I love my terminator. It’s extremely accurate. I’ve shot approximately 200 squirrels at 47 yards offhand from my dining room patio door to my back fence. i’m constantly amazed at the accuracy.
@airgunsusa4362
2 жыл бұрын
Now that’s impressive. Quite small targets and shooting offhand!
@Scott-cu4ol
2 жыл бұрын
@@airgunsusa4362 thank you. to clarify I do lean against the patio door frame But I’m standing up with no other aid
@jonathanhendrickson2293
2 жыл бұрын
what ammo are you using?
@Scott-cu4ol
2 жыл бұрын
@@jonathanhendrickson2293 JSB Diabolo 81,02 grain
@RunTeam
2 жыл бұрын
Nice video, nice gun 👍👍
@airgunsusa4362
2 жыл бұрын
Thank you 🙏
@motorgearhead
2 жыл бұрын
good video... Thanks for posting it. The accuracy looks pretty good.
@airgunsusa4362
2 жыл бұрын
Yes , it is an accurate gun with all 20 shots. I don’t see the shots drooping down after 17 1819 or 20 at 50 yards. It’s very consistent because it has two air tanks and 700 cc’s of air. Thanks!
@cliffsoutdooradventures9787
2 жыл бұрын
Great video nice shooting..
@airgunsusa4362
2 жыл бұрын
Thanks Cliff. I found out, after much error, that a clean barrel equals a more accurate gun.
@backyardairgunfun462
2 жыл бұрын
If u use alot of jsb pellets and its a terminator so of course you do lol ur Barrel will always appear to be dirty but it's actually not jsb exact 81 grain pellets r coated in powder graphite as a dry lubricant so you'll always have what looks like lead dust be its actually the powder graphite. Still good to clean ur barrel every 200 300 round is what bin tac recommend.
@airgunsusa4362
2 жыл бұрын
I agree. I just know that after I cleaned all the graphite out it went from shooting 2-3 inch groups to 1 to 1 and1/2 inch groups. I didn’t know they coated them with graphite dust. that does make sense why there was so much graphite in my barrel.
@backyardairgunfun462
2 жыл бұрын
@@airgunsusa4362 yeah that's why they have a darker look u can clean them and they become shiny and yeah I mean u still have to clean regularly I just hate seeing other videos with ppl cleaning barrels that have used a graphite coated pellet they'll pull a patch out and think it's all lead dust but it's really the graphite. airguns are somewhat self cleaning it's awesome
@LG-bi8cv
2 жыл бұрын
Did you a chrony? Less power than first gen
@airgunsusa4362
2 жыл бұрын
Yes I Chronographed it in another video and it averaged 840 ft./s. My distributor told me that they put a less powerful hammer spring in the second generation because the first generation was breaking magazines.
@rascoe1717
2 жыл бұрын
What’s the max depth or height of a pellet that can fit in the magazine?
@airgunsusa4362
2 жыл бұрын
I don’t know the exact height or depth, but I do know that you cannot shoot slugs that are greater than 84 grains through the magazine unless you single load it. I have heard that you can single load bigger slugs but I haven’t tried it myself yet.I tried shooting a 95 grain pellet through the magazine and it got stuck.
@spinnekop
2 жыл бұрын
Hi, great video. It truly shows what the terminator is capable of. You mention that you cleaned the barrel. Can you explain how you were able to clean it. I tried it myself but the spring always closes the barrel port so i am inable to pull my cleaning cord through the barrel. Would you be able to show by video how you keep the barrel open for cleaning ? I am so very interested :-)
@airgunsusa4362
2 жыл бұрын
Thank you, I appreciate it. I cleaned the barrel with a ramrod that you can put a screw on attachment. I used two attachments: one was a cotton .357 size with some HOPPES spray cleaner. There was tons of lead buildup in the barrel. Second, I put another attachment that you can squeeze your cotton cleaning cloths on. Then I rammed it up the barrel with cleaning solution on it. Then, after the cloths were clean, I dried the inside of the barrel with dry cotton cloths. I never did clean where the bolt was…yet, but I plan to have my wife hold the bolt open while using a ramrod and some cotton cleaning cloths soaked in cleaning solution.
@backyardairgunfun462
2 жыл бұрын
That may work or u can let the air completely empty the air!! And u can remove the barrel and really clean it good but if u don't want to do that then I'd recommend what airgun USA said but I will add do it on very low pressure .
Пікірлер: 22