Today we're going to be adding a Huskylens to a robot car to give it AI-powered line and object tracking abilities. Huskylens is a standalone sensor with 6 pre-configured recognition algorithms, which enables you to easily add AI-powered vision to your Raspberry Pi and Arduino projects. We're going to be trying out the line and object tracking modes on the robot car which I had previously built for an obstacle avoidance project.
Visit my blog for the full written guide, including the code and 3D print files - www.the-diy-life.com/adding-a...
The Huskylens used in this video was sent to me by DF Robot to share with you, check out their website - www.dfrobot.com/product-1922....
My original ultrasonic sensor robot car project - www.the-diy-life.com/arduino-...
What You Need To Build Your Own Robot Car
Arduino Uno - amzn.to/2OgoMvv
L293D Motor Driver Shield- amzn.to/3fpTzld
Huskylens - amzn.to/2P7MfmD
4 x Geared DC Motors & Wheels - amzn.to/3dAZghI
9-12V Battery Pack
8 x M3 x 15mm Socket Head Screws - amzn.to/2V7vaZ5
Ribbon Cable - amzn.to/340xB3B
The above parts are affiliate links. By purchasing products through the above links, you’ll be supporting this channel, with no additional cost to you.
If you've got any ideas for Raspberry Pi, Arduino, or other Electronics projects or tutorials you'd like to see, let me know in the comments section.
Негізгі бет Тәжірибелік нұсқаулар және стиль Adding AI Vision To A Robot Car Using A Huskylens - Line & Object Tracking
Пікірлер: 80