Nice tutorial man. Great explanations throughout and appreciate you posting this video and all the info. Any pics of any accessories you've added since installing these rails?
@VIPHoldings
Жыл бұрын
Actually, I haven't added anything yet. We've used a cargo bag from Harbor Freight a couple of times and worked very well. Thank you so much for your comment, and welcome to the channel!
@jaghedez
3 жыл бұрын
NICE JOB BUDDY
@VIPHoldings
3 жыл бұрын
Thank you sir! Welcome to the channel!
@michaelclary3123
3 жыл бұрын
Did all pieces and parts come in one kit from the website you mentioned or did you have to buy them all individually, e.g., left side, right side, covers, etc. if so, how did you know to include and which not to?
@VIPHoldings
3 жыл бұрын
Hey Michael, welcome to the channel! All the parts are actually included. Here's a link if you want to take a look. amzn.to/2Odsw4c Thank you for watching!
@TheJccbc007
Жыл бұрын
Will this work with o e m roof rails taken from another m d x to my m d x?
@VIPHoldings
Жыл бұрын
You would have to see if those years are compatible but if they are, yes.
@TheJccbc007
Жыл бұрын
Coming off an 09 to a 2010
@VIPHoldings
Жыл бұрын
I searched it online, and it says that 2007 to 2013 are interchangeable.
@TheJccbc007
Жыл бұрын
@@VIPHoldings thanks brother
@calvintran1040
3 жыл бұрын
1673 mm is 65.86 inches. Must be a typo in the guide. The remaining conversions seem to be correct.
@VIPHoldings
3 жыл бұрын
That is possible, I added the link for the installation PDF which should give you the exact measurements that you'll be looking for. Welcome to the channel btw!
@murphysf6969
3 жыл бұрын
@@VIPHoldings Hi - I am about to do this job on my 2008 MDX. I have the Acura Honda Installation Instructions Publication No. BII 46629 and noticed the same error. It lists the length as 1673 mm (66.8 in). These two numbers are not equal, there is an inch difference. Which number is correct?
@VIPHoldings
3 жыл бұрын
It's been awhile since I installed my rack but I'm pretty sure I used a metric tape measure. Also, Acura is Japanese which exclusively is the metric system so I would definitely go that way. Hope this helps. If it's not too much of a bother, please send photos when you get done. Good luck and welcome to the channel!
@murphysf6969
3 жыл бұрын
@@VIPHoldings thanks , I noticed that the 2007 - 2009 is part number 08L02-STX-201 and 2010 - 2013 is part number 08L02-STX-210B. I wonder what the differences are? Also the instructions I found are for a 2012. Do you know where I can get the instructions for the 2008? I have a feeling the measurements to cut are different.
@VIPHoldings
3 жыл бұрын
@@murphysf6969 Sorry, I looked and I'm only finding ones that say "2012" also. The package you received didn't come with any instructions or maybe a link to a website that would?
@Teamistry
2 жыл бұрын
Just curious about your experience with the seller? Is the website legit? There are some complaints the website never send the ordered parts.
@VIPHoldings
2 жыл бұрын
I'm always nervous when shopping with an online store that I don't know but they had the best price at the time. They are legit. I actually looked them up online and found their phone number (not from their website) called them and asked a few questions to try to verify some things like their address for example.
@ichigo31045
Жыл бұрын
Your Amazon link is a different product
@VIPHoldings
Жыл бұрын
Yes, unfortunately, the company I bought mine from doesn't do partnerships, so I found one similar and cheaper than mine.
@ichigo31045
Жыл бұрын
@@VIPHoldings do you know if the cheaper Amazon one is of great quality as the other product
@VIPHoldings
Жыл бұрын
I don't think I would consider the one I purchased,"Great quality." It does its job as I believe the one from Amazon would.
@ichigo31045
Жыл бұрын
@@VIPHoldings thank you. One more question, I’ve seen reviews stating they needed to drill different holes with the Amazon rail. Would that be the case for a 2011 Acura MDX
@VIPHoldings
Жыл бұрын
I would not recommend ever drilling holes in your roof. As for mine, no, there are pre-installed bolts inside the trim lines. If you find out that the one I'm partnered with recommends this practice, please let me know, and I will find a better one.
Пікірлер: 26