How to remove and install 22mm adjustable sway bar from Progress Group. This sway bar will allow better handling and traction when cornering. Definitely a noticeable and worthy mod. Install is for 2009 and up. (2010, 2011, 2012, 2013, and 2014)
Tools needed:
12mm deep socket wrench
14mm wrench
14mm socket wrench
allen wrench (unknown size)
13/32mm drill bit or 7/16mm and power drill
Review from HeelToe Automotive:
"The rear sway bar is the most commonly upgraded suspension part in a front-wheel drive car, after shocks and springs. The rear sway bar helps make up for FF cars' tendency to push, or understeer, into corners. Upgrading the rear sway bar noticeably improves handling on the TSX without compromising ride quality. This part is easily the most Bang for the Buck you are going to get out of your TSX suspension.
We have felt that the stock 2009 TSX suspension is indeed very well setup, and the chassis is noticeably more rigid than the outgoing model. And while it feels balanced through turns there is a distinct feeling that the rear end is just following what the front of the car is doing. With the addition of a larger rear sway bar, the car feels flatter and more confident than before in turns. The rear seems to help "steer" the car around turns better. This is not the same experience we've had in the past, where a rear sway bar will "fix" a front wheel drive car's tendencies. Instead this bar helps make an already nimble and balanced chassis feel even better!"
"Progress Suspension anti-roll bars (or sway bars) dramatically improve handling by reducing the traction-robbing body glean h that rolls part of the outside tires off the pavement. Progress Groups's Sport-tuned Anti-roll bars replace skinny OEM bars and rubber bushings with larger diameter (stiffer) alloy steel bars and polyurethane bushings. More roll stiffness means less body lean, and the tires stay flatter on the pavement (larger contact patches). The result is more grip and added driver control!
Less body roll means more traction, faster cornering speeds, and increased driver confidence.
Polyurethane bushings produce crisp response on turn-in.
2009+ TSX BAR IS A 22MM BAR WITH TWO MOUNTING HOLES FOR STIFFNESS ADJUSTMENT. THIS IS AN ADJUSTABLE SWAY BAR WHICH ALLOWS YOU TO FINE TUNE THE HANDLING OF YOUR CAR
Installation does not impact alignment angles
Ride quality is not impacted over straight roads; only noticeable while cornering or transversing uneven surfaces.
Progress Anti-roll bars are cold-formed in-house using custom-built precision bending equipment. Both laser-cut and CNC bar ends are MIG welded in place using a precise fixture for an exact fit.
For best street performance results, use in conjunction with a sports damper kit, such as the Tein Super Street or Basic Damper Kits." -From HeelToe Automotive
Негізгі бет Автокөліктер мен көлік құралдары Acura TSX Rear Sway-Bar Install (Progress RSB, 2009+ Cu2)
Пікірлер: 33