Ha! My 4 shoe clutch is already on order from AMAIN. Seeing friends set ups, it's just that more smoother. Great tips as usual Mr. Drake. Happy New Year's eve and New Year to you and yours.
@AdamDrake
4 жыл бұрын
Thank you sir. It's a great clutch system.
@robertshaver4432
4 жыл бұрын
Thank you Adam, I'm just starting to experiment with clutch shoes and springs: Thanks for all of your "insightful help" Dude (with all your videos); THANK YOU!
@AdamDrake
4 жыл бұрын
My pleasure, thank you!
@rccarhobbyinarabic4088
4 жыл бұрын
Thank you for your constant explanation, Dr. adam, for all that is useful in this beautiful sport and the great support for the Mugen Seiki models😍😍😍😍😍👍👍👍👍Unfortunately, we do not find this support and clarification in schumacher and xray models, although they are all companies that provide professional models, but they lack video clips to facilitate maintenance.
@AdamDrake
4 жыл бұрын
That's why you should choose Mugen Seiki! :)
@savantelite
4 жыл бұрын
Any way you could update your video descriptions? Every video shows up as "Adam Drake from Mugen Seiki Racing talks about ..." and i have no idea what the video is going to go over. Thanks.
@robertshaver4432
4 жыл бұрын
put your mouse pointer on the shortened title and it expands to show the entire title
@AdamDrake
4 жыл бұрын
@@robertshaver4432 It should show the entire title, but I'll look into that. Thanks.
@rajaa111
4 жыл бұрын
Nice, that's similar to the AE clutch with the hex screw for the clutch shoes, I still love the novarossi buggy clutch it's been doing me very well
@AdamDrake
4 жыл бұрын
Yes sir!
@manaz28jose
4 жыл бұрын
Another great vid Adam. Thanks 👍😎
@AdamDrake
4 жыл бұрын
Thank you!
@maxrackstraw
4 жыл бұрын
You really should do a in-depth video on engine tuning, i have a new kyosho engine and i cant seem to get the tune right and there is not a very good recent video on it yet. I take a lot of your advice and my friend who has just got into the hobby finds your video extremely useful too!
@AdamDrake
4 жыл бұрын
That's a great idea and I've been planning to do this for a while. I just need to make it happen. :)
@danielwalter5268
4 жыл бұрын
will this fit a Xray XB8 19? if not will the OS clutch fit?
@AdamDrake
4 жыл бұрын
Yes, both should fit the Xray and we have the OS clutches available if needed on www.thedrakeracing.com
@Duececutty6972
3 жыл бұрын
Nice video as usual Adam. First time considering running a 4 shoe. I want to run it in my buggy. How can I make the 34mm flywheel fit properly? Shim? Washers? What do you do for buggy? Thanks
@Duececutty6972
3 жыл бұрын
Never mind Adam. I see this isn’t compatible with a Kyosho MP9
@AdamDrake
3 жыл бұрын
The OS 4 shoe clutch works on the Kyosho and we have them on sale at the moment. www.thedrakeracing.com
@Duececutty6972
3 жыл бұрын
Already on your website. Thank you
@JoseTorres-fo8lm
4 жыл бұрын
Adsm salutes ✌🏻✌🏻 One question: For low end power which springs and shoes you recommend me? Please let me know Thank you ✌🏻👍🏻
@AdamDrake
4 жыл бұрын
Hello Jose, In buggy, start with two carbon and .9 springs and two aluminum with 1.0 springs. In truck start with all aluminum and 1.0 springs. Adam
@dylanpeterson7398
4 жыл бұрын
Hey Adam Ive been trying to get sponsored and I got it by team Losi you inspired me to race and have fun keep up the vids
@AdamDrake
4 жыл бұрын
Congratulations, thank you very much!
@TheOffgridkid
4 жыл бұрын
What up Adam Happy New Year!
@AdamDrake
4 жыл бұрын
Happy New Year!
@ar-arnitro
4 жыл бұрын
Nice video very helpful👍👍👍
@AdamDrake
4 жыл бұрын
Thanks!
@germanmartinelliguerra5895
3 жыл бұрын
Does it fit the mugen bell?
@AdamDrake
3 жыл бұрын
No, you need to use the Protek bell.
@MrSpd2009
4 жыл бұрын
Adam, can you take the clutch system off your engine with out having to take the pins, shoes and springs off? I think with the AE clutch you have to disassemble the clutch before taking it off the engine. This would be helpful if you just want to take clutch off, clean up the engine and then reassemble. Thanks!
@fiveoboy01
4 жыл бұрын
These 4 shoe style clutches can be removed from the engine with the shoes, springs and pins installed. Just pull the crank nut off. Usually I use a puller on the flywheel.
@AdamDrake
4 жыл бұрын
Hello Rob, it's best to remove the shoes first. Similar to the AE style.
@jongonegone1262
4 жыл бұрын
drakes working the new shades, probaly rhondas idea. hes outside already, its winter, not on drakes channel. outdoor racing allyear. nice video.
@AdamDrake
4 жыл бұрын
Haha
@jongonegone1262
4 жыл бұрын
@@AdamDrake you must be bored ? ignoring your fans for months , now locked down going threw old replies. ha ha to you sir !!!!! will there be a spring sighting of the famous rhonda ??? mugen- seiki should be sending over some boxes of new bathing suits for the couple. wait wait, i hear it, listen, fed-x at the door now with bonus check from mugen. show me the money.
@jamierabb5065
4 жыл бұрын
What. Box is that,. The blue one?
@AdamDrake
4 жыл бұрын
I don't think this one is available anymore, but the larger one is still available. amzn.to/2Qh0qn6
@TheBeardedGrump
4 жыл бұрын
How much run time are you getting out of the shoes?
@AdamDrake
4 жыл бұрын
There can be a number of variables like track conditions, springs, and how much it slips, but you shouldn't have a problem getting at least a gallon on a set of shoes.
@TheBeardedGrump
4 жыл бұрын
@@AdamDrake I run the ae one now. I've been really impressed by how long the shoes last.
@AdamDrake
4 жыл бұрын
@@TheBeardedGrump The shoe life should be very similar to the AE aluminum and hard carbon shoes.
@TheBeardedGrump
4 жыл бұрын
@@AdamDrake do you know if the protek and/or losi 4 shoe clutch shoes will work on the associated clutch?
@AdamDrake
4 жыл бұрын
@@TheBeardedGrump The Protek ones will for sure. Not sure about the Losi shoes.
@ALEXVELASCOSXR800
4 жыл бұрын
wwwooowwww brutal !!!!
@AdamDrake
4 жыл бұрын
Haha
@CueBallRacer
4 жыл бұрын
Hey Adam.Can you take the flywheel off your engine.With shoes on the flywheel.
@AdamDrake
4 жыл бұрын
Technically you can, but it's much easier if you remove the shoes and springs from the flywheel first.
@CueBallRacer
4 жыл бұрын
@@AdamDrake OK
@CueBallRacer
4 жыл бұрын
@@AdamDrake I have not had a chance to race with them yet.
@AdamDrake
4 жыл бұрын
@@CueBallRacer 10-4.
@rafaelsilveira26
3 жыл бұрын
This could be used on a kyosho gt2 onroad
@AdamDrake
3 жыл бұрын
You would need to make sure the bell fits on your vehicle.
Пікірлер: 54