Wow I was blown away at the end when you spun the wheels. They just keep spinning and spinning for ever. Talk about perfect!
@AdamDrake
5 жыл бұрын
:)
@eminstinct4114
2 жыл бұрын
Agreed
@tlrcamp8009
6 ай бұрын
Would 0W-20 be good for rubber seal bearings instead of the tri-flo?
@manaz28jose
5 жыл бұрын
I'm digging that jewelry cleaner box. What brand is it, and where can I buy one? TIA Adam. 😎
@AdamDrake
5 жыл бұрын
amzn.to/2XmpiLP
@davidaarons2488
5 жыл бұрын
Hey Adam, hope all is good with you. Can you get NMB bearings for other brands? God Bless Ya Dave
@adamdrake8006
5 жыл бұрын
The 8x16x5 and 5x10x4 NMB bearings will work with most 1/8th brands of vehicles.
@seanmccormack5888
4 жыл бұрын
Adam question . Once you start on this regime with cleaning and light oiling of bearings do you need to clean and oil them right after use so they don’t seize up? I followed the same regime and raced on a track that was wet when we started. I didn’t get to cleaning the buggy until the next day and some of the wheel bearings had siezed. I managed to free them up as this was only one day but now I’m wondering if I used enough oil on them. Any ideas? Thank Sean NZ
@AdamDrake
4 жыл бұрын
Yes, it's not a bad idea to oil the bearings and pretty much any of the moving parts. After run oil is really important to have them last a long time especially if it's humid.
@shaneglover99
Жыл бұрын
Can you give me a link to that bearing oil. Also can you give me a link to good Tmaxx bearings. I'm about to buy one of your .21 JPX Jammin engine for the Maxx so want it perfect
@Remcot3
Жыл бұрын
top !
@shaneglover99
Жыл бұрын
Hi Adam, I just purchased one of your Jammin .21 on ebay for my Tmaxx 3.3, and was wondering since it was tuned by you if you could tell me what's the best plug and fuel used please bro. I am so excited to see what it will do. Any help would be so highly appreciated sir. Thank you
@alexandre6940
7 ай бұрын
The end is terrific ! 😮
@skaargan
4 жыл бұрын
Hey Adam, I see almot all NMB bearings i found are metal shielded. Does the metal shielded bearing can hold up outdoor dusty track environment?
@AdamDrake
4 жыл бұрын
Yes, they still work great for outdoor racing and they're pretty easy to clean.
@bluegroovemodelsports9650
Жыл бұрын
Great tips. Good maintenance and race prep as always from Adam Drake....thanks for sharing
@AdamDrake
Жыл бұрын
Thank you!
@vloneseraph
2 жыл бұрын
do you use NMB's for every bearing in the car or just the wheel bearings? and do you clean and relube a brand new set?
@AdamDrake
2 жыл бұрын
All the 8x16x5's and 6x13x5's are NMB bearings. Not when they are new.
@donaldhoneycutt3879
3 жыл бұрын
Do you do this to all the bearings on the machine or just the wheel bearings? Thanks in advance and great videos man!!
@AdamDrake
3 жыл бұрын
I do it to all the bearings.
@mastmec
5 жыл бұрын
So you just use metal shielded bearings ? Do you use rubber sealed anywhere on the car ?
@AdamDrake
5 жыл бұрын
The inner hub bearings use a rubber seal, but the rest of the bearings I use have a metal shield.
@Duececutty6972
3 жыл бұрын
Thanks Adam! Great videos for many years. Almost making me want to switch to Mugen because you provide so much great information. 😉
@AdamDrake
3 жыл бұрын
Very cool, let me know if you have any questions.
@j-1lokes294
5 жыл бұрын
Adam were did you get your blue container cleaner..:
@AdamDrake
5 жыл бұрын
I don't remember, I've had it 10+ years. :) Here's a link to a similar one on Amazon. amzn.to/2FwX61o
@sith4mmer558
5 жыл бұрын
Adam... where did you get that trick agitating box?
@AdamDrake
5 жыл бұрын
amzn.to/2XmpiLP
@devil_samuraix6176
3 жыл бұрын
full ceramic bearings cant be used?
@AdamDrake
3 жыл бұрын
You can
@skycorrigan6511
3 жыл бұрын
That tiny US cleaner in awesome!
@AdamDrake
3 жыл бұрын
I love it!
@brandonsheldon4783
3 жыл бұрын
What about bearing grease to thick?
@AdamDrake
3 жыл бұрын
Yes, I prefer the light oil.
@johnband3
5 жыл бұрын
Thanks for sharing, incredibly helpful.
@AdamDrake
5 жыл бұрын
My pleasure!
@slimjimmcsausage1279
5 жыл бұрын
Between a metal shield or rubber, which of the two do you think have a better seal against dirt.? What are the pros and cons of rubber and metal ?
@trentmarlowe7655
5 жыл бұрын
Metal shielded = less friction Rubber shielded = better sealing
@AdamDrake
5 жыл бұрын
A rubber seal will seal better, but have more drag.
@kruzracing1692
5 жыл бұрын
Heck yeah. I like doing this. Nice trick on the jewelry cleaner agitator!
@AdamDrake
5 жыл бұрын
amzn.to/2XmpiLP
@gmax876
3 жыл бұрын
The Legend! I'll be binge watching.
@AdamDrake
3 жыл бұрын
Thank you!
@agustinsegovia6523
5 жыл бұрын
Thanks for the video! It helps a lot!
@AdamDrake
5 жыл бұрын
My pleasure!
@BDcumminsdiesel
5 жыл бұрын
Can you use gun oil on the bearings
@AdamDrake
5 жыл бұрын
I haven't tried that myself.
@nardo2354
5 жыл бұрын
👍👍wow they really roll. Great video!
@AdamDrake
5 жыл бұрын
Thank you!
@zynaryzaidi7883
5 жыл бұрын
Put the bearing in zippo oil. The shake them in a small glass bottle..try it!
@AdamDrake
5 жыл бұрын
Thanks! Like zippoo lighter fluid or is there a special oil?
@zynaryzaidi7883
5 жыл бұрын
Zippo lighter liquid thats it!..
@AdamDrake
5 жыл бұрын
Very interesting.
@zynaryzaidi7883
5 жыл бұрын
@@AdamDrake shake the bearing in zippo liquid with a small glass bottle, then u will see all the dirts come out. We also apllied it in mini tamiya 4x4 bearing..see the differences.
@AdamDrake
5 жыл бұрын
Very cool, thank you.
@HL-OOI
5 жыл бұрын
Basically these bearings do not have grease inside right?
@kruzracing1692
5 жыл бұрын
Yeah, no grease. The grease would hold dust. Degreaser and brake cleaner would remove grease if it HAD any.
@HL-OOI
5 жыл бұрын
kruz racing169 so can I do this with rubber shield bearings? Remove the grease and then oil it..😁
@kruzracing1692
5 жыл бұрын
@@HL-OOI , yes you can. I know that most remove the rubber covers if using brake cleaner.
Пікірлер: 69