i dont even actuall have the wings problem i even had some difficulties getting them in, and they hold PERFECTLY fine lol
@JustinJohnson-vc1gr
2 жыл бұрын
I honestly think the custom 91 looks better with the King Ghidorah. The bugger body on the NECA 89 reminds me a lot of the 91 suit so all we'd need is a custom headsculpt. If you ever made custom headsculpts I'd buy a 91 headsculpt for sure
@TheHowbbyist
2 жыл бұрын
Thank you! 😊
@Hydrazilla98
2 жыл бұрын
Oh hey I just found the channel through the Bootleg SHMA Godzilla 2021 and this just popped up! Loved the in-depth analysis you gave cause my own bootleg Ghidorah 1991 is about to come in pretty soon! I still need to see your 3rd party Showa Ghidorah video too since I also have that coming in. Loving your videos, dude! And the NECA 91 custom looks really cool!
@TheHowbbyist
2 жыл бұрын
Thank you! 😍 Excited for your purchases!
@Hydrazilla98
2 жыл бұрын
@@TheHowbbyist Hi hi, back again. I got my figure a couple of weeks ago and he's been an absolute blast! I do have one question. Did the left wing on your figure have trouble staying in? The left wing mine wouldn't stay in at all, so I went and glued it in
@shamisiwan9059
3 ай бұрын
I love your bootleg figure videos.
@voronOsphere
2 жыл бұрын
Great unboxing video! Thanks!
@TheHowbbyist
2 жыл бұрын
You're welcome! Thank you for watching! 😊
@river7601
2 жыл бұрын
Your customs are amazing too
@TheHowbbyist
2 жыл бұрын
Thank you!
@nolongerposting5317
2 жыл бұрын
You could also notice the body is the same as the Bootleg showa sh monster arts
@TheHowbbyist
2 жыл бұрын
True. The Showa King Ghidorah's body was based on this figure's sculpt. SH Monsterarts never released a Showa King Ghidorah figure. Hence, I always refer to that figure as "3rd party" in my review video about it. 😉
@MopMotionStudios
2 жыл бұрын
Sorry i could not make it here at the time you uploaded this i was sick but now im good
@TheHowbbyist
2 жыл бұрын
No worries. Glad you are ok. Thanks for watching. 😍
@customclonecorner3510
2 жыл бұрын
Looks like you got a good one...Box and all! I have been waiting to see somebody get one that has an intact box and all the accessories. Some people dont get the beams and beam stand, some dont get the flight stand, some only get the figure. Could you please post a link to your ebay or aliexpress seller? I would like to buy one.
@TheHowbbyist
2 жыл бұрын
Thanks! I got this off Shopee though here in the Philippines. The link is on the description.
@MopMotionStudios
2 жыл бұрын
Wow king ghidorah
@lambdadelta821
9 ай бұрын
i find it so ironic that this and the showa ghidorah bootleg (or 3rd party) is much cheaper than 90% of SHMA Figures lmao, they arent even bad for bootlegs too.
@TheHowbbyist
9 ай бұрын
True. Although, licensing is pretty expensive. I imagine Toho did not give Bandai early access to their stills and video of these monsters for free. They also had to pay for R&D, Marketing and all those other people for each release. Except for R&D, the bootleg makers don't have to pay for those as they are riding on to the popularity of the original brand already and sell their stuff on online marketplaces. Does the original warrant the price? Maybe. Especially if you intend to resell in the future. Are original figures for everbody? No. Unless you're really seriously collecting, a bootleg fits just fine. As a play toy, a photography/stop motion subject it still fits the bill. 😊
@lambdadelta821
9 ай бұрын
@@TheHowbbyist yeah its such a shame to imagine how expensive og godzilla figures could get, thats why im always hoping for another 3rd party godzilla figure from legend creations like their showa ghidorah.
@troodon-St
Жыл бұрын
Hello, good video. I have a question, do the lower jaws come like this from the factory or did you fix them? I have seen that departures usually come or later than they should, I hope you answer my question
@TheHowbbyist
Жыл бұрын
The lower jaw came in like that. I didn't do any fix to it whatsoever. I don't think its being sold by just one company, since its a bootleg. Better get a figure from a source that at least have good reviews from other collectors or someone you have ordered before.
@river7601
2 жыл бұрын
Also love your content
@kokweit
10 ай бұрын
This is a pirated version of SH MonterArt?
@TheHowbbyist
10 ай бұрын
Yes that's correct
@Nicolos117
8 ай бұрын
How do you know if you got a bootleg one
@TheHowbbyist
8 ай бұрын
The boxes are different. The bootleg does not have any of the branding information/logo (Bandai, Sh Monsterarts, Tamashii Nations)
@cjcurtisplus5
2 жыл бұрын
Could we get a review of the custom NECA 1991?
@TheHowbbyist
2 жыл бұрын
Thank you for your suggestion. We will consider this on our future videos. 😊
@fazarfazar58
2 жыл бұрын
Bro your so lucky you got the bootleg where the right and lefts head lower jaws arent to long
@TheHowbbyist
2 жыл бұрын
Thanks! I believe they are a bit long. Not too distracting though.
@fazarfazar58
2 жыл бұрын
@@TheHowbbyist i just got a bootleg one and i'm lucky that it came with the beams , flight stand too and the jaws aren't that long but it is longer than the upper jaw i have three problems one is the wings it keeps popping off and when i use the flight stand it pops off but i don't mind it the second one is what i mind its the flight stand when i put the figure on the flight stand it disconnects leading to the figure to fall luckily i was moving it on the table and its hard to balance the figure on the flight stand it is easy for the top part to fall off causing my figure to fall off . Third problem the Kevin head one of the necks had been damaged it has been squashed a bit like the part i don't mind it that much but it looks bad when i'm trying to pose the necks.
@TheHowbbyist
2 жыл бұрын
@@fazarfazar58 you can try putting some electrical tape on the joint of wing before inserting the wing to make it mor snugly fit. As for the flight stand I wouldnt put the figure there at all. Its not a good quality stand to begin with.
@fazarfazar58
2 жыл бұрын
@@TheHowbbyist true
@immunecookie0179
Жыл бұрын
You have an issue trying get one of the wings on the figure? I have the same problem here with my bootleg King Ghidorah 1964 figure which I got last week.
@TheHowbbyist
Жыл бұрын
Yeah the joint is just too short and too thin to suppost such a heavy wing. I made the joint thicker by putting some electrical tape on it before plugging in the wing. That seemed to work fine for me so far. 😊
@immunecookie0179
6 ай бұрын
@@TheHowbbyistsorry for the late response but the main reason why my Showa Ghidorah’s figure’s wing couldn’t attach the hinge into the socket was because there was something inside the socket that the hinge was supposed to have two side holes but only had one, so then I had to sand down this piece that prevented the wing from getting attached and it worked, my SHMA showa King Ghidorah figure has both of its wings attached.
@Huangjinlai168
2 жыл бұрын
nice
@TheHowbbyist
2 жыл бұрын
Thanks! 😊
@justinrosa7155
2 жыл бұрын
Can you make Marvel Godzilla and American Godzilla 1994 of action figures!?
@TheHowbbyist
2 жыл бұрын
Thank you for your suggestions! We will consider this on our future custom figures. 😉
@justinrosa7155
2 жыл бұрын
Your welcome and also can you make Godzilla 1998 or Zilla of action figure too!?🙄
@MESSIFTBL30
2 жыл бұрын
I love it
@TheHowbbyist
2 жыл бұрын
Thanks!!
@MESSIFTBL30
2 жыл бұрын
@@TheHowbbyist I would like if you customized playmates Rodan
@TheHowbbyist
2 жыл бұрын
Thanks for the suggestion. Unfortunately I don't have the figure as Playmates are not being carried by our supplier here. But we'll see. 😉
@eriksonbro-ductions4701
Жыл бұрын
Where’d you get him dude I rlly want that one!
@TheHowbbyist
Жыл бұрын
The link to the Shopee store where I got it is on the description. If you are in the Philippines we can also sell this figure to you. Just send us a message on our Facebook page. 😉
@eriksonbro-ductions4701
Жыл бұрын
@@TheHowbbyist oh yeah I saw that and unfortunately I’m not in the Philippines but can I still order it from that website I’m in America
@godzillafan9773
2 жыл бұрын
Where did you buy
@TheHowbbyist
2 жыл бұрын
Hi! We got it from Shopee Philippines. You can click on the link on the video description to check out where we got the figure.
@river7601
2 жыл бұрын
Its not bad four a bootleg
@23_lolface
2 ай бұрын
I own one and it looks good but it falls apart in your hands becuase the joints are lose as hell
@kaiju-odanny9778
2 жыл бұрын
Got to say, your customized Godzilla 1991 looks rad! Isn't there a video to it by chance? And by the way, how about you'll do a customized Burning Godzilla by using the NECA Godzilla 1989 figure which is based on this video. kzitem.info/news/bejne/uaeZmJyirJN2Y5g
@TheHowbbyist
2 жыл бұрын
Thank you! 😊 You can check out our custom Godzilla 1991 video here: kzitem.info/news/bejne/t218021ogYliZmk
Пікірлер: 56