek
Жыл бұрын
This is a winner. It sure beats the hell out of those feedback carbs from the 80s. You'll do well with this.
@tanguaygt
Жыл бұрын
OUT FRIGGING STANDING, MAN!!!! THIS is what I was talking about! You absolutely nailed it!! Total game changer. Please keep us in the loop if you bring it to market!
@andrewforster4974
Жыл бұрын
You are the greatest guy on KZitem and what you show people is so nice to help them through their lives hopefully you don't retire cause we can all learn from you
@StephenProcter-bt3su
6 күн бұрын
Hi, I am so glad that you were able to put your knowledge & skills to produce something that all of us want! I know I do!
@danielstrachan8988
Жыл бұрын
Luke, for what it’s worth I really enjoy your videos no matter when they come out😁😁👍👍
@albertscarani9843
Жыл бұрын
Great video Luke, I'm always wanting to learn more. don't retire we all love your videos a lot
@frankglasgow
Жыл бұрын
Keep making videos. I've learned so much from them. Glad to see you back making videos.
@fivestander
6 ай бұрын
This is awesome! I love the build/tuning series on the maverick and the science angle you bring, Luke. When that car started from your phone all I could think was “Christine 2.0”
@armchairrambo269
Жыл бұрын
Luke I wish you could make videos more often I miss the old days where you made a lot of videos man hope you can get back to them days you and Kevin
@numismaticstacker
Жыл бұрын
I love this channel and great intro! Love that jam! You show things in the mechanics world in a different perspective!
@jamesbarr3455
Жыл бұрын
Glad you're still with us. My best to you and your family. Do what's best for you.
@rumbleman
Жыл бұрын
This is brilliant. I love carburetors but they are such a pain in the ass to tune, and it just makes modern reliable fuel injection more and more attractive. this might be the answer for people like me.
@OscarOliu
Жыл бұрын
See, this is what engineering degrees are for lol, you're freaking awesome dude!
@kevinwalker3157
Жыл бұрын
Brilliant Luke! Love your knowledge and willingness to share.
@YurtFerguson
Жыл бұрын
Heck yeah man, carbs may be past technology but it just goes to show there's nothing that can't still be improved upon
@trevorpomroy550
Жыл бұрын
My favourite automotive youtuber. I learn more here than anywhere else.
@AiOinc1
Жыл бұрын
We used to call this a computer controlled carb or feedback carb. My Plymouth Reliant and Mazda B2000 shipped with a 2 barrel feedback carb from the factory in 1982 and 1986, respectively.
@ThunderHead289
Жыл бұрын
was a really good idea honestly but the tech just wasnt even close to there back then
@AiOinc1
Жыл бұрын
@@ThunderHead289 Actually, they work just fine. Even after sitting up 29 years the one on my Reliant is still working flawlessly, other than a ruined accel pump I had to replace. The problem was the people, not the parts. Dad under the shady tree hated computers and so it got ripped off and swapped for a Weber the first sign of any trouble.
@joeyallcock1011
Жыл бұрын
Fuck me you must of had a heck n a half springy long cable to connect your telephone set hooked up to your car also good job everyone never had that back then or wud of been getting our wires crossed somewhere!! "JoeDog"a.k.a J.C.A (the British are Coming, the British are Coming!) "I Say Great Stuff Old Chap, Well Done Sir"
@neubert500
Жыл бұрын
Your retirement from KZitem will be met with much morning here in my house! I honestly love watch your videos. You are amazing in what you do. Thank you!
@timothydove1694
Жыл бұрын
Can't wait I will order one we need more people like you some car parts are so damm expensive especially for full time dad's I'm always looking for ways to get things done on a budget thanks
@MichaelMcFearin
Жыл бұрын
You can’t leave KZitem, we need your level of video. I would love to see you expand more even, I have multiple carb vehicles and it’s really hard to find detailed info on tuning my older single barrel cars. The idea of this product is great as well wow! Make if for single barrel BB carbs please.
@lowest.tier.garage
Жыл бұрын
This is incredible! Nice work sir. Looking forward to more updates.
@opossozoku8005
Жыл бұрын
I'm so excited!!!!!!! Can't wait to own this on my C10!!! You really are changing the car world! It's impressive and I'm so proud!!!!
@8.2deck
Жыл бұрын
You and 5.0tussin are definitely my favorite KZitem channels. You could probably make a living off of KZitem and this carb cheater if you wanted to. I don't think any of your followers would complain about ads and stuff we'd just be happy to see more of you on here.
@xr6fix
Жыл бұрын
Hi from Australia! Definitely looking forward to purchasing when available.
@1XSTEALTHTWINTURBOX1
Жыл бұрын
I'd love to see a series' of eco mile driving with carb on different cars. See what kind of mpg & performance you get. Maybe even an Eco Vette or small engine Prius weigh level.
@rowdy3837
Жыл бұрын
Pre-order availability? This is an incredible advancement. Take my $$$!!!
@firepinto
Жыл бұрын
I'm so excited for this product! I'm Nate the data log guy lol. Remote start is something i never thought of, sure is tricky with a standard trans. Really no good way to detect neutral.
@ThunderHead289
Жыл бұрын
hello hello! I just used the universal relay we put on the board and pressed the "test" button which turns it on when pressed and off when released. it has a maintain on that would come on with a power cycle (could be used for electric choke), and it also has an RPM threshold trigger. want a shift light? nitrous rpm interlock? (window switch). really I left it up to the user to be creative with it. - basically a programmable dry contact.
@davelewandoski4292
Жыл бұрын
Really hate to see you quit you tube. Really enjoy your videos, and learn a lot. Looks like you have a great shop space now,!
@tcanthony2
Жыл бұрын
I know you want to retire but none of us want you to. Do what you gotta do for yourself. Wish you the best.
@makaylaslater5247
Жыл бұрын
This is pretty amazing. Your really smart to come up with this. You have some great features on it too.
@Shadetreehack57
Жыл бұрын
That rev limiter would be perfect for Drag racing
@nvwlsnvwls2785
Жыл бұрын
Glad your back online with new content :)
@t4k3chfre
Жыл бұрын
It's actually because of you that I bought a progression ignition distributor since you mentioned em a couple years ago. This is my third summer driving with it and it works flawlessly. Now seeing you getting closer to a finished product yourself makes me wonder if I'm about to invest in your stuff too! 😁 Is your carb cheater also altering the pre ignition other than just rev limiting? Or would your carb cheater and the progression ignition distributor be a perfect match? Keep those videos coming, I don't care how often or rather how rarely you post em, they're always worth the wait. 👌
@Papabearsmoto
Жыл бұрын
Cool product, glad to see you back on the tube... You're always good for taking things to the next level. Bravo 👏🏻👏🏻
@sethbarnes7608
Жыл бұрын
Your videos have been some if the most correct and accurate videos out there where it comes to automotive tuning. I actually wish you'd post more videos. There's so much inaccurate information out there on KZitem that we need more guys like you that actually know what you're doing. I guess we're just gonna have to make due with your buddy Junkyard Digs
@ThunderHead289
Жыл бұрын
Thanks for that btw. I've been disgruntled that honestly it seems like automotive knowedge has stepped back 10 years and I feel like all the effort I went through to teach was for not. Going to try one more time, wish me luck
@sethbarnes7608
Жыл бұрын
@@ThunderHead289 of course you know you have my support, and that of every one of your fans out here.
@sethbarnes7608
Жыл бұрын
@@ThunderHead289 just did your beta testing application. Id be totally excited to help with your development of your devise. It'd be awesome!
@sethbarnes7608
Жыл бұрын
@@ThunderHead289 and since I live right here in Des Moines, you'd have unlimited access to the car for whatever testing you need to do
@PaulThomas-qo9vy
Жыл бұрын
@@ThunderHead289 It is NOT for naught, Uncle Luke! You are preaching to the choir! We Are getting it! Yes, there is an automotive knowledge vacuum out there. But it's wise Guru's like you, teaching eager disciples like us that keep passing it along to new disciples of the old-school common sense! Be Encouraged! Keep Preaching & Teaching! You Are a Game Changer, a Difference Maker! I fist pump & stop everything to study each YT vid you post, for more gold nuggets of wisdom! Please don't quit! Thanks, Paul from S. Central TX..
@wadewhite2381
Жыл бұрын
This is the greatest invention ever.. 👍👍👍 going to keep my eye out for when you release it.
@walterdavis4808
Жыл бұрын
I have seen a car start and drive by itself in a movie , Christine .... I like yours better !
@Paulman50
Жыл бұрын
And "KIT" (knight Rider)
@ThunderHead289
Жыл бұрын
the mav is her missing tooth, married to her first cousin neighbor lol
@walterdavis4808
Жыл бұрын
@@Paulman50 true. But kit had that annoying, no it all voice . Still like the maverick better
@walterdavis4808
Жыл бұрын
@@ThunderHead289 mavericks and comets are still cool !
@S10lifted95
Жыл бұрын
This device could put your name in the automotive history books next to all the other legendary names like Edelbrock and Iskendarian. It’s genius.
@MultiHotrod74
Жыл бұрын
I'm good with a carb, but they are a limited mechanical device. I can get one pretty close, this unit would make the final trims. Thanks for putting in the effort. I'd be interested in playing with one.
@bobedwardsen
Жыл бұрын
Absolutely love this channel. You are a natural genius, so modest. i feel your pain with moving, the running joke with my friends became "if you wanna sell your house, rent it to Bob"....3 times in 3 years. thank God for storage units.
@robertbranch4791
Жыл бұрын
This series has been a real education. I have a 75 International Harvested with a 392 V-8. There MUST be a way to get better than 9 mpg. Yes. I'm looking for some economy out of a pig with a Thermoquad.
@ditchmelonaficionado
Жыл бұрын
The only other feature I could think of is the ability to switch from AFR to Lambda for the readouts. Cant wait to get my hands on it.
@ThunderHead289
Жыл бұрын
Not a terrible idea
@Wageslave645
Жыл бұрын
+1 on the Lambda readout. So much easier for me than AFR.
@AutoAuctionRebuilds
Жыл бұрын
This is legit genius!!! I'll be on Power Tour this year in a 65 Caddy and so many of these features would be a blessing!
@MoeStewart
Жыл бұрын
The only reason I wanted to switch to EFI was for timing and afr control. If I could keep my existing carb, fuel system, ignition system and distributor it would be a huge bonus, plus a 2 step and anti theft its a no brainer. A nitrous/boost controller would be sweet as well. Sign me up!
@ThunderHead289
Жыл бұрын
The universal relay (that I used to start the car) can be setup as a "window switch" aka RPM threshold switch. Nitrous interlock, shift light - whatever someone wants to do, I left it up to the users creativity.
@MoeStewart
Жыл бұрын
@@ThunderHead289 Awesome, hopefully available soon!
@paulj541
Жыл бұрын
Thank you again, Luke. I am a big fan. Your contributions will go down in history as some of the best. I noticed how you explain things without saying anything bad about the "competition" with the deep pockets. I actually have not watched the lawn mower carb series so now I have to. I am experiencing problems with my construction projects at home due to the high cost of certain materials and have had to just say no and use cheaper substitutes ,,,,,,,,,without sacrificing quality ........and in some instances actually increasing the quality by using the "old fashioned" materials of yesterday such as real wood!!
@Onewheelordeal
Жыл бұрын
It's like being able to slap OBDII into my classics, absolutely amazing!! Pretty cool it can all be done with just a few wires/lines too Wondering if there's a type of vehicle you're looking for in a beta tester?
@jjtt7408
22 күн бұрын
THE SEGMENT WITH YOU SITTING IN THE LAWN CHAIR IS GREAT I WISH YOU STARTED THIS VIDEO WITH THAT SEGMENT AND THEN WENT ON WITH THE REST OF IT / PEOPLE JUST LIKE AND TRUST YOU, GOD HAS BLESSED YOU WITH THOSE QUALITY'S
@meek01__53
Жыл бұрын
This is a GREAT IDEA! I would definitely be interested, waiting on my 67 convertible to come back from my mechanic ( doing a ton of upgrades). Please keep making content you have some excellent videos.
@michaelangelo8001
Жыл бұрын
Impressive. If you market this correctly you should be able to make a lot of money for your trouble. No doubt there is a huge market for it. When are you going to develop a control for those 'computer Quadrajets'? It's a simple PWM control circuit, right? I have four new ones here that I'd love to be able to use on my own projects.
@GreenLantern814
Жыл бұрын
I understand that this is a pet project of yours, but I genuinely hope that you don't abandon it. I really admired the lawn mower carburetor video series, your ingenuity is amazing. And I'd love to throw a setup similar to this into the project car I've inherited (literally, was my dad's High School Jeep).
@TheBrokenLife
Жыл бұрын
A project like this can get as far out of hand as you want it to... But... Since you've already established timing control you're only a couple of wheel speed sensors away from implementing traction control too. It would also be really trick if the fueling side of the cheater was able to be implemented as cruise control since then you'd also have vehicle speed data (or a target to maintain, at least) to work from. That could be more tricky if the cheater is still "just" an air bleed on the fueling side, but you'd have all of the logic available implement other means if you wanted.
@111000100101001
Жыл бұрын
Yes very easy to run down the road with other add ons but I’m sure Luke will tell you that cruise control has its share of liabilities that keeps it as a “standard” offering.
@111000100101001
Жыл бұрын
‘keeps it (off the list) as’
@TheBrokenLife
Жыл бұрын
@@111000100101001 The whole project is a huge liability. Interfering with fueling and timing opens you up to nearly everything that can go wrong with a car. Even if something happens that isn't his fault, defending a wrongful death lawsuit will bankrupt him regardless. There's no amount of waivers or anything else that will protect him from a civil suit. So... He's made whatever peace with that which he feels he needs to. May as well go all out at that point.
@PLUSHAIRPLANECARPET
Жыл бұрын
this is very cool; imagine what it could do for all types of boating, racing etc.
@coreyrowe2052
Жыл бұрын
This is an ingenious invention!! I would love this for my 94' Mustang!!!
@jesse1136
Жыл бұрын
That's awesome. I hope this brings you the success you've earned.
@paulmullins4439
Жыл бұрын
That's really cool great video miss watching your videos keep up the great work thanks for sharing
@foxisretrofitting4556
Жыл бұрын
Great work on this. I love this. Would love to have something like this one day for my van.
@larryreyna7690
Жыл бұрын
Awesome! I'll have to fill out a beta tester application. I think this will be a huge success.
@mustdriveslower
Жыл бұрын
Get it patented and trade marked! This is a winner Luke. Well done.
@hackitgarage6503
Жыл бұрын
Im so glad you actually did it I feel like your going to have a a big name in the car world
@bobwhite4344
Жыл бұрын
interesting vid. I'm glad you didn't retire and i really enjoy the results of your effort.
@johngaller278
Жыл бұрын
Impressive. Just discovered your channel.
@jeffsr8300
Жыл бұрын
Very glad you seem to be fully recovering. Please take care. When this becomes available I'll have to have one. Great job please take care.👍👍🇺🇸🇺🇸
@JohnAsquith-ey6ld
Жыл бұрын
What happened?
@jeffsr8300
Жыл бұрын
@@JohnAsquith-ey6ld no offense intended but you'll have to ask Luke about that.
@christophergaus3996
Жыл бұрын
Jesus, incredible. I remember being floored by my G-Force horsepower meter back in highschool. Your app is magical sir!
@glennnickerson8438
Жыл бұрын
The trick with moving Uncle Luke is the banana box... They're sturdy, the same size and free! 😎
@kelvincarolinaboilawton803
Жыл бұрын
Exactly Moving isn't fun But to a bigger place Cool
@neilrideout408
Жыл бұрын
Awesome, thank you so much for what you do for carbs.
@MegaBlazed
Жыл бұрын
Dude your a real person that's what brings your viewers .hope you enjoy your new place .stevo out
@trentmoseley
Жыл бұрын
This definitely needs to be on an episode of Engine Masters. That would be awesome.
@jeffdarlington3194
Жыл бұрын
Thank you looking forward to tuning for reliability, performance and driving comfort
@jonahhuff184
Жыл бұрын
This wizard and his elegtricle sorceries, he can't be trusted with that much power!
@chrisw5837
Жыл бұрын
This sounds like a wonderful product. Sharing your knowledge and helping other enthusiasts is awesome and I hope you continue even if it’s on a limited basis.
@ThomasP187
Жыл бұрын
Really cool project. So much much potential here.
@johngray3860
Жыл бұрын
Buddy! You're back!!! Damn good to see you!
@robertmoczulski3096
Жыл бұрын
This is awesome!!!!! We knew you would be working on something…
@bluedimitri
Жыл бұрын
Hi Luke watching from the UK. Watched all your content and still enjoy very all much. Look forward to the next one
@kerzwhile
Жыл бұрын
Your truly onto something revolutionary for the classic car community!!! Imo..
@brodneral4621
Жыл бұрын
As soon as they are available, I am buying at least 3. I am a big supporter of carbbed vehicles over fuel injection and I own several antique cars that i want to keep on the road. This carb cheater would just help them run that much smoother and more efficient. Can't wait for it.
Пікірлер: 1,1 М.