This taught me some good lessons on suppressor signature. If you look at a rock face and see puffs of smoke, most likely where the lead is coming from. Things you kinda take for granted.
@mattwaldo4500
Жыл бұрын
I’ve got a Lahar-30 in route right now. I’ll let y’all know how it is 10 months.
@FoxxStar77
Жыл бұрын
In route in 10 months. lol Same here.
@All_Things_Pew
9 ай бұрын
Well it’s been 10 months……. How it it??
@mattwaldo4500
9 ай бұрын
@@All_Things_Pewgot it in September. It’s pretty good! Wish the mantle qd system was out but I’m rocking the SiCo asr qd system and it’s pretty good. So far it’s great!
@brentstainbrook9554
8 ай бұрын
Same here
@davidnickname4149
8 ай бұрын
Its been 10months. Whats up?
@jeffcooper5026
3 ай бұрын
I've had a Lahar 30 for about 3 months....ATF took 4 days for the stamp....this is my first can and its awesome. I had 5 rifles ready to go for Dead Air Keymo and after looking at stats vs the Sandman - S I went with the Larah and added a Keymo adapter. Just ordered a Lahar K and DA428 Dead Air adapter from Battle Hawk Armory $399 for the can and $157 for the adapter. Thats hard to beat.
@MrRebar15
Жыл бұрын
*Aero Precision, LLC* Bravo well done, thanks fellas for taking the time to show us. GOD Bless.
@Emoboijeffrey
Жыл бұрын
One without the steel would be cool too to see the true quietness of the can 👌
@mattwaldo4500
Жыл бұрын
@@TacticalBuffoonary kinda the opposite imo. I take how loud the steel is compared to the suppressor and make estimates off that.
@MOTOSCOUTtv
Жыл бұрын
@@mattwaldo4500 Precisely. The steels offers a decibel reference. Most people know what a steel impact sounds like and approximately how loud it is. If the impact isnt there, you just get the tone of the suppressor. Which is cool and all, but most people care about how loud it is. The is especially important when shooting in a rock query where sound is amplified. Also, the steel acts as a honesty meter. If it were just the can with no impact, Aero could easily make the can sound quieter than it really is.
@MOTOSCOUTtv
Жыл бұрын
@@TacticalBuffoonary Also, since there is no mention of the "quietness" of the can in this video or in the title or description, it's probably safe to say that the purpose of this video was not to demonstrate the quietness of the can, but rather to just make a nice soothing video with sounds we all know and love when we go to the range.
@JPFB-yp6pw
Жыл бұрын
MORE LIKE THIS PLEASE
@Highway9mm
Жыл бұрын
So peaceful.
@AeroPrecision
Жыл бұрын
Our zen place.
@milesrost6674
11 ай бұрын
Brass tumbling down a rock face is strangely satisfying. I'll pick up some of these AFTER they release the QD. -Stay Strong, Chase Excellence Brothers."
@maxspthales1400
Ай бұрын
Being back the Quad Rails!!!
@Spushed
Жыл бұрын
That is obviously a bolt-action suppressor because on a semi-auto you are belching so much smoke out of the chamber it's not even funny.
@jwehring88
Жыл бұрын
Any possibility that full quad rail M5 hand guard will be made available?
@AeroPrecision
Жыл бұрын
No. That is a Gen1 Enhanced Quad. Very old. Still nasty.
@grizzles9652
Жыл бұрын
@@AeroPrecision It would be really nice to see a full quad rail from you guys, I love my Atlas and Gen 2.
@AeroPrecision
Жыл бұрын
@@grizzles9652 A lot of us in the office would agree with you.
@grizzles9652
Жыл бұрын
@@AeroPrecision First you had my interest now you have my attention. We will watch your career with great interest.😉
@laytonfairchild3700
Жыл бұрын
Excellent video!!! Sold me on one for my 6.5 creedmoor bolt!!!
@nomad5454
Жыл бұрын
Alot of gas being pushed back tho 🤔
@shep41682
3 ай бұрын
Will a deadair Ebrake work on it?
@glennwilliams3692
Жыл бұрын
If you too suffer from the Aero build addiction there is HELP! Jk there's no cure 😂
@jeffcooper5026
3 ай бұрын
I know the cure!!!!!!...you make so many you have to sell your lest favorite so you can make more....then the AFT mans shows up at your door and ask you politely to stop making/selling so many and gives you a "warning" letter. Well it wasn't exactly a cure....I'm still addicted so I got a bigger gun safe.
@brido357
Жыл бұрын
Would be cool to see a 300blk build with the lahar suppressor
@AeroPrecision
Жыл бұрын
Ask and you shall receive.
@brido357
Жыл бұрын
@@AeroPrecision Looking forward to it, cheers
@TacticalBuffoonary
Жыл бұрын
@@AeroPrecision How about not shooting the fucking steel???
@AeroPrecision
Жыл бұрын
@@TacticalBuffoonary Just for you, we are going to make videos ONLY shooting steel.
@cedricvickers4592
7 ай бұрын
300-blackout
@ivanbadillo4909
Жыл бұрын
I'm expecting this can sometime this week. When can we expect the QD mounts to be available? I also need a ½x28 end cap. Can I get any help with that?
@The10thManRules
Жыл бұрын
Is there a .223 bolt head in the works? I'm interested in making a 300 HAMR bolt gun. I need to get busy getting one of those suppressors to complete the build. Please take my money.
@firemedic23-5
Жыл бұрын
I thought it was interesting the why he held his magazines to load it, with the bullets pointing away. I have never really given it much thought but I hold mine sideways with my left hand, pointing right, same as lodading handgun magazineses.
@Rocksteady713
11 ай бұрын
Will the standard size work for 308?
@Mudkips4lif3
Жыл бұрын
Love the vid but where’s the Mantle at…Coming soon for a hot min.
@swaggercomander10gamer90
Жыл бұрын
Will areo ever bring back the full quad rails😢
@jakeconger3706
Жыл бұрын
was that quick attach on which muzzle device?
@Mike_Y.
Жыл бұрын
Just bought an ME401 lower for my next build, love your products. Want your enhanced buffer tube to complete it
@kevinfitzsimmons1258
Жыл бұрын
sniper eject brass off cliff. bad sniper.
@jeanbaptiste5370
Жыл бұрын
can you guys bring back that full rail
@Scottish7982
Жыл бұрын
what mount / muzzle device is on the first one?
@joelembcke8879
Жыл бұрын
When do we get the mantle?!?!?
@pizzasteakphocheeseburgeri2965
Жыл бұрын
@1:44 inefficient economy of motion
@fastbanshee1999
Жыл бұрын
Ill bet the barrel gas port was drilled to .120 to make that 308 run. Ive ordered 3 lahar 30L's from my lgs.
@AeroPrecision
Жыл бұрын
You'll bet wrong.
@user-xc8qd1qh1n
Жыл бұрын
Aero! Thank you for the quality options out here! Got a question about the Enhanced Quad Rail you all do. I love the idea but for whatever reason the oval slots behind the picatinny on the sides and bottom say "Finger snag" to my brain. Could those be M-Lok slots instead? Or would that be a rigidity issue? Definitely wouldn't mind this full quad handguard being produced again either! Will be considering the Lahar for future builds!!
@AeroPrecision
Жыл бұрын
A bunch of us purists here in the office have been campaigning to bring the Enhanced full length quad back, or bring on a new one with a slimmer profile. But to no avail... yet. Winners never quit.
@zen8791
Жыл бұрын
@@AeroPrecision soon! Please!!!
@monocogenit1
Жыл бұрын
nice. sweet range as well.
@sparkylarry9999
Жыл бұрын
Just bought one for 15% off with promo WGL15! Can’t wait!
@Ds0drew
Жыл бұрын
what camera and audio setup are you using?
@AeroPrecision
Жыл бұрын
I don't know we hire camera nerds for that.
@MrCMR901
Жыл бұрын
What was the barrel length on the M5?
@AeroPrecision
Жыл бұрын
16"
@smashmode8175
Жыл бұрын
very cool video
@JNOSNOW
Жыл бұрын
Wonder how these are going to work the M5. My friends will absolutely not run with his sandman how it came set up.
@AeroPrecision
Жыл бұрын
Interesting. We have it running on an M5 here in his video. M5s and AR10s can be very fussy with suppressors if they are not tuned for them. If a shop or gunsmith is building a M5 to be sold complete, its probably not tuned for suppression.
@JNOSNOW
Жыл бұрын
Yeah it's a an upper and lower that I thought he bought on your website a year or so ago but it was a factory built rifle. It functions great with no suppressor but with the suppressors it chucks the cases with fury and a giant poof of gas. I sat the and stared at the action while he was running it with the can on and it seemed to me signs of over gas. Not my rifle and I'm sure what he has done since then or if he has gotten it running right since.
@AeroPrecision
Жыл бұрын
@@JNOSNOW Sounds like it is over gassed, which makes sense. Tryin changing buffer weight, or switching to an adjustable gas block and dialing it in.
@joshuas390
Жыл бұрын
Any time frame for the Aero Mantle QD release??
@danielmottweiler
Жыл бұрын
Ya gotta love target shooting in the Pacific North West .
@AeroPrecision
Жыл бұрын
It's really a zenful time.
@UmamiPapi
Жыл бұрын
Last time I was out some dick eating ranger came to tell us we were allowed to shoot, but needed to repark further away from our spot. On a mountain. Glad I pay his wages for him to act like a wilderness meter maid.
@crusiethmaximuss
Жыл бұрын
😌Soothin'.
@KaBeeyz
Жыл бұрын
Nice finish on that build. So quiet for 5.56. I want one.
@AeroPrecision
Жыл бұрын
Luck for you, you can build your very own!
@blackonblack...9244
Жыл бұрын
@@AeroPrecision It's great and I love it. I just don't care for the paperwork and I'm broke. Abolish the AFT and Let's Go Brandon!
@wiseguy724
Жыл бұрын
Mantle QD Store page link? Can't find it.
@AeroPrecision
Жыл бұрын
Mantle QD isn't available for retail quite yet. Still crossing our T's and dotting our I's there.
@wiseguy724
Жыл бұрын
@@AeroPrecision will these work with your existing muzzle devices or is there new ones coming out?
@AeroPrecision
Жыл бұрын
@@wiseguy724 New ones will be coming out.
@navseal345
Жыл бұрын
🇺🇲🦅🇺🇲
@JerrBearTactical
Жыл бұрын
Would love to see that on an EPC9 😉👊🇺🇸
@AeroPrecision
Жыл бұрын
It's a .30 cal suppressor. It would be a bad time on an EPC9.
@jeffcooper5026
3 ай бұрын
@@AeroPrecision Aero did a smart thing with the removable end cap and serial number near the mount. Most baffle strikes are end cap....but shoot a 9MM thru it and I'm pretty sure its toast from the first baffle....does the Aero warranty cover "dumbass"?
@beardly0121
Жыл бұрын
Just out of curiosity Is it manufactured by KGM?
@AeroPrecision
Жыл бұрын
Manufactured 100% in house here at Aero Precision.
@beardly0121
Жыл бұрын
@@AeroPrecision Very cool. Is this more of a traditional can or does this have any of the newer "flow through" technology? I'm on the verge of buying my first can which will primarily be used for 5.56 although maybe occasionally 7.62nato and I'm definitely willing to consider an Aero product as I have had a good experience with your ARs. Also, do you know approximately what kind of price point this can will sell for?
@mindovermachine9501
Жыл бұрын
@@beardly0121 It's a traditional suppressor. MSRP below 30k: $549 30: $649 30L: $749
@AeroPrecision
Жыл бұрын
@@beardly0121 Its quite traditional, but incredibly robust and economically efficient. Check out more info on our website!
@kassenz
Жыл бұрын
Thank you for making a silencer video without the cheesy 1980s guitar rock masking the sound of the suppressor
@LibertyArmsCo
Жыл бұрын
Thanks for this video have had it in my cart for a week now
@anthonybeshara2939
Жыл бұрын
Whoa, whats the paint job on the M5?
@MOTOSCOUTtv
Жыл бұрын
DNC by Ely Yerian Designs.
@aflickt4162
Жыл бұрын
Can y’all make that handguard again pleaseee
@CH-eb1rn
Жыл бұрын
Please make those M5 quad rails again
@AeroPrecision
Жыл бұрын
If enough of us believers come together in protests, maybe our product team will finally see the true beauty of a full length quad once again.
@MrJamesD
Жыл бұрын
Oh God.... if only it wasn't so difficult and time consuming to outfit my Aero Precision .308 with a suppressor 🥲
@AeroPrecision
Жыл бұрын
It's not difficult at all, and the filing process is not very time consuming. It's just that agonizing approval wait time.
@x0j
Жыл бұрын
what are u guys gonna do when bob ferguson bans you from coming to work?
@AeroPrecision
Жыл бұрын
go to work.
@x0j
Жыл бұрын
@@AeroPrecision pretty sure they even outlawed exports. You guys are boned. Maybe sell me a CNC on the cheap
@rockclimbingable
Жыл бұрын
I heard that Aero got a Parden.....
@x0j
Жыл бұрын
@@rockclimbingable yeah, they had to take the snowdog challenge though.
@jeffcooper5026
3 ай бұрын
@@AeroPrecision Come to Texas!!!... just stay away form the "Peoples Republic of Austin". Still haven't figured out why Magpul picked Austin. I would have gone SW of Forth Worth where the towns are 90% MAGA and open carry doesn't shock anyone! 🙂
Пікірлер: 104