I've been watching your videos for years and can't thank you enough for all the amazing tips you're handing out. But what really baffles me is how insanely steady you are on your hand, really impressive!
@sharg0
3 жыл бұрын
By far you present the clearest videos of welding I've seen - very impressive work that I bet many schools have great use of! (I'm not a pro welder but machinist and instructor so I appreciate your channel and what you do for the manufacturing community)
@weldingtipsandtricks
3 жыл бұрын
Thank you very much!
@justinmartinez680
3 жыл бұрын
I've seen his videos played in school
@Afghanxx
3 жыл бұрын
@@justinmartinez680 same with welding schools in Canada. Instructor recommended very few youtube channels, but weldingtipsandtricks was highest on the list. Always great videos.
@sanjaysami4315
3 жыл бұрын
Jody, it’s amazing how you consistently produce videos with great information presented with such incredible clarity. I’ve been welding 30 years and I keep learning from you. Thank you 😊
@rmkscrambler
3 жыл бұрын
So a welder who worked for the air force once told me that for fun they would challenge each other to remove the aluminum foil from a gum rapper and weld two pieces together. He said the irony was that amongst the guys involved, The challenge was more about finding a machine capable rather than the person.
@atticus9907
4 ай бұрын
A gum wrapper……absolutely impossible. Signed,a welder specializing in TIG with over 2 decades experience.
@austindyer7089
3 жыл бұрын
As someone who spent a good 11 years in the military working on aircraft’s, but always wanting to be a welder not the mechanic, this video was very interesting and informative. You are the best and thank you for continuing to put out content like this.
@MrLadysman333
3 жыл бұрын
I am currently attending welding school at the moment and I’m interested in taking the aerospace path, thanks for the tips!!!!
@k..............1622
3 жыл бұрын
I regularly used 100pps on Ultra high vacuum parts that I used to do. Makes for a very nice focused arc
@KevinKimmich44024
3 жыл бұрын
When I couple hands-on practice with your videos and narration, my skills improve much more quickly. It's easier to fill in gaps of understanding that way. thanks.
@mikepettengill2706
3 жыл бұрын
Your generosity as a teacher is right up there Jody, really.
@davidshell1738
3 жыл бұрын
Morning Jody☕️ Don’t know how I missed this in my e mail. The stop/start test you do is a great idea, more real world👍 I passed my D17.1 tests on 4130, 17-7, and Titanium with help from your videos and a lot of torch time with my old Syncrowave 300. I choked on the inconel and aluminum tests though.😖 Back to work! Thank you for the great content!👊
@jamesa7506
3 жыл бұрын
That edge bead looked great! A very good test for lots of different applications.
@chuckh2469
3 жыл бұрын
Jody, thank you for your willingness to share some of your experience and wisdom. For awhile I got to fuse Ti strips for a local Aerospace Co. Thank you again for your time and talent.
@goldneckprospecting4534
3 жыл бұрын
I appreciate all your videos and I admire your skills and dedication to teach and pass on the knowledge. My dad use to take me to his work every Friday night at the local saw mill up in northern California on night shift when I was 8 years old. My dad was a saw filer he taught me to stick weld and tig weld I would stay up all night every Friday at my dad's work and just weld random objects. Later in life at 18 I got a job at the saw mill as a millwright labor then to an apprentice, then to journeyman millwright 16 years later I started my own mobil welding business.
@maloyaircraft1174
3 жыл бұрын
I’ve learned so much from watching your videos. Thank you for the years of contribution.
@bcbloc02
3 жыл бұрын
It looks like you run a closer to 90deg torch angle when running the clear cup than you do with the ceramic. I guess that is an advantage of being able to see thru the cup you get a better approach.
@stevenhughes9743
2 жыл бұрын
Had to do this test when I worked for Lufthansa airlines. I did the test in Inconel 718 and HSS 188. very interesting alloys to weld once you nee how to😂
@pitcuz
3 жыл бұрын
I was honored to take the welding course with you at that large Airline located in Atlanta GA. Excellent instructor. See you at Dollar Taco one day.
@jowa5701
3 жыл бұрын
This channel is where i learnt to weld. Thanks alot for all your amazing videos.
@weldingtipsandtricks
3 жыл бұрын
Great to hear!
@slackwellman5499
2 жыл бұрын
I’m in school and doing well. Big thanks to you Jody.
@cjgibbons5850
3 жыл бұрын
In the oil field, we use a single flow meter with a Y to back purge SS pipe. A little cheaper and takes up less space in your truck.
@jonhanson6796
Жыл бұрын
Another great tip we used at GEAE was to make sure you clean your filler wire and plate with a clean rag with acetone. Giving less chance of any porosity from the base metal and filler wire.
@laprepper
3 жыл бұрын
Still working on passing my 2g. Soon hopefully 🙂
@razormazor6947
3 жыл бұрын
Nice, You got this !
@WarpedPerception
3 жыл бұрын
Jody, I've been waiting for this one for a long While! I can believe you did it!
@gnarlock3927
3 жыл бұрын
Excelllent information, I always fight that burn back on the thin materials. Will give this some practice
@toolgadgets
2 жыл бұрын
Im welder aerospace from Morocco tank you so much
@olddawgdreaming5715
3 жыл бұрын
Thanks Jody, great information. It pays to practice. Thanks for sharing with us, Fred. 🙏🏻🙏🏻👍👍👏🏻👏🏻👋👋
@oneandonlytoyota
2 жыл бұрын
Just ike me holder brother,best tig welderever i know 71 now still perform like a pro.
@TheJr2010
3 жыл бұрын
You make everything look so easy
@dennisstarkey2042
3 жыл бұрын
thanks for the info! i am a total amatuer but strive to learn and do my best
@paulp96275
3 жыл бұрын
Great thanks just started using Tig with your channel I’m getting some great instruction 👍👨🏻🏭🇬🇧
@OkinawaWild
3 жыл бұрын
Test to weld on stuff that belongs to the USAF used to be butt (like in the video), fillet, and tube to plate. So three welds for each of eight metal groups. 4130, 321, 17-7, 718, L605, 6AL-4V, 6061, and Mag. Later they changed it to the same eight metal groups, but a single thin-wall 1" pipe in 6G. One stop-start, 6-12 and 12-6. No larger than a #8 cup.
@thzzzt
3 жыл бұрын
Hey Jody why not do a video on stick welding end craters and how to fill them in? I've searched KZitem and there is scant info on this. Currently I just fill in the crater with a spot weld or two ten seconds after I finish the main weld, but I don't think that's how pros do it. An example using 6010 would be best.
@tapioca7115
3 жыл бұрын
I like watching you weld man.
@ktmturbo5836
3 жыл бұрын
Nice video. Maybe mention that cleaning filler rod is important.
@mikalehtinen315
3 жыл бұрын
Jippii, awesome video again. We in Finland dont have pedals, only ramp up and ramp down, well at list i dont have pedal. Greetings from Finland.
@macc1370
3 жыл бұрын
What type of buttons do you guys use over there?
@MrCHEVYNOVA69
3 жыл бұрын
Hi Jody, love the videos, I've learned alot from you over the years. Which airlines did you work for?
@weldingtipsandtricks
3 жыл бұрын
Delta
@jeremiahhebner8593
2 жыл бұрын
Thanks Jody
@Strings-jg2to
2 жыл бұрын
We have Spirit Areospace in my town and I heard welders only get an average pay of $18-19 an hour unless you work on tooling.
@inkbl0t3tatface43
2 жыл бұрын
Question as a new welder/tig welder: what's being done/how does the breathing in these fumes while welding affect lungs and breathing? Is there techniques in slow breathing while welding? Is there breath masks? I'm sure/hope there's heavy vacuums going within the shops in ur work Station depending on company? I guess I'm just simply asking how can welders breathe clearly while working? Yes, I have not started yet, but have practiced outside with extreme ventilation. But the videos I've seen to learn knowledge have almost always been indoors-ish. I know I need to ALWAYS learn safety first.
@crakilldurmom
3 жыл бұрын
Super thin sintered hasteloy was almost the death of me in my 20's. These parts were for chemical filters.
@omegaman.1595
3 жыл бұрын
Exactly the same test piece that I have to submit for my AWS code. 🇬🇧
@piotr4535
Жыл бұрын
Dynasty 300 I use 1200 pps 82 percent on the up 12 on the down.
@dereksaxon6033
3 жыл бұрын
I’d be doing this for a living If only I could get Lockheed to hire me! I’ve Interviewed twice only to get declined months later for unknown reasons. Anybody got any suggestions? I could pass the tests if I could get by the gatekeepers!
@jerzybird89
2 жыл бұрын
I also been denied twice from lockeed, my father works there also. It’s very difficult for a welder to get “ your foot in the door”. He suggest to apply to a different department and network through the company to change departments. I just got hired to delta airlines and going through the fingerprinting process. Wish me luck.
@buddylee19082
3 жыл бұрын
So clean, so smooth, so perfect...!?
@nickmaclean5816
2 жыл бұрын
Love your videos!!
@dannymendez
Жыл бұрын
Hello there, can you please check this video, this is SpaceX Tig plate test, is a 3/16 stainless steel plate and the other is just weld on the top of it. And demonstrated how you maybe can weld this workout running the cup. Must be handfree. Also the weld can't burn the edge of the top plate. Thanks in advance
@doasimbok
3 жыл бұрын
Incredible weld ...
@CmdrMoros
3 жыл бұрын
Thanks Jodi... Tell Goodman he is a datsun and you are the cadillac lol!
@johngodden1665
3 жыл бұрын
Great video! Do you have a video on how to set up right lens darkness? I am a novice in any arc welding. Although long time in acetylene, where I can see just fine. Thank you for all your videos.
@drpipe
3 жыл бұрын
Edge build up 💪
@gabrielcloutier8917
3 жыл бұрын
Love your videos
@piotr4535
Жыл бұрын
Best tip hands down welding nickel: put a flat on your tungsten.
@J2D2S2
3 жыл бұрын
awesome video thank you
@krrrruptidsoless
3 жыл бұрын
Just wondered if you've done any welding with a laser welder?
@MrTweesy420
3 жыл бұрын
Hey! This is what I do! Nice video Sir. Hastx, inco625, inco939, Haynes 188
@hooman_welder2191
3 жыл бұрын
Peace be upon you, do not be tired, I congratulate this beautiful face from the server and I congratulate your beautiful art. I am Hooman from Iran, the city of Isfahan. And your colleague, I am in this profession .. Do you take pride in meeting and befriending Hooman .......? Sorry, if there is a flaw in the articles, I'm sorry because I talked to you through Google Translate
@latenitefab
3 жыл бұрын
The D17.1 Aerospace certification doesn't allow you to start, stop or tack the center of your weld test piece. At least that's how it was for me during testing. I'd say 35-40Amps is plenty for this thickness of metal considering these thick test fixtures do take some heat away.
@weldingtipsandtricks
3 жыл бұрын
D17.1 does not stipulate starts and stops. But companies have the freedom to add stipulations like that.
@nathanmattera6846
3 жыл бұрын
How do i signup on the forum i cannot figure out the security question to signup. And customer service has not emailed me back i have tried to contact the people in charge of the forum and they have not messaged me back its been atleast 2-3 weeks now. I have tried tig torch, stinger, heliarc, and etc and none of them work.
@SpeedDemonExpress
Жыл бұрын
My recommendation would be that you don't weld your plate like this unless they ask you to. I've never been asked to weld it like this. They have always wanted the butt joint welded straight across without stopping. They want to see that you can weld without having to stop every few inches.
@Rayna12Leona
3 жыл бұрын
Yes love it
@timmills9727
3 жыл бұрын
I was looking at a Jattus tig pulse add on. They have an audio clip from your site as if it's an endorsement. But the clip doesn't play to the point where their product is mentioned. I'm curious if you sincerely recommend the product. Thank you.
@weldingtipsandtricks
3 жыл бұрын
thanks for the heads up...I personally have never tried one. thats a clip from the podcast where Jonathan Lewis talked about it a little bit.
@therelentlessredneck5808
2 жыл бұрын
Jody, how do you get such quality welding footage? I'm a new KZitemr and would like to film some welding at some point
@ypaulbrown
3 жыл бұрын
Jody, what the heck, cannot find this on your list of videos, came to me via email.....only 145 views in 15 days, not right.....hope it gets more exposure.....best regards from Orlando, Paul
@weldingtipsandtricks
3 жыл бұрын
Hey Paul, thanks for paying attention. I am trying something different in keeping the video unlisted for a week or two so my email subscribers can see it first.
@ypaulbrown
3 жыл бұрын
@@weldingtipsandtricks Who loves ya Baby.......we do....by the way, your tig gloves are great, I now have two pair.....
@gamelord1000
3 жыл бұрын
Me, watching video: Well, that looks pretty good, I can do that. Me, 20 minutes later: $%^$# you stupid #@@#@%^^^ where did that @#@% how the @#@$%^ ......Gheesh, back to the grinder for the 10th time.... !@##%% I am going for a beer.
@adriangrimaldi8508
3 жыл бұрын
I've been watching your videos for about two years now and I just wanted to know what kind of camera equipment do you use?
@therelentlessredneck5808
2 жыл бұрын
Me too
@negro0523
3 жыл бұрын
Jody is a everlast 255EXT an upgrade from a syncrowave 200?
@weldingtipsandtricks
3 жыл бұрын
not necessarily. having more amperage tho for thick aluminum. I haven't been keeping up with everlast machines for a few years now so i cant really speak to any of their current machines
@waltwinters568
3 жыл бұрын
I have a very small area to shoot a training video while welding. The analogy is a dental hygentist working with 2 tools inside the size of a small mouth. I need to get a high quality video camera inside and not be obstructed by hands, etc. I will also need to add quite a bit of neutral density to knock down the bright light. The camera in some instances will need to curve/bend into place like an endoscope but maintain HD quality-any ideas as to video camera types to pull this off?
@greybeard3759
3 жыл бұрын
Use mirrors!
@guidobrunellijr.3
3 жыл бұрын
got any tips for junk yard welding like some of us do ? :)
@howardgillingham4763
3 жыл бұрын
Pulse turns it into semi auto welding FYI
@a.bakker64
3 жыл бұрын
04:35 ✅👏🏻
@juanvelasquez9114
3 жыл бұрын
guys...how much $ does a welder at NASA?
@stevethomas2882
3 жыл бұрын
Hey Mr. Aerospace any blue and the weld would be rejected!
@weldingtipsandtricks
3 жыл бұрын
On titanium sure. Other metals are allowed discoloration. I never claimed to be Mr aerospace. But I was on the committee that wrote the spec.
@kojomensah7474
3 жыл бұрын
Each one teach one
@lanceschmidt555
3 жыл бұрын
With a Lincoln square wave tig 175 is 3/32 2% lanthanated all you need for aluminum or do you need to go up a size for max amps with this machine
@ItsDdvdd
3 жыл бұрын
Depends on material thickness. 200amps is max for 3/32 in my experience, so you'd have a proportionate setup with what you have. You would benefit from preheating the aluminum for anything thicker than .25" I'd also recommend 2% ceriated for AC, seemed to be the best for me in terms of tip retention. Balls up nice if you flatten it to around 1/16 diameter
@erisvaldojesuspereira3188
3 жыл бұрын
👍🇧🇷
@tylerstrothkamp425
3 жыл бұрын
Comment
@greybeard3759
3 жыл бұрын
Is this channel dead now?
@weldingtipsandtricks
3 жыл бұрын
nope. just working on some other projects so I am not posting as much. new content coming soon
Пікірлер: 100