Man, I really like the hard case that yours came with. I have the G17 and G19 version. Both of my Veteran came with everything here, except mine are in a Soft bag, or zipper pouch. I still love them. They have worked flawlessly on both models. I use the CCI mini mags with no problems. I bought extra mags for both kits, and I really like Advantage Arms because they support veterans and I am a USMC Combat Veteran ,so that means a lot to me. Great video
@jmartin9059
5 жыл бұрын
*THANK YOU for an actual "honest review". I greatly prefer this to a "just out of the box... presentation", or long commercial advertisement. >> Message to others: If your item is "just out of box" your commentary is not a RE-view.... that would be a "first view" or "first impression."*
@flier556
5 жыл бұрын
Thank you sir!
@d3rylle
5 жыл бұрын
Thank you for this review. I have the 19/23 Gen 4 model and this was my expereince: *stock front/rear sights were dead on. 5, 7 and 10 yards. *I"ve only tested 1 type of ammo Remington Golden Bullets 40G High Velocity PRN. 3 Failures to go into battery, but all 300 rounds went bang *Ordered 15 and 25 round magazines and will those next range trip *My Kit didn't have the same box as yours. Mine came with ; Range bag, rear sight adjustment screw, instruction cards, 10 round magazine, speed loader and slide/barrel. Overall not a bad kit, thank you again and nice video.
@flier556
5 жыл бұрын
Thank you sir! Glad to be of help.
@robbys_pipe_repair
3 жыл бұрын
I appreciate your honesty
@flier556
3 жыл бұрын
Always. Thank you.
@FormerMPSGT
3 жыл бұрын
I used to be in 556th MP CO Siegelsbach Army Depot Germany (1982-83) your site name brought that to mind!
@flier556
3 жыл бұрын
Cool
@pychen1969
7 жыл бұрын
Great review. My LE 19 has the exact same "shoots high" problem. I put paint on the front sight to fix it but kept wondering if it were me or I just got unlucky. The kit is awesome in all other aspects. Now I know all AA kits are probably made that way. Thanks for sharing your experience.
@flier556
7 жыл бұрын
+pychen1969Thank You NP. Glad I could help. If you wanna go the route I went, you can get the sight at Midway USA online. It's only 35 dollars, it's just the right height, easy to install, much easier to pick up, and easy to install. I got the idea from my Glock 34. I run this same sight on it for shooting steel competitions. Just search for Glock HiViz High Front Sight. It even comes with different color light pipes. I use Ted on these, and green on the 34. Enjoy!
@rynewhitaker
3 жыл бұрын
soo i have a glock 44 22lr could i convert vice versa
@ozysjahputera7669
3 жыл бұрын
Thank you for this review. Very helpful.
@flier556
3 жыл бұрын
You welcome sir.
@DjRayRay09
Ай бұрын
I know this post is old but I am interested in knowing what’s the equivalent to that front fiber optic sight listed at Midwayusa today? I really like that front sight and I just picked up this conversion kit for my Glock 17 gen 3 Update I just read another comment you posted on here explaining which one, so it’s essentially the sight for the Glock 17L or 34
@bdm1000
7 жыл бұрын
Just a side note, the Glock 26 is NOT gen specific. It uses the same one for both. That might be one of the only exceptions (if not the only).
@corycas7295
6 жыл бұрын
Now I hear these gen 3 advantage arms will fit n e poly 80 frame whether it says glockspecific number like 19 18 23 24 ECT. So u can buy the new pf940c frame ( polymer frame) compact orsub cpmpact
@SRVandDtrouble
3 жыл бұрын
What is the Difference between a L. E. G23 And a standard G23. I ask because will the Advantage Arms marked L.E. 19/23 work on my standard G23?
@flier556
3 жыл бұрын
Theres no difference. That's the only way they make it to the best of my knowledge. I run them on regular standard glocks.
@SRVandDtrouble
3 жыл бұрын
@@flier556 Ok thanks it's weird some of the Advantage Arms are stamped L.E. 19/23 like what's the purpose of that.
@flier556
3 жыл бұрын
Not sure. I dont recall seeing one that isnt.
@foreignwhipcrasher7388
4 жыл бұрын
Mines arriving tomorrow !
@flier556
4 жыл бұрын
Good luck with it sir.
@250rapid
6 жыл бұрын
flier556, I know this is an old video and not sure if you still have your G19 AA kit, but I was wondering if the front sight on your Advantage Arms L.E. 19/23 slide is the model GL2011 - 0.215 inches tall (5.461mm)?
@iyn1911
6 жыл бұрын
Thanks for the video. I got lucky with my Gen 4 G-17. Sights hit point of aim @25yds.
@flier556
6 жыл бұрын
Thank you sir good luck with it and pretty cool on the sites.
@DK-vx5co
3 жыл бұрын
It's been many moons. How did this hold up in competition? I keep hearing about failure to feed, stove--pipes, and failure to eject problems. That would blow any competition. How did you fare? Any tips on reducing these failures?
@flier556
3 жыл бұрын
Thank you sir. CCI ammo pretty much eliminates any issues at least with the 10 round mags.
@Mike-xi4zt
6 жыл бұрын
Sounds like the recoil spring is generating to much force for certain 22 ammo to overcome. One of the non discussed problems of a striker fired system is the recoil spring has to be more powerful than the striker spring; and it has to do it at the end of the recoil spring stroke when it is at it's weakest point, when it is fully extended, not when it is compressed. A combination of lighter recoil spring and a lighter striker spring would probably be a solution to the lower recoil 22 lr cycling problem.
@markrossington6884
3 жыл бұрын
Excellent review
@flier556
3 жыл бұрын
Thank you sir
@billyquin3216
2 жыл бұрын
Stingers, Mini Mags, or Velocitors is what I use
@charlesbyrneShowComments4all
6 жыл бұрын
Is there a break in period? The TSG conversion kit requires a break in period of about 500 rounds and from what I have seen on YT they don't like the winchester white box ammo, but that bulk ammo is problematic with other 22 pistols and some rifles.
@flier556
6 жыл бұрын
+Charles Byrne True, and I would only expect functioning to improve with use. Be safe, good luck. Hope this helped.
@Paiadakine
4 жыл бұрын
Charles Byrne I’ve shot one out of the box on a two different gen 3 g19. With cci and Remington goldens the aa 22 conversion worked perfectly. 10 rounds as fast as you can shoot. Over and over no issues at all. Some of the other 22 brands were not as reliable. Issues like stove piping, short strokes, no extractions. Also thunderbolt and Winchester m22 worked well. Winchester 36 gr that comes in a 333 round box sucked big time. Good luck.
@user-hx6do7zi7f
7 ай бұрын
mine has failure to extract spent case
@ogarzabello
7 жыл бұрын
GREAT REVIEW!!! Thanks!
@flier556
7 жыл бұрын
+ogarzabello Thank you. Glad it was helpful.
@OscarGarcia-xl3mr
7 жыл бұрын
Hi. Nice video! I just find that Midway USA has only the Hiviz tall sight for Glock 17, I´m wondering if this one is compatible with the Advantage Arms for Glock 19? My conversion also works good but has the same problem with the sights. It shoots a little bit high.
@flier556
7 жыл бұрын
+Oscar Garcia Yes sir. Thats the one. Get it and your problem will be solved.
@TurfSurf
3 жыл бұрын
Good video! Saved me $$$!
@markdittell
6 жыл бұрын
Don't like how picky this is about ammo. 500 rounds of break-in sounds like a very long and very frustrating day. that is a total shame, if I have to run premium 22lr ammo I'll just run 9mm and be done with it.
@timgiles9413
6 жыл бұрын
@ 12:30 you said it's a stainless steel slide, I think the slide is aluminum??? Great info on the conversion, thanks
@flier556
6 жыл бұрын
+Tim Giles If I said its stainless at any point, my bad. Its definitely NOT STAINLESS. ITS ALUMINUM. Thanks. Glad you liked it. And after approximately 2 yrs, if I had to fo it all over again, this is definitely still the one I would pick.
@raygun31st55
7 жыл бұрын
Great video
@flier556
7 жыл бұрын
+Chase Thompson Thank You.
@Youtuber-uz5hc
6 жыл бұрын
Excellent review. Best one out there on this by far. Subing.
@flier556
6 жыл бұрын
+KZitemr 1 Thank you. Glad my video was helpful to you.
@gagunshooting803
7 жыл бұрын
Good review... great info!!!
@flier556
7 жыл бұрын
+Gerald Weldin Thank you.
@JuraT16
3 жыл бұрын
Where are you getting the cci ammo from? Thanks for the informational video.
@flier556
3 жыл бұрын
I havnt gettin any lately. Thankfully I stocked up while it was available. It will come back eventually.
@jerdog333
7 жыл бұрын
great video!
@flier556
7 жыл бұрын
+jerdog3 Thank You.
@jamesemery7412
6 жыл бұрын
link to buy this converssion kit ?
@flier556
6 жыл бұрын
At the moment I honestly can't remember where it was I ordered them from I believe I mentioned it somewhere in the video when I mentioned the price. If it comes to me I will post it good luck in your search.
@billedinger71
5 жыл бұрын
I feel like the mag should hold around 20. Are they double stacked?
@flier556
5 жыл бұрын
The 10 rounders are the only ones that are reliable.
@tommygun6028
7 жыл бұрын
Nice video.. Cheers....
@flier556
7 жыл бұрын
+Tommy Gun Thank you.
@michelleadams6999
5 жыл бұрын
Those boxes look just like some of my new er sig boxes. I've always wanted to try one of these i was introduced to advantage with the first Glock handgun paper work i think they wanted 300+ which steered me away. Does anyone know this kit vs the issc glock 22 clone
@flier556
5 жыл бұрын
Pretty sure I paid just under 300 each for them.
@Wooley689
7 жыл бұрын
Thanks for the great review, been wanting to try a conversion kit but the cost for me is questionable on them.
@flier556
7 жыл бұрын
+Wooley689 Thank you. Glad you found it helpful.
@moeynola6747
6 жыл бұрын
Looks like a nice kit but for 299 they could of included 2mags..no big deal
@flier556
6 жыл бұрын
+moey nolala I know. I guess it is what it is. They do at least offer and sell extra mags, if you need them.
@DIXIDAWG
6 жыл бұрын
moey nolala i
@1903tx
6 жыл бұрын
Okay
@biker1958
Жыл бұрын
Shot lead 22LR out of mine and it fouled the barrel horrible.
Пікірлер: 72