Just hooked one of these up to my Ktm 2013 xc150, when I rev throttle the light dimmed so I hooked up a capacitor and all is good
@brianwilson1145
4 жыл бұрын
What compactor did you use?
@markbarylski2930
3 жыл бұрын
Thank you for stating the electrical (brown/blue) because mine came with the Pos+Neg in the wrong slots on the connector
@liamproudlock6054
4 жыл бұрын
Great Video, pleased you mentioned the wiring the instructions just leave that out. Fitted mine to high beam also. 👍
@supernovadw
4 жыл бұрын
Inspired me to order one, looks good! Thanks for the video
@moonshineexc
2 жыл бұрын
There is different thingy for your bars that makes it low beam ... I have no idea what it is called that’s how I ended up here . Pa mine came with a plug to plug straight in
@andrewb722
2 жыл бұрын
Hi plugged mine in and nothing comes on ktm 500 2018 .. any suggestions 🤔?
@andreiVJ
3 жыл бұрын
Thanks for sharing this! 👍🏻
@jbstrongman
2 жыл бұрын
I did mine the same way. Low beam light is off. High beam light is on
@acrodylan
4 жыл бұрын
So you did not need a rectifier at all?
@gregporter5299
4 жыл бұрын
When adjusting the pitch of the light. There is an adjuster option at the bottom of the light mount. This might only be on the latest release??
@crazybob1954mo
4 жыл бұрын
Right.... But it is the top plate that has control of the angle of the lamp. Also, I purchased the Exact Same 48W LED spot work light from eBay for $9.88 delivered to my door. I had an old plastic light visor ... SO I made my own 48watt lamp for less than $10. LOL
@gregporter5299
4 жыл бұрын
@@crazybob1954mo good to know there are cheap replacements if the LED part fails.
@nomnoo2011
3 жыл бұрын
hi. I have 2018 KTM 500 exc-f US version, will it fit my motorcycle? my model not mentioned on the box. Thank you!
@lancecrackers495
3 жыл бұрын
They have this for your bike bro. Google it homie
@damontoulouse4564
3 жыл бұрын
Does it have high beam and low beam ????
@bleekaman
2 жыл бұрын
No, there is a "dimmer" kit available at Slavens, and taco moto.
@ZonaEnduro
4 жыл бұрын
The cheap version is to use an LED bulb to replace the original one.
@crazybob1954mo
4 жыл бұрын
YES, HaHa.. I also purchased the Exact Same 48W LED spot work light from eBay for $9.88 delivered to my door. I had an old plastic light visor ... SO I made my own 48watt lamp for less than $10. LOL
@renegoudreau8578
4 жыл бұрын
@@crazybob1954mo what bulb did you order?
@crazybob1954mo
4 жыл бұрын
@@renegoudreau8578 I got one just like this.. Make Sure it is the thick one with all aluminum housing. There are some cheap smaller, thinner ones made of Plastic.. The one I have is a Fabulous light that runs on 12 VDC...
@crazybob1954mo
4 жыл бұрын
@@renegoudreau8578 Good Luck.... OK...
@zzxx33mh
3 жыл бұрын
@@crazybob1954mo true, having WR450,want to ride offroad at night..should get a good quality led bulp, wish acerbis make same for wr450..
@Ridingpower_com
4 жыл бұрын
hello friend. mine is flickering all the time and it is anooying, when i give gas its not . do you have any solution?? i have exc 300 2017. carb
@jamiejam3490
4 жыл бұрын
Thats because your bike is making AC not DC .. go on ebay you can buy AC to DC converter
@crazybob1954mo
4 жыл бұрын
You need to buy a full wave bridge rectifier for @ $3.00 from eBay to rectify the AC voltage to DC.
@rallymontage1410
4 жыл бұрын
Can i use this light on the road?
@stakesysmetalworkmachinery7402
4 жыл бұрын
Good vid. Was just about to buy a Baja.
@RcH03gaming
4 жыл бұрын
why couldn't I put it on a 125? doesn't a ktm 125 generate enought tension or something like that?
Пікірлер: 31