Hi Justin.. Yeah... If they run as good as they look we're going to be set...👍
@GaryWhipple-q6w
Ай бұрын
Excellent head for a 396 build 😊
@Myersmetalworks
Ай бұрын
For sure !!
@ShawnGilbert1967
3 жыл бұрын
I've ran these heads NA and boosted, the V1 I had needed the vent area opened up and also the oil drain back...otherwise a great head and yes your basically getting fully ported for $1000 cheaper... We even ran them on a 498ci blow the tires off rolling 55mph with 3.55 gears... Also have used some of the larger Rec Port.... I've had good luck out of AFR on BBC...
@Myersmetalworks
3 жыл бұрын
Thanks for sharing and also for the good tips...
@johnparrish9215
3 жыл бұрын
I've got a set of these on a 496 in a boat. The first time I ever nailed the throttle with the boat in the water it shocked the hell out of me, what a holeshot!!!!!
@Myersmetalworks
3 жыл бұрын
Wow... 496 and AFR 265 heads.... I bet that thing is a torque monster... And thanks for the sub!!
@richardsmith-qy6vl
3 жыл бұрын
I ordered a set of these heads in June I was suppose to get them in July I called the other day now I won't get them till October I seen these same heads out flow all the rectangular port heads on a video at Westech and that's what sold me on them it was a 80 horsepower gain over stock heads on a 468 I will be using them on my 427 can't wait till I get them.
@Myersmetalworks
3 жыл бұрын
Hi Richard... I'm like you... All the tests I've read or watched have very good things to say about these heads and even some of the comments posted on this channel of people that have used them have been positive.... Hope you get your heads soon!!!
@davidreed6070
3 жыл бұрын
AFR is a high quality product I've been using them since they were Brownfield heads. Still remember they are mass produced the runouts of the seats are not going to be as close as you would expect them to be.
@Myersmetalworks
3 жыл бұрын
Thanks for the tip...
@philipmazzuca2269
3 жыл бұрын
Excellent choice in cylinder heads- this whole engine was well thought out and really hits home with me. Not sure what your business is for a living but you should be building engines like this for resale.
@Myersmetalworks
3 жыл бұрын
Thanks Philip... Always enjoy your comments... And it sounds like you have a pretty in-depth knowledge of engines yourself... I built some performance engines for people years ago... Also had a flow bench and Sioux valve grinder and seat set and did a lot of head porting and carburetor modifications for people.... That's why I'm so impressed with these heads... But I got out of it years ago, and have been doing R/D Design work for company's I've worked for... Out on my own again and kind of feeling out my new direction.... Thanks for all your input Philip its appreciated...👍
@philipmazzuca2269
3 жыл бұрын
It’s a pleasure watching you. Much respect. I enjoy the talent and time to blueprint and do the things that I value as important in a build. I also am doing a build with that 265 head. Just not sure how big on the shortblock and I have one person in mind who I would want to do the shortblock for me.
@philipmazzuca2269
3 жыл бұрын
What is final compression ratio? Camshaft specs?
@Myersmetalworks
3 жыл бұрын
I'm sure it will be a very well thought out decision, and nice engine for your application.....
@Myersmetalworks
3 жыл бұрын
Compression around 10-1 and camshaft @ 50 Int 242 Ex 248 Cam lift Int .646 Ex .653 Cam is on a 110 lobe separation.....
@CarsandCats
3 жыл бұрын
Great job! Fantastic video and I subscribed. I have never seen a head review like this before.
@Myersmetalworks
3 жыл бұрын
Thanks so much OneFastDuster.... For the Sub and nice comment....
@Motorcitypower1
3 жыл бұрын
W0W..... that was fantastic 👏 👌 😀 You have out did yourself on this one !!! Thanks and please give us the camshaft details and what was the cost to your door ? Again Thank's !!!!
@Myersmetalworks
3 жыл бұрын
Thanks Mike.... Its appreciated.... The cam shaft is a Comp Cams Part # 11-771-8 Its a cam I picked out myself for the the conditions and intent of the car it was going into... Its always best to call Comp Cams with your combination and intent of use for their expert advice... I don't remember the cost at the time of purchase... You could go to Comp Cams Web page with the part # 11-771-8 to get current pricing...
@Sigforty40
3 жыл бұрын
Looks very much like the build I did. I’m planning to dyno mine in a few weeks.
@Myersmetalworks
3 жыл бұрын
Wow Mark..... looks very nice and good luck at the Dyno....👍
@ronaldlewis4032
2 жыл бұрын
Thanks for sharing I bought the AFR 325 and a Super Victor then had them checked and fully ported,He cut the intake into at the middle to port like he wanted,,I have a 505 ci engine I may have to much head ,I may order a block and make a 565 ci for these heads to work, he recommended a 1350 cfm carburetor, Self Racing, Kevin did a great job, He did these heads about a year ago I got to get going! Subbed for future videos
@Myersmetalworks
2 жыл бұрын
Wow Ronald ... Sounds like your going to have a very high hp engine.... I looked up (Self Racing) and looks like they are a top Engine Performance Shop... Good luck with your engine and thanks for the Sub...👍
@ronaldlewis4032
2 жыл бұрын
@@Myersmetalworks I have do business with them for years and sad to say covid caused Kevin and Glen to pass away, Great family,y car is fast with the current 496 and Pro comp heads and if I install the new heads they claim I'd pick up a 1/2 second, I run 567 @ 123 on my last pass and I'm getting a little old to be going much faster! I just let it idle and deck it on foot brake,ofcourse it has a pro brake but the 496 is a fresh build and I shift it @ 6600 rpms, I running a large Howard's Roller cam that will really perform if I'd turn it up ,it's got all aftermarket bottom end and I wouldn't be scared to buzz it up but heck foot braking what's the use!LOL
@bktk8
3 ай бұрын
Watch your pushrod to pushrod guide clearance. I broke two using scorpion 1.8 rockers.
@Myersmetalworks
3 ай бұрын
Thanks for the Tip and your veiw....
@richardsmith-qy6vl
2 жыл бұрын
I have the same heads on my 427 60 over so it's a 440 and a howards 235×241 duration @50×618 lift lsa 108 and I used a victor Jr intake with a Holly 850 hp I'm hoping for 550 hp. Next I will be building a 496.and I'm going to try to make 700+ hp on the street. Great video
@Myersmetalworks
2 жыл бұрын
Hi Richard, Thanks for the nice comment... Sounds like you have chosen some good components for that 427 to get to the numbers that you would like... I just like the way 427 sounds 😀 And good luck on that 496 Build....
@richardsmith-qy6vl
2 жыл бұрын
Fddo you think with the cam shaft I have its a howards 235x241@50 618 lift I can make 550 hp or do I need to go up in camshaft like 248 x 255 any help would be appreciated thanks Rick427
@Myersmetalworks
2 жыл бұрын
Hi richard... More duration usually will help give you a higher HP number... But its hard for me to say for sure what size camshaft the engine would need to hit those numbers you'd like to hit.... To me its about a good combination of parts working together that give good HP Numbers.... You have good heads... Sounds like a good intake and I like the cam you have chosen for it and if your compression is pretty healthy It sounds like it sould be pretty close to the numbers you would like.... 👍
@georgesviderski2469
2 жыл бұрын
What compression pistons dude? Im building similar engine but with 110 lobe cl angle
@richardsmith-qy6vl
Жыл бұрын
Hey by the way we dynoed my 427 and I got a big surprise the motor made 112 hp more then what I was expecting it made 661 hp and 605 torque at 32 degrees of timing with a 950 cfm carburetor on it I'm a happy man.
@hybridmusclegarage4590
3 жыл бұрын
OOHHHHH, YEEAAAAA!!!!! This is gonna be one NASTY motor.
@Myersmetalworks
3 жыл бұрын
LOL....You crack me up HMG.... Thanks....👍
@pbettselectric134
2 жыл бұрын
Very nice presentation!
@Myersmetalworks
2 жыл бұрын
Thank you very much!
@bradnavratil5502
2 жыл бұрын
Fantastic job! Thanks for the info...I wonder if they would work with a 871 Blower ??
@Myersmetalworks
2 жыл бұрын
Not sure....
@joesmith306
3 жыл бұрын
The intake ports look like the roval ports on the edlebrock heads.
@aaronbollhoefer8465
3 жыл бұрын
Been waiting on this one!
@Myersmetalworks
3 жыл бұрын
Thanks Aaron...
@alvaroapache
2 жыл бұрын
How beautiful
@Myersmetalworks
2 жыл бұрын
Thank you!
@djrowe10
3 жыл бұрын
AFR is the best hands down. Can you let me know the brand name or part number of your valve compressor tool. I like the way it looked to work so easily. The pneumatic compressor I use belongs to the shop so I want something extra for my home garage. Thanks.
@Myersmetalworks
3 жыл бұрын
Very happy with the choice of AFR. Don't know if you are familiar with "Nick's Garage" channel, but he dyno tested a 454 with those heads, if interested... I have had this compressor for 25-30 years and it was used when I got it, so I don't know if they still make it or not. But it's by K-D Manufacturing Co.- Part #308. Don't know if the company still makes this one anymore. Hope this helps.
@djrowe10
3 жыл бұрын
@@Myersmetalworks I watch Nick's garage dyno channel and will have to look for the 454 heads. I am considering the AFR enforcer heads unassembled to build for my next 454 build. I usually port 781 GM heads for street builds. Thanks for KD number.
@djrowe10
3 жыл бұрын
@@Myersmetalworks KDT #380 is compressor tool new number. Thanks.
@davidtolson4804
3 жыл бұрын
I just watched something no engine builder shows in their vids.
@Myersmetalworks
3 жыл бұрын
😬
@sc358.
Жыл бұрын
Playing with light and fire 😂😂🔥 Autolight 🤔🤷♂️ Brisk/NGK 👍 Was gonna ask ya about those rockers. Haven't used em but sounds like ur new to them as well. Got my Dad a set of ultra pro magnums for his mild 496. Think I may end up with a T&D setup - bushed. Not sure just yet.
@miguelceja9038
2 жыл бұрын
I need someone to build me a 600 hp 454 for my 90 454 SS anyone available ?
@Myersmetalworks
2 жыл бұрын
Hi Miguel.... Look up on youtube (PERFORMANCE ENGINE BUILDING 201) I think his engine shop name is TRRC.... He would be a good choice for your 600hp 454 build...
@georgesviderski2469
Жыл бұрын
I checked out many of your videos.. great goals and objectives. But gadamm Please change the music. It is aweful and takes away from your vocal effectiveness. Thanks godspeed.
Пікірлер: 60