Carbon brushes, are the operating part. Their function is to carry an electrical charge. They are constantly in motion, which is the main reason for their gradual wear.
The brushes affect the correct operation of the machine's motor, so it is important to remember to check the wear condition of the brushes and replace them regularly. Whenever there is any worrying operation of the machine, it is always a good idea to check their degree of wear and their correct position and replace them if necessary.
CHANGING THE CARBON BRUSHES IN D15 POLISHING MACHINE
1. Prepare the carbon brushes, cross screwdriver and a slot screwdriver.
2. Using the cross screwdriver unscrew the 4 screws of the cover, and take it off.
3. Gently move the pressure-spring of the brush.
4. Carefully take out the brush and put it the new one with the help of the slot screwdriver.
5. Put on the pressure-spring of the brush.
6. Carefully put the machine on its other side.
7. Carefully move away the pressure-spring of the brush.
8. Gently take out the brush and insert the new one.
9. Put on the pressure-spring of the brush.
10. Carefully turn the machine with it’s backing plate facing down.
11. Notice the cables while putting on the cover.
12. Put on the cover, turn the machine and screw the screws.
Read more about D15: en.adbl.eu/produkt/adbl-rolle...
#adbl #carbonbrush #D15adbl
Негізгі бет Автокөліктер мен көлік құралдары ADBL service - changing the carbon brushes in D15 polishing machines - tutorial
Пікірлер