Thank you for showing me because i just bought one.
@yllib2012
6 жыл бұрын
I shop on Aliexpress all the time and have seen these but I never really understood what they were for. Thanks to your excellent video instructions I just ordered a couple. To say this is a "must have item" is an understatement. I can't hardly wait to get one and use it. No more measuring and matching up mated pairs. Thank you Sir for sharing, this is some great information.If not for your video I probably would have never bought one. Cutting bands has always been one of my least favorite things to do but that is sure to change soon.
@ricardoortizcampos3089
Жыл бұрын
Y como se llama ese aparato para cortar liga plana?
@iwontbebeat7111
2 жыл бұрын
Complete explanation , executed perfect example An Great review. 👍 Now I know what I'm going to get. Thank you
@moiecol
Жыл бұрын
I bought mine on Amazon for $8.99 Works perfectly, just cut once and flip it end for end. That's it 👍
@josephschmoberg6778
6 жыл бұрын
Saw this video and just bought one !
@eagleeyeviewimages
4 жыл бұрын
Your new subscriber 👍 Nice video. I just got into catapults
@tamm1796
5 жыл бұрын
Got mine from ebay today. Very handy bit of kit.
@joeblogs7642
6 жыл бұрын
I was looking at this on Ali but was put off by the sketchy video. Looks just the job though. Good video 🖒✌ (Phip 😀)
@specteams1slingshots21
6 жыл бұрын
Believe I’ll have a go with one. 👍
@namodio12
4 жыл бұрын
I just ordered this from GZK!
@MangaGamified
2 жыл бұрын
It maybe the perfect tool for others, but I get anxiety it having to adjust it yourself
@swillshere
6 жыл бұрын
Nice bit of kit hmmm.
@Zerpersande
Жыл бұрын
What do you think about using a set of calipers to accurately adjust the ruler at each end point?
@kenmcf
3 жыл бұрын
If i loosen the nuts up enough for the clear part to slide easily, the bolts fall out or can get lost.
@phdyoutubedegree1939
2 жыл бұрын
I suggest you have a 60mm rotary cutter. Anything smaller you will not be able to cut anything with that large edge on the ruler.
@SensitivityIsland
Жыл бұрын
Yup just had a cut a bit of my olfa 45mm central bolt thing.
@michkanm
5 жыл бұрын
First you need to cut one small piece taper 3mm to 0mm to begin and than to use ruler like you did. If you don't do that you will have your bands tapered 6 mm from one side instead of 3mm taper from both sides.
@romanycustomcatapults
5 жыл бұрын
michkanm that makes no difference to how bands perform
@aannddyychang6162
3 жыл бұрын
@@romanycustomcatapults hello, I wants to get one ruler like this. However, wouldn't that 1st band have a straight edge?
@romanycustomcatapults
3 жыл бұрын
@@aannddyychang6162 it would yes, but in my experience it makes no difference to accuracy, if it bothers you though it’s easily remedied
@doshens
4 жыл бұрын
Could you please tell me for what kind of knifes is it? My OLFA 45 mm is not able to cut bands. The edge of the ruler doesn't let the knife to reach the band.
@RHYNO1994
3 ай бұрын
Is it still accurate if you double up on material?
@romanycustomcatapults
2 ай бұрын
I’ve not tried doubling to be honest
@aiman9652
2 жыл бұрын
Roller cutter 60mm right?
@Blackscoutwinter
5 жыл бұрын
i paged through their site under rulers and rotory fabric accessories. cant find that tool. whats it actually called?
@edwardgomez3633
2 жыл бұрын
Do you flip your elastic around each time you cut?
@yllib2012
6 жыл бұрын
Now available from Amazon in the USA and in he UK.Current Amazon USA link: www.amazon.com/GM-BW-Slingshot-Replacement-Competition/dp/B07DV8KG5Z/ref=cm_wl_huc_itemI think sold out for now in the UK but they will have them again.No I am NOT the seller and have no affiliation with the seller.If you are in the USA and want it FAST get one while you can. I expect a fast sellout.
@ATOMark
4 жыл бұрын
Hey brother I have just started making my own bands. I got some .62mm orange bands from gzk with my hammer pro. I would like to shoot 8mm ammo. What would you suggest as a starting taper?
@romanycustomcatapults
4 жыл бұрын
ATO try an 18/12mm
@ATOMark
4 жыл бұрын
@@romanycustomcatapults it's in the works brother. Thanks for the reply. 🇨🇦🥓🍻
@tripwire0000
6 жыл бұрын
Wish I new where to buy one.
@user-nt3fw8ur6i
6 ай бұрын
Hello, what is the name of this cutting ruler?
@jhonisestilingueesportivof3823
2 жыл бұрын
what are the dimensions for butterfly shooting and tape thickness thank you friend
@briggsy3155
Жыл бұрын
If you lay 2 sheets of band down and cut both bands at the same time you will have perfect matching pair of bands
@romanycustomcatapults
Жыл бұрын
I know
@kitasaunders
3 жыл бұрын
Wouldn't that 1st band have a straight edge
@Bob_Lablaw
3 жыл бұрын
Exactly what I was wondering
@phdyoutubedegree1939
2 жыл бұрын
Yes, and can just be cut again to remedy it.
@Jackson.T
Жыл бұрын
On a fresh piece of rubber with a straight edge is there a way to taper the edge properly?
@romanycustomcatapults
Жыл бұрын
Yeah just taper to half of what your band raper is, so say if your taper is a 6mm drop then cut the edge of at a degree of 3mm
@thcj3593
6 жыл бұрын
sorry Falscher Link www.aliexpress.com/item/Slingshot-1pcs-auxiliary-Cutting-flat-rubber-band-universal-ruler-Catapult-Accessories-Outdoors-Slingshot-New-hunting-tools/32846664635.html?spm=a2g0s.9042311.0.0.Ip5FBu
@RichardHillis1950
6 жыл бұрын
Great product thanks for the video, I ordered and received same. Can you please tell me what rotary cutter you use! I find the olfa 45mm cutting depth doesn't give enough clearance when using the ruler jig Regards Richard
@thcj3593
6 жыл бұрын
A cheaper .... What's up ... turn the screws over ;-) So, turn the screw out and put it in the other way. ;-) If necessary, here's something round the round cover abschleifen .... but then actually. Greetings from Germany
@WV591
2 жыл бұрын
Monkey can use it. Great for some of the lads in catapult community. lol
@paullinnell
Жыл бұрын
Model ?? Ordering info please?
@abc-iq9fk
4 жыл бұрын
Hi, what's the diameter of your rotary blade, 45 or 60mm ? Thanks.
@romanycustomcatapults
4 жыл бұрын
abc123 60mm but I have a 40mm aswel, I prefer 60mm though
@abc-iq9fk
4 жыл бұрын
@@romanycustomcatapults I'll buy a 60mm then, thank you. ;)
@thcj3593
6 жыл бұрын
self made Grüße aus Germany kzitem.info/news/bejne/1YihqXWGbaqrdI4 ;-)
@mrp4754
6 ай бұрын
You rabbit on and make no sense.
@romanycustomcatapults
6 ай бұрын
Thank you for the feed back, it’s appreciated, merry Christmas and have a great new year mr p
Пікірлер: 53