Nice I managed to get 4 x us5000 ones.. 18kw storage,
@rogereverett9095
Жыл бұрын
actually, your night quite right. you need to attach the come cables as well, then all the BMs will talk to each other. If you have batteryview connected on console then you will see the batteries balancing and talking to each other. Once balanced they will display as idle in the app
@cooljim2009
Жыл бұрын
Thankyou for this very informative video. I have the same us3000c batteries. Two but bought a third. Connected them up in the same way but left the inverter Power +/- cables and rs485 (for some reason installers used rs485 rather than CAN) disconnected. The two current batteries where at 100%. I then pressed the SW switch on the master in order to balance. Lights all flashed in same way but left over night. In the morning all the LED ights where out except the RUN LED light was flashing alternatiing between each battery. Does this mean the balacing performed correctly? Wan't sure if all the SOC lights should then be all lit the same level. I then turned the batteries off, reconnected the power cables from the inverter + to master, - to Last slave and the rs485. Turned the Isolator switch on but then the inverter asks if I want to add a battery. So is it just a question of re-entering the settings?
@garysmith5858
2 жыл бұрын
Which invertor do you have? And are you able to fill all four batteries on the 4hr 5p window?
@Luke2706
2 жыл бұрын
Yes, manage to fill them up. Inverter is luxpower
@aardvarkinnit2863
2 жыл бұрын
@@Luke2706 how do you get your inverter to charge from the mains? I also have a Lux one.
@philiploizides4366
Жыл бұрын
Hi, did you ever resolve the issue where the lux portal does not tell you how many kWh of storage you have? I have just added a battery and all seems fine apart from me not being able to see the total kwh of storage
@tencor000
2 жыл бұрын
Hi, do you know how to add a battery to a high voltage system using paylontech X1 setup?
@mollyfilms
2 жыл бұрын
Hi there this is really valuable info. I also have two batteries and want to add in another two. Did you get any issues after the new install? Did you have to let the controller know there was now more capacity?
@VRHERE
2 жыл бұрын
nope, nothing, super easy - you just plug the ethernet cables and power cables and everything just works. But sadly the lux power portal does not tell you explicitly how many kWh of storage you have so you have to work that out of how many kWh where discharged from batteries on that day.
@TheRealAnthony_real
2 жыл бұрын
Are you using these to charge them at night and discharge them during the day ? I was planning to do something similar however I need approx. 20 kWh worth of baterries .. what inverter are you using ? What would you recommend ? These are AC batteries basically ..
@TheRealAnthony_real
2 жыл бұрын
and my concern is that I need a proper inverter to be able to charge 20 kWh at night in 4 hrs time frame ..
@joc1976
2 жыл бұрын
What inverter used
@Luke2706
2 жыл бұрын
Luxpower
@siralexis91
2 жыл бұрын
Hi Les, do you had some situation where the battery array went to alarm mode when connected to the inverter?
@Luke2706
2 жыл бұрын
No
@drsolar
2 жыл бұрын
You did not connect the com cable between the batteries
@helmuteberhart4472
2 жыл бұрын
That is exactly what I was wondering about too......
@drsolar
2 жыл бұрын
@@helmuteberhart4472 great minds they say that, think alike.
Пікірлер: 21