thanks for being rare and doing the install and test drive in one video
@StovallsGarage
Ай бұрын
@@1000kingzz I try, I honestly can't stand multi part videos.
@donellmecca.booker5969
3 күн бұрын
i just got one, installed a sprung disc on my talon. thanks for the review it pushed me over the edge to buy. so far so good . was alittle tight until i put it on the ground and started it in first with clutch in. when people say all china parts are crap i say u know they race cars in china too. and most mid size parts companies have there stuff made in china. they got all the tech we do if not more.. my two cents
@mazdaspeed2116
4 ай бұрын
Love the content bro. Another fan here from NZ
@jyt3408
13 күн бұрын
The hydraulic throwout bearing would help with drivability.
@gatchaponkei
4 ай бұрын
Dude this build is badass
@StovallsGarage
3 ай бұрын
Thanks
@MrJermbob
5 ай бұрын
You wont regret the twin (China or not). I love rattling at the lights with mine and the cool squeaks on engagement. Just have to rev match those down shifts huh. Max love from New Zealand my bro. Thanks for the video.
@MrJermbob
5 ай бұрын
Your also correct my 600hp speced tilton is a 6 legged unit. Twin discs do last a while unless your slipping the hell out of them. Ive had mine for around 8000kms of 5-600hp driving and it looks brand new.
@warrendegonzague
4 ай бұрын
I'd love it if my Mazda/Ford project could be even half of what this car is
@howardhutchinson
4 ай бұрын
Permatex ORANGE.... Strong as red, but easy to remove as blue
@miked820
4 ай бұрын
Nothing wrong as long as it holds up!
@johnmoore7902
4 ай бұрын
Update on the performance and reliability?
@StovallsGarage
3 ай бұрын
Still going strong, just posted a track video
@streetlegalbuilds7644
4 ай бұрын
you need some tracer headlights and a different grill to match that bumper tho. looking good!
@raheempatterson7052
3 ай бұрын
i am gonna try adlerspeed twin disk on my dsm project ...
@gbracing33
4 ай бұрын
Nice upgrade
@StovallsGarage
4 ай бұрын
You ready for your redemption run ?
@gbracing33
4 ай бұрын
@StovallsGarage oh man....I don't think I remember how to drive a stick lol???
@StovallsGarage
4 ай бұрын
@@gbracing33 it's like riding a bike.
@TheBaconAgent212
Ай бұрын
Thanks for the review Did you need to install a pedal stop for this clutch
@StovallsGarage
Ай бұрын
I did not, it didn't seem necessary with my setup
@wickedsatan1
4 ай бұрын
When to expect a track usage review? Is there a break in period?
@StovallsGarage
3 ай бұрын
Just posted video, they say 500 miles, But I think a couple of hard launches would probably be enough.
@beau9765
3 ай бұрын
a relic from the golden era, broke the door handles yet?
@StovallsGarage
3 ай бұрын
Not yet, they seem to be in good shape.
@motorsandmayhem1020
4 ай бұрын
Ive just ordered there triple plate for my s14. Hopefully it takes some abuse 🤣
@StovallsGarage
4 ай бұрын
So far on the street its taking a beating, hopefully I'll get to the track this week.
@yaadbuilt2162
4 ай бұрын
I have that clutch in my e36 m3 great clutch….the car is making 720hp 580tq and it seems a lot of abuse, lot of launching
@tunedbykobi
4 ай бұрын
How is the drivability street wise ? have this clutch for my e36 haven't installed it yet.
@StovallsGarage
3 ай бұрын
Takes some getting used to. But fairly streetable.
@johnduong3203
3 ай бұрын
Nice work! Hey where did you get the switches from they look great!
@StovallsGarage
3 ай бұрын
They're Fuel tech.
@anthonyhornback1390
2 ай бұрын
How did it hold up?
@StovallsGarage
Ай бұрын
@@anthonyhornback1390 Holding so far
@delatuned
4 ай бұрын
Just send the act to get drilled and slotted 🤣🤣🤣
@StovallsGarage
4 ай бұрын
😄😄
@marcushightower9250
4 ай бұрын
Why are there blades of death in the clutch?
@gc2353
16 күн бұрын
Did you use the throw out bearing that came with it ?
@StovallsGarage
16 күн бұрын
@gc2353 nope, wasn't compatible with the fork, and didn't fit around the input shaft.
@gc2353
16 күн бұрын
You used a factory oem spec throw out bearing and it worked just fine or did you need to modify anything ? Cause the the throw out bearing that comes with the twin clutch is much thicker . So just wondering about the spacing
@StovallsGarage
16 күн бұрын
@gc2353 i checked spacing and release, everything seemed to checkout.
@delatuned
4 ай бұрын
👀
@kevinbarker1475
28 күн бұрын
How is clutch hold up?
@StovallsGarage
27 күн бұрын
Not too sure at the moment, I might have broke it, I need to pull the car apart to be sure, I had a valve cover leak and I think I got oil all over it.
@kevinbarker1475
27 күн бұрын
That sux man . Hope you work through it. God speed!
@gc2353
4 ай бұрын
Been couple weeks how’s is holding up now . Tracked it up the twin yet
@StovallsGarage
4 ай бұрын
Went to the track last night, had some boost control issues, but the clutch seems to be holding great.
@gc2353
3 ай бұрын
It still holding update ?
@georgeschawa3359
3 ай бұрын
Any update?
@StovallsGarage
3 ай бұрын
Posted one last night
@Coldology
3 ай бұрын
Recommend for k series ?
@StovallsGarage
Ай бұрын
@@Coldology i don't have any complaints yet, but I don't have any experience with Ks or honda in general.
@vinny6_9
3 ай бұрын
what are you using for you pcv baffle setup? are you just blocking it off and venting off the valve cover?
@StovallsGarage
3 ай бұрын
Yes , catch can vented to atmo.
@vinny6_9
3 ай бұрын
@@StovallsGarage interesting. No issues at all with that setup?
@StovallsGarage
Ай бұрын
@@vinny6_9 none, other than people think Im burning oil lol.
@vinny6_9
Ай бұрын
@@StovallsGarage lol good to know. I'm weary of having those gases travel all the way to the valve cover vs exiting out the block, but thanks for reassurance!
Пікірлер: 62