For the Flex A on BRZ, there are only 16 usable clicks starting from full clockwise. Using anything beyond that is unusable and they say can damage it.
@804MRMAN
Жыл бұрын
*I still think Tein has it wrong. Because on their 16-way adjustment ( it's actually 64 if you installed EDFC ), they say click 16 clockwise. If you don't know where it's already at, it keeps going past 16. So I go full counterclockwise until it stops, then adjust clockwise to find proper damping*
@kamdag8457
16 күн бұрын
У меня 27 щелчков 😢
@LudeProductions
8 күн бұрын
how do you know when it’s back in the middle of the setting. Like back to when they ship it out
@projectdream6451
4 ай бұрын
I thought when you go past 16 clicks those are dead clicks. Correct me if Im wrong Im struggling to understand these coils..
@MYRAS12345
Жыл бұрын
how do you adjust them in the back on the lancer? can u reach them without putting them off?
@dominicanboyz
2 ай бұрын
I have coilover but it does not have that Turn the button ,, How do i soft my spring
@804MRMAN
20 күн бұрын
Get some adjustable coilovers 😂
@JorgeGomez-li5gb
2 ай бұрын
Tien flex z is only 16 way adjustment
@hakimdurand8427
20 күн бұрын
why doesnt mine have that black cover...
@matthewfowler9526
2 жыл бұрын
Does the adj stop at max?
@Muklolan666
7 ай бұрын
Does it make sense that, on one side I have 30 clicks, and the other I have 32??🤔🤔 I've counted it multiple times...
@MohdYassin-iu7ii
6 ай бұрын
that's strange
@pannits
3 ай бұрын
Same to me.
@jeanadames8230
9 ай бұрын
I’m a newbie to coilovers and I’m really thinking of buying a pair but since mi car is for daily I just need to know how is the comfort front a coil to the factory shocks? Is it really bumpy or can be adjust to ride like the factory?
@804MRMAN
20 күн бұрын
Your factory shocks are probably around on the HIGH end 6k front 4k rear with a longer stroke travel. Adjustable Coilovers usually shorten the travel by about 1 inch with a higher spring rate say around 9k front 6-7k rear.
@josephseed8965
2 жыл бұрын
Is it the same for the back struts and if so how do I access them on a 350z
@Hellboy_
11 ай бұрын
You jus put the little plastic in the trunk come extend to that gooofy bar with the z on it
@joesantos7196
Жыл бұрын
I'm a newbie to coilovers here. Does it need to get alignment when you do this adjustment?
@joshleyva5544
Жыл бұрын
What he’s showing is called dampening adjustment (ride comfort) Since all this adjustment does is let more or less fluid flow through the shock internally, there’s no need to get an alignment
@joesantos7196
Жыл бұрын
@@joshleyva5544 thanks sir
@michaeljfuzz
Жыл бұрын
@@joesantos7196 once you install them (coilovers or any new shocks\, if they aren't already installed then you would need an alignment. But Not if you are only adjusting dampening, as was clarified by the above reply.
@joesantos7196
Жыл бұрын
@@michaeljfuzz yes thank you
@porterdallenbach1639
Жыл бұрын
*damping. Not "dempering" or "dampening"
@Sharakomusic
8 ай бұрын
Its 16 either way from the middle..😅
@kemp2975
11 ай бұрын
Hi! on rear shocks possible set adjusting ? on this flex z for lancer/ralliart?
@kamdag8457
16 күн бұрын
Да возможно
@officialyungtwizted3858
10 ай бұрын
I goy max peeding with damping.. 24 clicks... i want a smooth ride its my daily what should i put it too??
@gsrjaycee4521
8 ай бұрын
On my rev 9 coilovers I have them set at full soft and 10 clicks to the right they are nice on 32 way dampening.I'm still tunning them and testing tho I noticed my car has better launch and turning capabilities when fully tight 07 TL type s
@MohdYassin-iu7ii
6 ай бұрын
@@gsrjaycee4521i suggest to install edfc and adjust them while driving.
@804MRMAN
4 ай бұрын
@@MohdYassin-iu7iiEDFC is only for TEIN. But hey, you never know theoretically it should work on other coilovers hmmm 🤔
Пікірлер: 34