Oh man. I need to adjust my bg86. Mines boggy on initial throttle pull. Thanks for explaining and demonstrating what the low and high adjusters do. Awesome video.
@douglacey5733
3 жыл бұрын
Thank very much
@dukemarlar1740
Жыл бұрын
Just got one from my father in law. Run great now. Thanks to you. ^^
@jp-us9rq
3 жыл бұрын
I got my bg56 2 days ago it's awesome
@leadnsteel1428
5 ай бұрын
Yeah it's pretty decent for a hand blower. I like to run Echo power blend oil the carbon buildup is almost very little.
@jackle842000
5 ай бұрын
I feel like this model doesn't blow near hard enough.
@jackle842000
5 ай бұрын
Feel like this model doesn't blow hard enough.
@leadnsteel1428
5 ай бұрын
@@jackle842000 that's what he said 😆 but I found it had a lot more power with the Echo oil. Red armor and power blend are both great even my trimmers run better.
@krehbein
2 жыл бұрын
Thanks for sharing, hope these tips help me fix my stihl. Same as you have.
@Nutrilik
5 ай бұрын
Great video 🤜🏼🤛🏼
@glennzook3042
6 ай бұрын
Thanks for sharing
@ozmalo
2 жыл бұрын
NICE VID HELPFUL THANKS
@leroyhall8530
5 ай бұрын
My high and low speed adjusters are not Philips head it looks like a nut adjustment what tool do I need only my idle adjustment is a Phillips screw can I order it somewhere or just go to a Stihl dealer
@HorsepowerHouse20
5 ай бұрын
I saw many specialty screwdrivers for these carburetors. Unfortunately, I could not find the exact tool you speak of. I found some that were CLOSE, but not quite. 🤷
@alexmonk5819
5 ай бұрын
I’m having the same problem trying to find the tool to adjust these L & H Carburetor screws on a HS56 hedge trimmer. Mine also isn’t a Philips or flat head screw slot, I need something like a socket. Not sure if hex or what size. Feel like stihl have purposely made it difficult to perform a simple carb adjustment.
@Joaquin_Ak
3 ай бұрын
I'm with the same issue. It's like a hexagonal prism, but doesn't have the space for a common tube
@HorsepowerHouse20
3 ай бұрын
Stihl changed it often.
@Joaquin_Ak
3 ай бұрын
I change the carburetor, the new one has for common screwdriver
@renostubbs8504
2 жыл бұрын
Thanks a million, sir, excellent video
@michaelb7280
6 ай бұрын
High speed adjustment screw was key : )
@torque6389
3 жыл бұрын
Cool! Thank you for this!
@HorsepowerHouse20
3 жыл бұрын
We have other How-To's and DIY videos on our channels. Check it out.
@applianceman6009
2 ай бұрын
What about the LA adjustment. I turned that and the low adjustment, and I don’t know how to get it perfect. High adjustment is normal, but it floods when I try to start it, and it runs terrible.
@HorsepowerHouse20
Ай бұрын
if it has always run poorly, you have bigger issues than some "adjustment". Sorry, bud.
@blenderbenderguy
3 жыл бұрын
Thanks, but I just replaced mine with new carb and I can't get it started. It was running poorly prior. What are the initial screw settings so that I can get it to run? I obviously can't warm it up to set the jets if it won't start to begin with.
@HorsepowerHouse20
3 жыл бұрын
Did you check compression of the cylinder? These tiny engines don't live forever.
@HorsepowerHouse20
3 жыл бұрын
Need compression and vibrant spark. So, check both of those. If yours is older though, it might be time to move on to a new one. They don't last forever.
@blenderbenderguy
3 жыл бұрын
@@HorsepowerHouse20 Had compression and spark prior to changing out carb. It started but ran funky and I figured a carb change might be a cheap quick fix.
@HorsepowerHouse20
3 жыл бұрын
@blenderbender The "starting to run funky" could be the motor is done, or spark plug, or coil, or plug wire, defective kill-switch, could be any number of things. Did you CHECK for compression and spark? My guess is no. These things rarely give warning. They just go when they decide to. Like I said, these little engines don't last forever. If it has alot of time on it - it's probably done.
@blenderbenderguy
3 жыл бұрын
@@HorsepowerHouse20 Thanks.... I'll look into it further.
@clemsonrugger
Жыл бұрын
You didn't show removing the limiter caps. Can't do adjustment till those are removed
@HorsepowerHouse20
Жыл бұрын
Because mine has none. never did. Bought it brand new as you see.
@clemsonrugger
Жыл бұрын
@@HorsepowerHouse20 I examined mine. The 'limiter' caps are now part of the carb body. Crap. It takes an octagonal socket.
@HorsepowerHouse20
Жыл бұрын
you can get it on Amazon.
@sturdybutter
Жыл бұрын
@@clemsonruggeryup. They make it a super thin walled socket. I assumed the 4mm one I got from Stihl to adjust the same style carburetor screws on my FS56 would work. It doesn’t. It seems to be either a 5 or 6mm thin walled socket.
@Freddie99
7 ай бұрын
Is that half turn from being all the way in so open half turn?
@donflash1128
2 жыл бұрын
I have a SH 86C. A Phillips doesn’t work. Do you know what screwdriver will fit? Thanks
@HorsepowerHouse20
2 жыл бұрын
Works on mine. As shown in the video.
@robwerner5559
2 жыл бұрын
@@HorsepowerHouse20 I took the cover off mine and no phillips only phillips down the bottom
@sturdybutter
Жыл бұрын
@@robwerner5559the newer models have a thin walled socket you need to adjust the screws. It’s really frustrating.
@donflash1128
2 жыл бұрын
I have the SH 86C and it doesn’t rev very fast. Weaker than my battery powered blower.
@HorsepowerHouse20
2 жыл бұрын
Tune it up and service it then. Very easy.
@rannz8
2 жыл бұрын
Check spark arrestor it may be clogged with carbon
@fartingnipple
3 жыл бұрын
Very helpful, thanks bro
@brp333
2 жыл бұрын
About how many turns out are your screws so I have a reference place to start?
@HorsepowerHouse20
2 жыл бұрын
It only has 1 turn. Set it to when it runs right.
@sundown798
Жыл бұрын
@HorsepowerHouse20 I think he means an actual reference point it will actually "start" from. I just bought a new carb so I have that same question. Ty.
@donflash1128
2 жыл бұрын
I have a new one and it runs badly..
@HorsepowerHouse20
2 жыл бұрын
Take it back to the store.
@aceallenk
3 ай бұрын
I bought a BG56 May 2024 and has a hex adjustment so purchased the 12 piece carb adjustment screwdriver set from Amazon and the 4M Hex that comes with that set will not work. The 4M Hex is correct as I referenced it with an 4M Alan wrench. You cannot purchase the wrench through Stihl so Im ordering a 6M deep socket from Amazon and will gring the wall thin to see if that fits.
@aceallenk
3 ай бұрын
I just found the Pac Man screwdrive works from the Amazon set. Its not the right screwdrive but it works. The 4M hex doesn't work, nor does the splined or the star screwdrivers. But the larger PacMan screwdriver will work.
Пікірлер: 52