This is cubesuite's advanced custom simple teaching Later, we will also show the teaching of cube suite and effector and various display videos Company homepage: www.cuvave.com
THANK YOU~ cant believe it's this affordable for such a versitile device!
@EhrosmithTV
2 жыл бұрын
Hello, I have an in-depth tutorial video of the M-Vave Chocolate. You'll know more on this product if you watch it. Enjoy!!
@victorfideliss
9 ай бұрын
Hey! Do you have it for line 6 m5? I want to click some effects (on\off) with the same swtich to make it like individual pedals. Thank you very much!
@titojunior73
8 ай бұрын
Chocolate is a fantastic controller but please do an upgrade in cubesuite for save the presets 🙏
@PabloSilva-nz1su
7 ай бұрын
Is it possible to connect 2 Midi controllers via bluetooth? I use one on my iPad with Bias fx 2, I wanted to connect another one
@piotrb7934
8 ай бұрын
How can I increase the wireless range of the Chocolate Switch? 3-4 meters from the computer, the connection often drops. The same is true if I use a MidiB USB receiver - at this time I compared MidiA, the range is three times better. I think the problem is in the iron casing.
@pauldablue
Жыл бұрын
- Hi I just recieved the chocolate from Amazon, I have the Cubesuite installed on Windows and Android, on Windows the settings for Program change A are greyed out, but the advanced custom mode settings are not greyed out. I was able to connect with cubesuite on android and I just want to use Program change A to change patterns on my Retrokits RK-008 which has BLE Midi, all the settings are correct, the RK-008 BLE settings are on set to IN I.e to recieve midi Bluetooth but the RK-008 does not see the Chocolate controller and the blue light continues to flash, is your controller not compatible with BLE ?
@johnlestercalumba7455
2 ай бұрын
hi @m-vave is it compatible with peavey vyper 75? the amp has a built in preset for bank a to c, and 4 preset for each bank
@M-VAVE
2 ай бұрын
Does it have MIDI?
@jayvsson
Жыл бұрын
Very cool, I have a quick question. My MX5 Headrush Multieffects pedal has a looper in it. The looper has it's own CC #'s (example 79 is for start/stop loop - momentary switch). Where do I program that CC # in the M-Vave to match the CC in my headrush? Is it the CC section in advanced settings and in the data 1 section put 79? Or is there another CC section that I am missing in the M-vave that can do this? Thanks!
@M-VAVE
Жыл бұрын
Common customization can be tried, and there are different modes in advanced customization. In addition to short press, there is also the effect of stepping down and loosening to achieve instantaneous switch. It is also available in general customization.
@jayvsson
Жыл бұрын
@@M-VAVE Okay thank you for that info - def helps :) Can I customize more than 4 CC #'s than just the 4 (A, B, C, D) footswitches on the chocolate Midi controller? For example, could I move up a bank and get 4 more assignable CC' for A,B,C,D? How many can I assign total and what section do I do this in? Thanks!
@M-VAVE
Жыл бұрын
If there are more than four, you can only select two CC codes in advanced customization, namely, lift and drop, or short press and long press. There are eight CC codes in total.
@bobtomlinson3833
Жыл бұрын
@@M-VAVE being able to use more than 1 bank in advanced custom mode would really open up this pedal and make it much more usable. Hopefully it's something you'll be able to implement.
@M-VAVE
Жыл бұрын
@@bobtomlinson3833 Thank you for your suggestion. We have learned about this before, but because we have optimized this product to almost no storage space, so if you want to achieve this function, you can only use more powerful hardware to achieve this function. Thank you again for your suggestions.
@hannchung6091
Жыл бұрын
Hi M-Vave , it is possible connect to BOSS pocket GT ?
@mjmpraiseshops
Жыл бұрын
Hi! Here in Brazil we need a video explaining how to configure it together with the Hotone Ampero Stomp 2. We are very needy in this regard.
@M-VAVE
Жыл бұрын
Join m-vave chocolate in Facebook. There will be different users who use the corresponding products. Because we are an official channel, we cannot use the products of other companies for shooting without the authorization of other companies.
@theviolinoob
Жыл бұрын
what is the connector "PEDAL" stands for? it accepts an expression pedal? ou another switch pedal?
@M-VAVE
Жыл бұрын
External pedals such as facial expression pedals are OK
@alessioromeo4210
2 жыл бұрын
Hi, may I use it in win 10 PC with Ableton live, by associating each button to a midi control in the Ableton interface or in Vst's? My pc doesnt have bluetooth. Thanks a lot
@M-VAVE
2 жыл бұрын
For the computer, use the type-C port and usb-midi. The computer software also has cubesuite for advanced customization. The premise is that you should use OTA to upgrade the cubesuite on the mobile phone and upgrade the firmware version to the highest level, so that the cubesuite on the computer will not report an error.
@EhrosmithTV
2 жыл бұрын
Hello, I have an in-depth tutorial video of the M-Vave Chocolate. You'll know more on this product if you watch it. Enjoy!!
@ermanfmd2441
2 жыл бұрын
what are the jack function is it can be use using trs cable to control switches?
@M-VAVE
2 жыл бұрын
I dont what your means Please describe your problem in detail and send it to this email support@m-vave.com
@leandrobeninca
2 жыл бұрын
Hi! Can I map the switches as the arrow keys of a keyboard, to use on iOS? I want to use Chocolare as a page switcher in my teleprompter app. Thanks!!
@M-VAVE
2 жыл бұрын
This is OK. In the new keyboard mode of cubesuite, the four key positions of chocolate can be set as some shortcut keys of the keyboard. Including its own preset keyboard mode a, which is up, down, left and right, and then you can also modify the key position you want in the keyboard mode customization. For details, you can refer to another video, the video of the new function of cubesuite
@nickchristie2221
2 жыл бұрын
@@M-VAVE currently the key selections are quite limited. Are there any plans to extend the options of what keys are available? i.e. function keys and modifiers e.g ctrl +F9.
@M-VAVE
2 жыл бұрын
@@nickchristie2221 At present, we are mainly involved in the use of shortcut keys of some recording software, and we will not update this aspect for the time being.
@antonybisogno3668
2 жыл бұрын
I need to use it with Gelabs from Mooer
@mustaniac
10 ай бұрын
Does that pedal recieve midi data using trs midi? I found this pedal is awesome!
@M-VAVE
10 ай бұрын
The TRS one is the MIDI out.
@user-yn6qf6ff2z
9 ай бұрын
Why "Program Change C" only sends 0(-) data instead 127(+)??? I need C preset with 127... or how to use Advanced custom mode with more than 8 actions? (4 foot switch x 4AB banks). Or how to assign or edit "Program Change C" Data2 Values?
@M-VAVE
9 ай бұрын
At present, this product cannot perform more than 8 advanced customization edits. Only new products can meet your needs in the future.
@uchuyvo5963
2 жыл бұрын
Hi @M-VAVE. I love it but how to calibration pedal?
@M-VAVE
2 жыл бұрын
I don't know what you want to do. You can take a video and send it to support@M -VAVE. com
@offwego6907
3 ай бұрын
Can I connect 2 pedals? One via BT and one via TRS? For example I would like to control Line 6 M5 simultaneously with Tank G
@douglassantos7849
2 жыл бұрын
Olá @m-vave! Estou com dificuldade de usar o controlador Chocolate com minha multi efeitos Ampero 2 stomp.. Conecto o Ms1 no midi in out e pareio com o chocolate, porém nada acontece em nenhum dos modos do app CubeSuite.. poderiam me ajudar?
@M-VAVE
2 жыл бұрын
Você tem um iPhone ou tablet? Existe um software chamado MIDI wrap. Você pode conectar o tablet diretamente com MIDI a e, em seguida, pressionar o effector para enviar o código para ver qual é o código no effector e, em seguida, definir o código correspondente no cubesuite para controlá-lo.
@ac_arte
Жыл бұрын
Hi, In this "advanced custom mode", what the + simbol or add means in each switchfoot?
@M-VAVE
Жыл бұрын
This means sending different midi codes through different modes, such as short press, long press, etc., such as PC code, CC code, NOTE ON OR NOTE OFF, and sysex.
@ezraezra3130
2 жыл бұрын
My expression pedal works in reverse. Is there a way to set it up in CubeSuite?
@Clive007
Жыл бұрын
Reverse the tip and ring on the cable
@uaibeats
2 жыл бұрын
How many banks they have for program changes? And in control changes?
@EhrosmithTV
2 жыл бұрын
There are 8 banks/groups. The banks are called groups in the MVave. Then each group there are 4 presets. Thats 32 preset in total..this is if you set the Chocolate to Program Change A in cube suite app.. You can also use, program change B. Thats presets scroll from preset 1 to 128. I have an in-depth demo on the M-Vave Wireless System. You may want to check it on my channel. I discussed the Overview, Cube Suite app configuration and connection sequence, and the step by step process on how to use it. Im sure it will clear things up for you. Enjoy.
@mehmetcemsolak4580
Жыл бұрын
Hi guys My 5 M-Vave chocolate devices are on “custom keyboard mode” through Cube Suite app. However, once I want to change them into “custom control” mode for my different needs I can do that via Cube Suite however when I close the M-Vave Devices the changes were not saved at all. And devices still re-opened in “custom keyboard mode”. Is there any way to fix that problem reset M-Vave devices etc.? I really need to use them in custom control mode. Many thanks Cem
@M-VAVE
Жыл бұрын
You sent an email to support@sincoaudio.com
@luanpereira9982
2 жыл бұрын
Do you know if this can be used with guitar rig 6?
@M-VAVE
2 жыл бұрын
What version are you talking about, windows? You can refer to our other video, which has the settings about connecting windows and windows computer software.
@MrChickenking44
Жыл бұрын
How many commands can you add in a foot switch? I see there is a + symbol is there a limit?
@M-VAVE
Жыл бұрын
Do you mean advanced customization. There are a total of 16 groups.
@francisco5579
7 ай бұрын
COMO PUEDO HACER PARA QUE DISCAPARE SEÑAL DE MIDI CLOCK PARA USAR COMO TAP TEMPO EN UN HEADRUSH MX5
@antonybisogno3668
2 жыл бұрын
Hi M-vave, my controller seams doesn't communicate with midi learn on iphone. Only the first time i connected it worked, now the amp sims on my iphone don't receive signal, even in manifacturer control. do you have some ideas? Is there a way to hard reset the controller? maybe it will work! Thanks
@M-VAVE
2 жыл бұрын
Hi antony,Thanks for your question,First, you need to download a cubesuite, then connect your mobile device to the Bluetooth of the controller, and then you open gelabs. There is a pedal control in the MIDI setting, and then some CC codes will be written in it. Then you go to the advanced user-defined mode in cubesuite and select the corresponding mode in each button. You can step long or short, and enter the corresponding CC code in gelabs, You can achieve the role of control. If you don't understand how to operate, please contact our email support@M -Vave.com send us an email and indicate your identity. We will shoot a simple video to tell you how to operate. Thank you again. I wish you a happy life and happy use of the product
@MikeyAfterDark
Жыл бұрын
@@M-VAVE Im suffering from the same issues. I want to use my Ipad as an additional source for sound through Koala Sampler nothing seems to work. I tried your email but there is no help.
@MikeyAfterDark
Жыл бұрын
any luck with pairing an using the M-Vave? I'm trying to use it as a controller for Koala sampler but I've had very little success
@faniistifani9735
2 жыл бұрын
I am using zoom ms50g how to setup preset mode and stompbox mode (on/off pedal)
@M-VAVE
2 жыл бұрын
If the product zoom ms50g supports MIDI, you can connect chocolate through MIDI system, and then look at the manual of zoom ms50g to see what the corresponding PC code or CC code is for the operation you need, and then set the corresponding PC code or CC code in the advanced customization of cubesuite
@GeeSantosBr
2 жыл бұрын
Zoom uses sysex to on/off stompboxes emulations
@EhrosmithTV
2 жыл бұрын
Hello Everyone! I have an in-depth demo on the M-Vave Wireless System. You may want to check it on my channel. I discussed the Overview, Cube Suite app configuration and connection sequence, and the step by step process on how to use it. Im sure it will clear things up for you guys. Enjoy.
@DragonGamers01
2 жыл бұрын
which cubesuite link for android?
@Lauroalmeida
2 жыл бұрын
Hi!!! How can i change the polarity in the foots? i need to invert. when i step and hold it tight, nothing happens. Only when I release it triggers the command. I need that when I press it, it already activates.
@M-VAVE
2 жыл бұрын
In cubesuite, there is a pedal icon, in which you can set the lifting value and pressing value, and you can change the value.
@Lauroalmeida
2 жыл бұрын
@@M-VAVE thanx!!!
@guilhermepoeys6098
Жыл бұрын
Poderiam me ajudar? Gostaria de um video parecido, porem controlando a Line 6 HX Stomp! Nao consigo configurar pra que acione os blocos e mantenha eles ligados apos soltar o botao
@M-VAVE
Жыл бұрын
Você pode participar do grupo de discussão do Facebook do M-VAVE CHOCOLATE e perguntar a outros usuários sobre ele.
@jeant9946
Жыл бұрын
Hi, should we always open Cubsite every time we want to use it? can we use this using other apps beside the cubsite app? Thanks
@paulhenry61
4 ай бұрын
Hola, la app es para configurar las funciones.puedes usar el Chocolate sin la app.
@2bbakbbak76
2 жыл бұрын
Hi! M-vave! Can I connect thr the mooer P1? I try to connecte P1, But It can’t. Do you know how to it connect?
@M-VAVE
2 жыл бұрын
This is a MIDI controller. If the product you mentioned has MIDI, you can connect and control it with chocolate through our MIDI system
@psychobabbleUK
2 жыл бұрын
Hi, I have tried using Advanced mode to set up controlling, changing patches in TC Electronic Plethora x5 guitar effects without success ? Midi codes to control of board down use CC94 64-127, for control of board CC95 64-127 but have followed youtube tutorials but without success, and help appreciated in setting up your footswitch to control Plethora x5 please , thanks
@M-VAVE
2 жыл бұрын
You can send your specific questions to support@M -VAVE. COM, it's best to add video operation. Let's see your details to help you better
@EhrosmithTV
2 жыл бұрын
Helloy Bro! I have a tutorial video on how to use the Advanced Custom Mode..I used it on my Zoom MS-70 CDR.. In advanced custom mode, we can custom assign various functions and preset on any switch. Check it out on my channel. Enjoy!
@diegovilanova1
7 ай бұрын
Hi there, does it work with Nux Amp Academy?
@M-VAVE
7 ай бұрын
I need to see if your effector can send and receive MIDI
@sevecornago3723
2 жыл бұрын
Having non Bluetooch Windows PC with PCI sound card with "IN and Out MIDI" how can I interface with Chocolate Control! Thank you
@M-VAVE
2 жыл бұрын
Use the MIDI B device in the MIDI system, just like the one in the video. That's what the wireless connection says. With the USB port plugged into the computer, you can connect with the product wirelessly. Otherwise, the product has used the USB cable to go usb-midi
@M-VAVE
2 жыл бұрын
kzitem.info/news/bejne/romjzmuaa2Zyopg
@nazar_iv
7 ай бұрын
I can't connect it to Valeton gp 100, Chocolate and midi B keeps reconnecting. Please help.
@M-VAVE
7 ай бұрын
Take a video to Facebook (M-VAVE Zhang)
@jonieevangelista
Жыл бұрын
that 1/4 inch pedal port...what is that for?
@M-VAVE
Жыл бұрын
It can be connected to an external pedal and can be replaced with a midi interface through TRS cable.
@jonieevangelista
Жыл бұрын
@@M-VAVE thank you, I purchased one, it's still on its way here...
@rhoydotp
Ай бұрын
How do I change the display on Advanced Custom mode to reflect the button I pressed. Mine just have 2 parallel lines.
@M-VAVE
Ай бұрын
You can contact me on Facebook (M-VAVE Zhang) and send me a picture
@rhoydotp
Ай бұрын
@@M-VAVE sent you a video via Messenger on the difference display between PC MODE B and Advanced Custom Mode. thanks
@M-VAVE
Ай бұрын
@@rhoydotp OK, replied
@jelonaron4635
Жыл бұрын
Would you know if this will work with Dittox4?
@M-VAVE
Жыл бұрын
I have seen that ditto X4 has a standard MIDI interface, so you need to buy a MIDI system, and use MIDI a to connect with cubesuite. If you don't know what MIDI code ditto X4 uses, you can plug in the product with MIDI a, and then connect to the MIDI wrap software through iPad. You can reverse query the MIDI code corresponding to your product, and then set the corresponding code on chocolate.
@RandzSasot
4 ай бұрын
Hi, Why my MVAVE chocolate is not saving the settings? i tried to update but its saying its already up to date. please i need to make this work.
@M-VAVE
4 ай бұрын
You can send an email to support@sincoaudio.com
@M-VAVE
4 ай бұрын
Send an email with your question
@RandzSasot
4 ай бұрын
I Sent an email just now. thanks!@@M-VAVE
@faniistifani9735
2 жыл бұрын
How to change bank up or bank down from 2 press switch to 1 long press switch. 2 press switch cannot for live performe
@M-VAVE
2 жыл бұрын
Please describe your problem in detail or take a video of your problem and send it to this email support@m -vave. Com
@piotrb7934
8 ай бұрын
I have a problem with my chocolate. After saving the settings, everything works, when I turn chocolate off and on, the settings disappear. I tried Cubesuit Android and PC. I set specific PCs under the switches and save them. What else should I do?
@M-VAVE
8 ай бұрын
Okay, could you send an email to this question support@sincoaudio.com
@TheAribuzik
5 ай бұрын
Did you manage to solve the problem? I have the same
@M-VAVE
5 ай бұрын
@@TheAribuzik You can also send your questions to support@sincoaudio.com
@piotrb7934
5 ай бұрын
@@TheAribuzik I did not solve the problem... the device is not working. I got my money back and bought a second one. Works properly. So just return it to the store.
@valtergomesguitar
2 ай бұрын
Tem algo errado no meu. Todos os modos funcionam perfeitamente, mas o modo advanced custom não esta me deixando configurar. Toda vez que eu clico para editar ele fecha o aplicativo. Eu uso um Iphone
@M-VAVE
2 ай бұрын
You can send an email to support@sincoaudio.com
@nemobahari1
2 жыл бұрын
Help! Updating the system always failed in Iphone, anyone?
@guilhermeoszika7022
4 ай бұрын
Its possible to receive midi in signal ?
@M-VAVE
4 ай бұрын
What do you want to use it on?
@alexamderhamiltom5238
2 жыл бұрын
is this compatible with reaper -> (neural dsp and bias fx)?
@M-VAVE
2 жыл бұрын
bias fx is ok.
@alexamderhamiltom5238
2 жыл бұрын
@@M-VAVE how about reaper?
@M-VAVE
2 жыл бұрын
@@alexamderhamiltom5238 We haven't tried, but the professional audio software Daw can certainly be used as long as it is an audio software containing MIDI interface. Just note that it must be MIDI related, because this is a MIDI controller, not an audio interface.
@alexamderhamiltom5238
2 жыл бұрын
@@M-VAVE thanks for the answer, having people from a company who honestly answer is good experience for us buyer, definitely will buy this.
@JonahHache
2 жыл бұрын
is there a tutorail on how to map E and F?
@EhrosmithTV
2 жыл бұрын
I have an in-depth demo on the M-Vave Wireless System. You may want to check it on my channel. I discussed the Overview, Cube Suite app configuration and connection sequence, and the step by step process on how to use it. Im sure it will clear things up for you guys. Enjoy.
@TomMacalisang
2 жыл бұрын
why is the advanced custom setting not working in the Android app?
@M-VAVE
2 жыл бұрын
You can send videos of your specific situation and problems to support@M -VAVE. com
@bry8500
Жыл бұрын
Is it possible to use more than one chocolate at a time with an iPad?
@M-VAVE
Жыл бұрын
Yes, you can connect two different types of chocolate, but it is worth noting that you should connect one before opening the other, or they will be interconnected.
@bry8500
Жыл бұрын
@@M-VAVE can you be more specific about the connection process on the iPad? I only get one connected at a time in the main Bluetooth screen in the settings. It lists a single connection to foot cnt never more than one. How about a video tutorial showing how this can be done?
@bry8500
Жыл бұрын
@@M-VAVE a separate issue is that I’m also noticing very slow transmission of commands to the iPad when I press one of the switches. It seems to take a while to take affect? it an m2 ipad that is as fast as possible so it should have a quick response.
@M-VAVE
Жыл бұрын
@@bry8500 This problem should not occur normally. You can try the next midi wrap to see if the sending speed is normal.
@mobizoid8261
2 жыл бұрын
Are the switches momentary or latching?
@M-VAVE
2 жыл бұрын
momentary
@mobizoid8261
2 жыл бұрын
@@M-VAVE Thanks
@EhrosmithTV
2 жыл бұрын
Its mix latching and momentary, depends on the setting of M-Chocolate. For Program A and B. Its latching.. In the Advance Custom Mode, its latching too, but theres an option in the advanced custom mode where you can set it to momentary.. I have an in-depth tutorial video of the M-Vave Chocolate. You'll know more on this product if you watch it. Enjoy!!
@GeeSantosBr
2 жыл бұрын
Who's the "pedal" connection behind the pedal? How it works?
@M-VAVE
2 жыл бұрын
You can connect the expression pedal, Volume Pedal and other pedals. You can set the value range in advanced customization
@GeeSantosBr
2 жыл бұрын
@@M-VAVE oh, great. Thank you!
@csillery
5 ай бұрын
Cannot get cubesuite to work in WIn 10 for he life of me. It connects to win, loopmidi on, midiberry on. WIndows sees it. WTF!! Reply
@M-VAVE
5 ай бұрын
Send me your questions via Facebook (M-VAVE Zhang)
@arturbarros6827
2 жыл бұрын
Eu consigo usar um pedal de expressão na entrada do jack p10 do próprio controlador midi?
@M-VAVE
2 жыл бұрын
A interface externa de 1/4 polegadas no chocolate pode ser conectada à expressão pedal.
@arturbarros6827
2 жыл бұрын
@@M-VAVE Meu computador não reconheceu a função bluetooth do M-Vave, mas reconheceu ele com o cabo Usb-C. Eu teria como configurar o Pedal de Expressão com o M-Vave conectado via usb?
@M-VAVE
2 жыл бұрын
@@arturbarros6827 Você pode baixar o código QR por trás do produto no telefone celular Android ou Apple, baixar o software do telefone celular e configurá-lo com personalização avançada no software
@arturbarros6827
2 жыл бұрын
@@M-VAVE Eu teria que usar o modo CC ou consigo configurar o pedal de expressão no modo PC?
@M-VAVE
2 жыл бұрын
@@arturbarros6827 Atualmente, o valor só pode ser reduzido em modo avançado definido pelo usuário. Ambos os códigos PC e CC podem ser configurados em modo avançado definido pelo usuário. Mais tarde, tiraremos a pedal separadamente, que pode ser usada em qualquer modo.
@chuckiemiguelbacolod8558
2 жыл бұрын
Can this be used to control pedals in GarageBand?
@M-VAVE
2 жыл бұрын
Yes, first open the GarageBand soft, enter any module, find the settings, find the advanced and click the Bluetooth MIDI device Find the connected device and click Connect . Then select the CC code for control in the custom mode in cubesuite
@chuckiemiguelbacolod8558
2 жыл бұрын
@@M-VAVE alright! I'll be ordering this and I'll let you know how it goes
@chuckiemiguelbacolod8558
2 жыл бұрын
@@M-VAVE i finally bought it but i am having trouble connecting it to garageband. do you have an email that i could contact?
@M-VAVE
2 жыл бұрын
@@chuckiemiguelbacolod8558 support@M-vave.com
@ridleyribeiro8162
Жыл бұрын
Olá boa noite @M-Vave.. comprei um MIDI USB pra usar no controlador junto com a pedaleira.. e não conecta por nada no CUBESUIT pra poder fazer atualização, pois ele não reconhece... Poderia me dar uma auxílio do que fazer? Desde já fico agradecido
@M-VAVE
Жыл бұрын
Não entendo bem o que você quer expressar, você não consegue se conectar ao cubesuite no lado móvel?
@ridleyribeiro8162
Жыл бұрын
@@M-VAVE isso o MIDI USB não consigo fazer a atualização dele no CubeSuit
@M-VAVE
Жыл бұрын
@@ridleyribeiro8162 Sim, a atualização OTA só pode ser realizada através do cubeseite do terminal móvel, baseado no chip.
@m.i.h5499
2 жыл бұрын
Can I use 2 of them on series mode ?
@M-VAVE
2 жыл бұрын
Sorry, at present, our hardware does not support the serial function. If your software can support multiple Bluetooth devices, you can connect two devices.
@m.i.h5499
2 жыл бұрын
@@M-VAVE thanks
@derisfirmana649
2 жыл бұрын
how to connect with nux mg300?
@M-VAVE
2 жыл бұрын
Hello, I don't see anything related to MIDI in the MG-300 Manual of Nux. If it is an effector with usb-midi, it can be connected to the USB interface of the effector through MIDI B in our MIDI system, and then another section can be connected to the adapter, and then connected through wireless and chocolate to realize control, But nux MG-300 doesn't seem to have MIDI related content, so it can't be controlled.
@derisfirmana649
2 жыл бұрын
@@M-VAVE I made my own pedal control with Arduino and USB Host shield and it works on the NUX MG-300. I bought it out of curiosity about M-VAVE Chocolate and after trying it it didn't work
@jeyatee6345
Жыл бұрын
Why it won't work on my Nux mg30? Is it not compatible?
@M-VAVE
Жыл бұрын
How do you connect? You can search M-VAVE chocolate on Facebook and ask other friends how to connect and use it.
@jeyatee6345
Жыл бұрын
@@M-VAVE i connect to cubesuit to my android and then chose the program A & then i connect the MS1 to my Nux mg30 & nothing happens. I also cannot connect to MS1 via Bluetooth inorder to update it. O don't know why. I was banned in FB & i cannot msg on group page.
@M-VAVE
Жыл бұрын
@@jeyatee6345 There are three modes of MIDI B in MS1. Here we have a video. First, you can check through MS1 what code the MG30 is controlled by, and then set the corresponding code in the chocolate. You can send an email to support@sincoaudio.com Explain your situation in detail. I'll see how I can help you.
@jeyatee6345
Жыл бұрын
@@M-VAVE but why i can't connect to MS1 thru Bluetooth? Is there any problem with my android phone? But i can connect to the m-vave chocolate's Bluetooth but not on MS1
@jeyatee6345
Жыл бұрын
@@M-VAVE i set it the ms1 into host only mode. But i tried all modes and still it won't work. I also updated my firm ware of my Nux mg30. The MS1 is i connect to my PC is asking firmware update but there's no file for update. But if i use android and connect to MS1 and try to update the firmware it says it is updated to the latest. I'm confused.
@alexanderfernandez1245
2 жыл бұрын
ayuda!!! compre este controladorv midi pero cuando quiero descargar la app para trabajar en mi móvil dice que no se puede ejecutar
@M-VAVE
2 жыл бұрын
¿Puedes enviarme una captura de pantalla? Esto debe ser causado por un desajuste entre el firmware y el software, y luego actualiza OTA en la esquina superior derecha del software cubesuit.
@alexanderfernandez1245
2 жыл бұрын
@@M-VAVE cuando descargo la aplicación me dice no puede abrirse el archivo. No sé cómo subir captura de pantalla o por dónde te puedo enviar la captura?
@M-VAVE
2 жыл бұрын
@@alexanderfernandez1245 support@M-VAVE.com Puede enviar un mensaje a este buzón
@derisfirmana649
15 күн бұрын
how to factory reset??
@M-VAVE
14 күн бұрын
Restore factory settings in cubesuite software
@userf909
2 жыл бұрын
where is windows' cubesuite app ?
@M-VAVE
2 жыл бұрын
www.cuvave.com/xznr
@iskhandazulkarnain8880
2 жыл бұрын
Why didn’t support iOS 12
@M-VAVE
2 жыл бұрын
Because the upload platform of Apple software recommends using versions above ios14
@TheXIT
Жыл бұрын
Where in the IOS App is the option to change the 1/4" jack from Expression to TRS MIDI????? This is a nightmare and hours of wasted time!
@philipshergold4771
2 жыл бұрын
This doesn't work with any mobile device I have tried it with. When I click the footswitch A to D on the app it just closes down or comes up with an error message in Chinese. What a waste of money!
@M-VAVE
2 жыл бұрын
You can update the software by clicking OTA upgrade in the upper right corner
@M-VAVE
2 жыл бұрын
You also need to go to the QR code behind the product to download the latest cubesuite. Ensure that the software and firmware are in the latest state so that no error will be reported
@M-VAVE
2 жыл бұрын
You can also send your details to support@M -VAVE. Com to give feedback on the specific situation. Combine your photos or videos
@philipshergold4771
2 жыл бұрын
@@M-VAVE Thank you. I have sent an email but still awaiting a reply.
Пікірлер: 181