Move the beater down to hit the centre of the cajon because the snare wires are at the top of the cajon. The best bass note is in the centre or bottom third of the cajon. Your kick will sound 1000 times better when the beater is hitting the correct spot.
@musicalmiscellany
2 жыл бұрын
I thought that when I was assembling everything but unfortunately the pedal is pretty high so you'd have to have a really short beater (so short that I don't think you'd get a good sound). It may be a more long term solution to build some sort of a base that would raise the cajon a few inches so the beater is closer to the center. Again... this was a quick and dirty mod. Thanks for watching.
@piperofsimms
Жыл бұрын
Very helpful ! Thank you from Tucson
@musicalmiscellany
Жыл бұрын
I appreciate you tuning in. Glad it was helpful.
@gordonparrishjr6228
Ай бұрын
Clever solution
@musicalmiscellany
Ай бұрын
Thanks for watching.
@CurtisGrant-BoilerLA80
6 ай бұрын
I need this!!!
@musicalmiscellany
6 ай бұрын
Thanks for checking it out. I hope the vid was helpful.
@brendanm6921
3 жыл бұрын
Great video, mate. I was searching for videos on this topic and just so happened to see that you of all people had done this. I must have missed it when you uploaded it. I don't recommend you use the original drum beater again, cajons really aren't hardy beasts at all. A friend of mine actually put a hole in the front of hers just from using her foot as a bass beater and not too hard either. And I have to applaud the door hinge. Even for you that's some resourceful imagination.
@musicalmiscellany
3 жыл бұрын
Thanks for checking it out. Good to know about the standard beater. I thought it was just a little too hard. I appreciate your feedback.
@MariaCalfaDePaul
3 жыл бұрын
You are amazing. YOu know you would have loved digging through my late dad's workshop~ I KNOW I got rid of hinges,..LOVED your idea. Sounds Great too!~! Awesome Video~
@musicalmiscellany
3 жыл бұрын
Thanks.. and it sounds like your dad had some cool stuff. I'm sure you miss him very much. Stay tuned... I've got a couple more videos coming that are in this same wheelhouse.
@MariaCalfaDePaul
3 жыл бұрын
@@musicalmiscellany cool beans !
@hollydoodle
2 жыл бұрын
Awesome!! Just the idea we were looking for!
@musicalmiscellany
2 жыл бұрын
I'm glad I could help! I always hope these videos are helpful to someone. Thanks for watching.
@AngelaTHesterblessed
3 жыл бұрын
Thank you for sharing this great idea.
@musicalmiscellany
3 жыл бұрын
You're welcome. It's good to hear when my ideas help someone else.
@jack_michener
2 жыл бұрын
The result is satisfying
@musicalmiscellany
2 жыл бұрын
Thanks for watching.
@tommyknowles1895
5 ай бұрын
When playing the guitar it is no longer necessary to sit on the cajon. I just turn it around, use the pedal traditionally and sit on a stool or chair.
@musicalmiscellany
5 ай бұрын
Thanks for checking out the video. I actually mentioned that exact point around 4:07.
@medusaman1
2 жыл бұрын
You could separate the leaves of the hinge, turn one of them around and re-insert the pin back on. That way it will line up better with the bass drum pedal gripper
@musicalmiscellany
2 жыл бұрын
Thanks for watching. You could most definitely do that. In fact, I did think of that during the prototyping process. You are correct that it move the outside portion of the hinge "higher" but then the hinge doesn't sit flat when you fold it back in. If you were planning to use the cajon only with a kick pedal, that would be a good option but if you plan to use it both with and w/o the pedal, you might be happier with the standard format. A couple little pieces of velcro on the hinge and it doesn't rattle or anything. Great suggestion.
@brennonjohn
3 жыл бұрын
Thanks for the video. Informative and entertaining!
@musicalmiscellany
3 жыл бұрын
Thanks for watching and glad you enjoyed it.
@jebadev
2 жыл бұрын
Love the guitar n bass
@musicalmiscellany
2 жыл бұрын
It really is good for that technique. Thanks for watching.
@crazkurtz
2 жыл бұрын
Love the Jurassic park font!
@musicalmiscellany
2 жыл бұрын
I'm glad someone noticed that. Thanks for watching.
@spaceychien
3 жыл бұрын
Brilliant ! thanks for the idea. And your presentation made me laugh too
@musicalmiscellany
3 жыл бұрын
Thanks for watching. I'm glad it was helpful.
@albertlopez2237
Жыл бұрын
Use a foot tambourine on your other foot. You get more dynamics in percussion sound
@musicalmiscellany
Жыл бұрын
Good idea. Thanks for watching the vid.
@tubular167
3 жыл бұрын
Great video...put s shaker on your spare foot for extra spice
@musicalmiscellany
3 жыл бұрын
Thanks for watching and yes... that's a great idea.
@j.l.z.5775
3 жыл бұрын
Hello, thanks for the idea, some colleagues says that drummin is a matter of imagination and creativity... so the sky is the limit when looking for a perfect set up. I made my pedal base with a door hinge like you said, and putted a little velcro to secure it when is not needed and resulted great... do you know how to make a cable driven kick pedal? it would fit more confortable for some people, like me! Greets from Panama.
@musicalmiscellany
3 жыл бұрын
Thanks for watching. I'm not sure how you'd go about making one of those. I know there are a few on the market. I'd assume it's a pretty specialized mechanism. I wonder if you could 3D print one?
@j.l.z.5775
3 жыл бұрын
@@musicalmiscellany Thanks for answering so quickly!, yep, I think this time the better option is to get it on the market.
@SwordCymbal79
3 жыл бұрын
This is 🔥 I hit ya with a subscription!
@musicalmiscellany
3 жыл бұрын
Thanks for that. I make these videos hoping they're helpful to somebody so it's always good to hear when they are.
@AdrumaVictoria16
3 жыл бұрын
use velcro to attach or release
@musicalmiscellany
3 жыл бұрын
That's a good idea. Thanks.
@Yountica
2 жыл бұрын
Another video I saw, recommended using a hinge with internal spring.
@Kubakaiser
3 жыл бұрын
Brilliant!
@musicalmiscellany
3 жыл бұрын
Thanks for watching.
@caeldrums
3 жыл бұрын
I have a cajon drum kit too 😊
@musicalmiscellany
3 жыл бұрын
They are a lot of fun, check out my video here: kzitem.info/news/bejne/roenzKaPn4CEe4I
@willferguson2935
2 жыл бұрын
BRILLIANT
@musicalmiscellany
2 жыл бұрын
Thanks. I'm glad the video was helpful.
@silverliningsvlog1846
3 жыл бұрын
This is very interesting
@musicalmiscellany
3 жыл бұрын
Thanks. It's a simple technique but I think it will work well.
@nolanbeamish3279
2 жыл бұрын
how big is the cajon you are using? what are the dimensions.
@musicalmiscellany
2 жыл бұрын
The cajon is 11.75" x 11.75" x 18". Thanks for watching.
@JordannaBanks
2 жыл бұрын
Was that a 3 inch or a maybe a 3.5 inch hinge?
@musicalmiscellany
2 жыл бұрын
It’s a 3” hinge but I’d imagine either size would work. Thanks for watching.
@JordannaBanks
2 жыл бұрын
@@musicalmiscellany Perfect, thanks!
@stevesstrings5243
3 жыл бұрын
NIce!
@musicalmiscellany
3 жыл бұрын
Thanks Steve. I got a couple more videos coming that will expand on this. **foreshadowing**
@stevesstrings5243
3 жыл бұрын
I look forward to them.
@cowboygeek3315
3 жыл бұрын
LOL - good stuff - stopped by while trying to come back up to speed --- take a quick run by Steve's as well -- will update you when I get back to the "SATSUMA#500" project
@musicalmiscellany
3 жыл бұрын
Thanks for stopping by. I hope you're doing okay.
@jack_michener
2 жыл бұрын
Comes back from guitar center wearing a mask because Covid 19 stinks donkey biscuits.
@musicalmiscellany
2 жыл бұрын
Yeah. This video was posted in Oct fo 2020 which was a time of high awareness for sure. What a frustrating year.
@kleonholiday
2 жыл бұрын
groundbraking.... u screwed your cajon..... my perc heart is crying right now.....
@musicalmiscellany
2 жыл бұрын
Sorry to damage your perc heart but thanks for watching. FWIW, having the hinge on there doesn't bother me.
Пікірлер: 65