Please note, this is the sample gun we received from GHK, The sample could be checked and prepared by the manufacture. In this video, all the feedback and comments are made based on the prepared sample, Please only use this video as a minor side reference, before you make the final purchase on this airsoft gun. We have no control to the QC and the production, however we can show you what we got inside the box.
@PeterPing
11 ай бұрын
Thank you Tokyo Marui for forcing GHK to makes a new AKM.
@4UADSmartAirsoft
11 ай бұрын
Hahahaha thanks Marui!
@sogerc1
11 ай бұрын
Very well put!
@Slmf_skambo
11 ай бұрын
This AKM seems to be a strong contender against the Marui!
@Sire.English
10 ай бұрын
Wait so how/what did Marui do to make GHK Redo it? What's the backstory 😅
@malcolmgough9971
10 ай бұрын
@@Sire.English it became really obvious to the world how shit GHKs are when the TM was released. Apparently building a straight AK that doesn't crap out is totally possible... who knew!
@RenyiTsunami
11 ай бұрын
今天下單加上看完評測我得說:這好東西值得擁有,不買對不起自己!這AK實在是太香了⋯⋯
@4UADSmartAirsoft
11 ай бұрын
錢都是這樣不見的
@wilson01131
10 ай бұрын
@@4UADSmartAirsoft錢沒有不見,只是變成喜歡的東西
@Love-Mexico
4 ай бұрын
這把槍有空艙掛機嗎
@hjs0988
24 күн бұрын
彈道不怎麼樣
@BadaBingPictures
10 ай бұрын
Excellent video, and the V3 looks like it blows the V2 away in its refinements. Thanks for your time in making this initial review. Haha, cat hair everywhere. I know exactly what that’s like!
@4UADSmartAirsoft
10 ай бұрын
Hahaha cat hair is crazy not gonna lie, but yah man anytime! Glad you like the video, and thank you for the awesome videos too!
I've never had any interest for GBBRs, even with the extra fun factor. I've always thought AEGs as more capable, reliable, cost-efficient and consistent (especially since I can tech them to my liking). I know Marui makes a good product, but still I know too much GBBR users that have had to call it quits in the middle of a game. Also living in a Nordic country the summers are short. This has piqued my interest to finally buy a GBBR. Those chrono readings were really steady and gawd dayumn that range is good ootb. I wonder what would happen with an aftermarket hop-up and nub. Are you going to make a video about modifying this thing? Apart from external upgrades, the only thing that might be worth trying out performance wise is some different barrel + hop-up combinations.
@4UADSmartAirsoft
10 ай бұрын
I think in the future we might do it
@2lbsTrigrPull
8 ай бұрын
/watch?v=6RaVHILODZU
@A10OP
11 ай бұрын
that Iraqi reload though - *chef kiss😘
@4UADSmartAirsoft
10 ай бұрын
hahaha thanks man
@heiliger_sturm
11 ай бұрын
Since apparently this has a 1:1 receiver to real AKMs, is it a high probability that original Izhevsk AKM furniture will fit without modifications? I also noticed this new version has the rear sling swivel at the bottom of the stock, instead of the side. This is indeed the most common position of the rear sling swivel for most laminated AKM stocks made by Tula and Izhevsk. Only late production (1974-1977 maybe) AKMs made by Soviet arsenals had side sling swivels.
@4UADSmartAirsoft
11 ай бұрын
Very accurate man haha amazing observation
@fizzleshizzle8314
10 ай бұрын
@@4UADSmartAirsoftso does it take the real steel AK parts or not?
@EcchiRevenge
10 ай бұрын
You could always sand real furnitures to fit airsoft guns, AEG too.
@planetcaravan2925
10 ай бұрын
Apparently? Proof? 😂
@heiliger_sturm
10 ай бұрын
@@planetcaravan2925 I said ‘apparently’ because I don’t know for sure that the receiver is 1:1. I’ve only seen it advertised as being 1:1, hence the word choice.
@911VIPER
7 ай бұрын
Man! Your reviews are always very helpful in purchasing good products!
@4UADSmartAirsoft
6 ай бұрын
Will try our best to help! Thanks for your support!
@RoelTheWorld
Ай бұрын
In this case it wouldn't be, though. As it turned out to be garbage.
Love the content! Did it seem like any of the QC issues that plagued the V2 are still present? That's the main thing keeping me from getting one...
@4UADSmartAirsoft
11 ай бұрын
So far based on what I got, Ghk produce their own parts now, they no longer buy parts from LCT, so I’m guessing maybe the quality control will improve. But still the one I got is a sample gun, and fingers crossed when it comes to the production version.
@tankoftheday7679
11 ай бұрын
@@4UADSmartAirsoft appreciate the info. Hoping for the best!
@4UADSmartAirsoft
11 ай бұрын
@@tankoftheday7679 anytime man good luck
@MargiAirsoft
11 ай бұрын
Damn, I missed the premiere but still a nice review ! I'm really impressed with the range out of the box
@4UADSmartAirsoft
11 ай бұрын
It’s a performer out of the box (the one I got) fingers crossed when it comes to the production. And still thanks for watching this episode man!
@MargiAirsoft
10 ай бұрын
@@4UADSmartAirsoft Thank YOU 😊
@eason.h9854
11 ай бұрын
好喜歡你的影片,梗好多.已圈粉🥰
@4UADSmartAirsoft
11 ай бұрын
哈哈哈謝謝啊感謝支持我們繼續努力
@ricfam2198
10 ай бұрын
A lot of cool improvements. I wonder with the new dry fire mechanic on their updated mags that they have fixed the issue of the mag lips being too tight.
@4UADSmartAirsoft
10 ай бұрын
I'm sure they did
@pacmanosaurus1971
10 ай бұрын
Hopefully they will renew their entire lineup. I want an AK105 so bad😭
@4UADSmartAirsoft
10 ай бұрын
yah I'm looking forward to it as well
@msgtvarela
10 ай бұрын
I’m hoping they make a V3 aks74u
@davidqr7089
10 ай бұрын
me too dude
@guilhermedealmeida9360
10 ай бұрын
first thought I had
@alexzloy1009
11 ай бұрын
Nice job,guys! I just finished tuning V2 and they released V3, ahhhh!🤣
@4UADSmartAirsoft
10 ай бұрын
Dude that really sucks man haha but keep the V2 I bet its a laser gun
@xiongsihui
10 ай бұрын
same
@ABSTRACT278
11 ай бұрын
LET'S GOOOOOO. 4UAD IS BACKKKKK
@4UADSmartAirsoft
11 ай бұрын
We are here all the time :)
@ltribley
8 ай бұрын
There should have been a review whether or not the receiver is accurately reproduced to the standard 1, or 1.5 mm AK, including locations of rivets, X Y markings, etc. It does not have a side sight mount making it unattractive to most serious users. A gunsmith could add one if we knew the receiver was an accurate reproduction.
@asa14147
11 ай бұрын
這把AK真的很讚 連我這個AR控都想要收一把來玩玩😂
@4UADSmartAirsoft
11 ай бұрын
蠻可以收的~~~
@J1m._.
5 ай бұрын
6:12 氣化是真厲害。 聽說5月底DDM4 PDW V3會出來,期待評測
@4UADSmartAirsoft
5 ай бұрын
哈哈哈哈我也在期待~~
@TehSnake586
11 ай бұрын
Exelent review. Thanks folks !
@4UADSmartAirsoft
11 ай бұрын
Anytime man glad you like it!
@MrFROGY1313
10 ай бұрын
Modify predator orange bucking with modify gbb barrel. Believe me you wont be disapointed
@anonymousnoone77
11 ай бұрын
Looks nice. Thanks guys 💪❤️👍
@4UADSmartAirsoft
11 ай бұрын
Thanks man! Anytime
@NanardPC
10 ай бұрын
Thanks for the review :D
@4UADSmartAirsoft
10 ай бұрын
Anytime man
@julmank
10 ай бұрын
Excellent video. Do you think GHK will also launch an improved version of its AK-105?
Ok so... how could this video be honest (unbiased) if it's sponsored by GHK... where's the 4UAD Grading System? The GHK AK which was released around 2012 as we know it... is version 2 Version 1 was an AEG conversion from a Dboys AEG
@4UADSmartAirsoft
11 ай бұрын
Currently As mentioned we are running short handed to produce GS and why can’t we be honest if we are sponsored? And what’s the point to lie to you guys?
@commiebearairsoft859
11 ай бұрын
@@4UADSmartAirsoft there's no lies, but some design quirks of the GHK AK remain which was not mentioned in the video either because there's an agreement with GHK or other reasons I won't delve into... I'll say it since I'm independent. - Magazine backward compatibility. The fact that they're backward compatible and from the design of the FCG it would appear that GHK retained the same empty-magazine cutoff system, something that most v2 owners have stated as a big peeve. Yes, if they redesigned the magazines similar to the Marui it would make the old mags redundant but there was a missed opportunity to be the most realistic GBBR AK. +1 for lazy retool from existing FCG - Magazine core still using zinc alloy, long term review video would probably see that locking lug get worn in and subsequently run loose in the magwell. - 2p trigger, which another commenter also mentioned below. GHK could have made a 1p trigger as part of the overhaul so that we could have that (subjectively) more responsive trigger. +1 for lazy retool to reuse the existing trigger from v2 GHK AK - Selector seems to be a 2p, someone noticed that there's a screw thread in the selector paddle. +0 on this one since existing fire selectors for the v2 GHK AK might be compatible, realists would probably put in a real selector regardless - Piston guide also 2p, more parts recycled from the v2 GHK AK As some commenters have mentioned, Marui is probably the biggest driving force in GHK's update to the v3. Some mention of its competitors would have been nice but again, probably not gonna happen.
@pyker1000
11 ай бұрын
Me after the ballons popped : i wished he tried 0.48 to see the hop up effectiveness. You just read my mind you genius xD
@4UADSmartAirsoft
11 ай бұрын
It’s a must man hahaha
@xkdlxkslr57666
11 ай бұрын
하나 사볼까싶네요 저렇게 스틸을 많이 써도 작동성이 좋네요
@4UADSmartAirsoft
11 ай бұрын
Yah not gonna lie it performs pretty well out of the box
@jameslyons1978
11 ай бұрын
Now, tactical folding stock, shorten the front end and get a rail on there..
@4UADSmartAirsoft
11 ай бұрын
Hahaha I’m wishing too
@stewbacca117
10 ай бұрын
Be a man, just run 0.48s as standard 😜😉🍻 I might finally have to get my hands on an AK GBBR at this rate... Still something I've never had in my collection as yet. 🤔
@4UADSmartAirsoft
10 ай бұрын
dude you are going to look sooooo sexy with an AK haha gogogo
@bill6385
11 ай бұрын
請問您,最後測試彈道時,是用原廠hop皮嗎?還是如影片前段中您換成marui hop皮?
@4UADSmartAirsoft
11 ай бұрын
原廠的喔~沒換
@hank8293
11 ай бұрын
Now Marui is dead. The king is ghk 🎉 Ghk's ak and Glock are perfect. Taiwan number one ghk ❤❤❤
@4UADSmartAirsoft
11 ай бұрын
Fingers crossed when it comes to production, Marui is pretty amazing when it comes to their quality control
@wangmcmillan7011
10 ай бұрын
Damn this recoil look awsome, now I'm thinking should I sell my GHK RPK and chenge to this AKM....
@4UADSmartAirsoft
10 ай бұрын
this one for sure
@劉柏漢-c7j
9 ай бұрын
intro很用心😂
@JedociderShou
10 ай бұрын
I miss the classic 4UAD grading system 🥺
@4UADSmartAirsoft
10 ай бұрын
So do we, and we are still working our way out to bring it back
@JedociderShou
10 ай бұрын
@@4UADSmartAirsoft noice. I'll be waiting 👌
@andychu4480
10 ай бұрын
The Angel King!
@Suli5241
11 ай бұрын
Is GHK rising up again, after the pandemic QC downfall?
Mite get an ak soon or nxt yr. Want to kno where acetech grenade not on belive pack seperate in uk
@zagmeher8941
6 ай бұрын
Then you confirm that is impossible to add an NPAS in this new AKM Ver. 3??
@4UADSmartAirsoft
5 ай бұрын
Because RA tech only had the version 2
@chienchengchi1427
11 ай бұрын
嘿兄弟!請問GHK也會讓AKMS也換上這次的系統升級(V3)全行程槍機、鋼火控嗎?
@4UADSmartAirsoft
11 ай бұрын
應該已經在進行中了
@chienchengchi1427
11 ай бұрын
@@4UADSmartAirsoft 謝謝你的回覆
@oxboclan3633
11 ай бұрын
BRO can you do a modification vidéo of this master piece PPPLLLZZ !!!
@4UADSmartAirsoft
11 ай бұрын
Hahaha if I can get the parts yah I will do it haha
@daito5824
10 ай бұрын
I got a in used ghk ak74 2019 version and every month something else broke , new parts had to be ordered off samoon and it takes 3 weeks to arrive bc it comes from Taiwan I now switched to mws
@4UADSmartAirsoft
10 ай бұрын
yah if I were you I will do the same haha
@Noise-fe6dp
11 ай бұрын
I don't know much about gbbrs, why couldn't you fit a NPAS in the new one?
@4UADSmartAirsoft
11 ай бұрын
The size is different from the old npas and I guess the new one must be on the way
@cx3264
8 ай бұрын
andrew测试时下意识的拉了一下拉机柄 以为是ar😂
@4UADSmartAirsoft
8 ай бұрын
我真的很常這樣
@maddragon3457
11 ай бұрын
Im not sure just by looking at it, but can you put a version 3 bolt(with the new nozzle ofc) into a version 2 gun, or the sizes are too different?
@4UADSmartAirsoft
11 ай бұрын
It’s longer and it won’t work
@facundocorradini
10 ай бұрын
4:45 does it have the real AK "click" on empty like WE's, or still just a dead trigger on empty as previous GHKs?
@4UADSmartAirsoft
10 ай бұрын
Its on the way
@蘭克
11 ай бұрын
上蓋長度不同 是不是連槍身長度也不同呢? 另外hop座與外管是否顆裝入前一代的呢?
@4UADSmartAirsoft
11 ай бұрын
完全無法喔
@leoviolette3765
11 ай бұрын
I need the new ak74 version
@4UADSmartAirsoft
11 ай бұрын
I bet it’s on the way
@dariodeak
11 ай бұрын
It looks like the internals are w&s steel aftermarket parts. I suspect fully interchangeable with the V2 version. One piece trigger is better from the V2 options or even the single hook trigger
@4UADSmartAirsoft
11 ай бұрын
It’s all made in house by Ghk
@Holanduzo
11 ай бұрын
Of course you can put an NPAS to the nozzle, easier than you think
@4UADSmartAirsoft
11 ай бұрын
I mean to fit the old one into the new one, otherwise I can make my own npas :)
@Holanduzo
11 ай бұрын
@@4UADSmartAirsoft just a grab screw and a little driller, and works super
@AirsoftPanamaOficial
2 ай бұрын
How come this video states V3 is awesome and all others say its not good.
@4UADSmartAirsoft
2 ай бұрын
Long in short, the sample was good, but seemed like the production had some problems
@Jerry楊
23 күн бұрын
Because every time a product is made, there are often tolerances between parts. If the tolerance is not large, it will be a good gun, but if the tolerance is too large, the gun will malfunction, and the tolerance of GHK's gun Problems arise very often.
@aldouslau8722
10 ай бұрын
The most important is the hop up still shitty as usual? If so no points to get a comestic GBB with bad shooting experience. We need reliable GBB on fields without spending extra cash & time to fix any internal issues. Tested few shots doesn't means the hop up has much improved
@4UADSmartAirsoft
10 ай бұрын
Or what else do I suppose to do? Would you watch a 5 hour video of me shooting the same gun? I’m happy to provide you the footage
@aldouslau8722
9 ай бұрын
@@4UADSmartAirsoftAfter 10 years, GHK announced the AK has defects and need distributors to affix and wait for additional parts to solve the problems. A toy over USD 320 but GHK still launch defective goods to the market 🤣🤣🤣
@Pulxie
Ай бұрын
nice its very nice but when stock up
@SupraTompan
10 ай бұрын
Hahaha, master class intro.
@4UADSmartAirsoft
10 ай бұрын
hahaha this one is one of my favorite XD glad you like it too
@Nicolas-bo9ps
10 ай бұрын
Very Very Very… beautiful
@chayze3009
11 ай бұрын
Is there a chance that it is out already?! My local airsoft store had GHK AKMs in stock for a few weeks now. And I'm really, really confused how that's even possible 😮
@HAMASSPIGS
11 ай бұрын
Good Question boet
@ThatGuyIvory
11 ай бұрын
Nope, release date is late November on Samoon's website. They have the old gen in stock.
@machonacho95
11 ай бұрын
Those are just V2 ones that they probably ordered months ago. The last batch of V2s was produced earlier this year.
@chayze3009
10 ай бұрын
@@machonacho95Thanks, good to know! I was very tempted to get one, when I noticed those. But now I'll wait for sure
So with it being 1:1 with a real ak, would it accept real ak parts?
@4UADSmartAirsoft
10 ай бұрын
Yep will take it all
@philmak5830
11 ай бұрын
What abt the gas efficiency on half travel and full travel, wish theres a comparison of performance on the two different buffers
@4UADSmartAirsoft
11 ай бұрын
The one with the half travel will perform slightly better due to the faster cycle rate
@facundocorradini
11 ай бұрын
@@4UADSmartAirsoft that's not correct. Gas consumption will be exactly the same, as the firing pin will disconnect at the exact same point of the bolt travel. If anything, the faster RoF will mean slightly worse cooldown
@4UADSmartAirsoft
11 ай бұрын
@@facundocorradini I’m theory that is correct, I said it because it happened on this one, so I will try my best to pass on all the information I get from this gun. And when it goes to production, I’m sure some guns may perform differently.
@philmak5830
11 ай бұрын
@@facundocorradini given how GhK AK platform had better performance in half travel even with steel upgrades, now that V3 comes with full travel option. Wonder how it performs
@gincrystal7756
11 ай бұрын
其實從桌子量到布幕才60米左右而已
@4UADSmartAirsoft
11 ай бұрын
咦怎麼每次大家量都不一樣
@小虎-m8l
11 ай бұрын
感覺後座力很讚😂
@4UADSmartAirsoft
11 ай бұрын
炸
@AbdulAlrahman-u9x
8 ай бұрын
Bro i want buy akm plz tell me which one the best ❤❤❤ plz answer me ❤❤
@4UADSmartAirsoft
7 ай бұрын
currently if you live at a place that is harder to get airsoft guns I would recommend Tokyo marui Ak, since its got least QC problems. GHK is good but currently V3 needed sometime to fix the QC issue. hope this helps in some ways.
@SkinRanger
10 ай бұрын
can they now release the glock gen 5 pls.
@4UADSmartAirsoft
10 ай бұрын
I bet its on the way
@Colt.trautmanairsoft-cb9fi
10 ай бұрын
Got other version tm akxx
@sogerc1
11 ай бұрын
Anybody knows how to fix the f*cked up trunnion in the old version? I'd need to back out the outer barrel like 1 cm or so to be able to put in the ML alu hopup. I can force in the factory plastic hopup but it's so twisted it provides almost no hop effect. What if I would cut off that 1 cm from the outer barrel's thread so I wouldn't have to screw it in so much? I should've sent it back when I bought it, it's just that I didn't realize it had a f*cked up trunnion because it didn't feed and I spent a really long time fixing the feeding issue (including getting DH feedlips).
@4UADSmartAirsoft
11 ай бұрын
I think the cause is the outer barrel pushed your hop up unit, it pushed it so forward that it starts to mess around with the feeding, I had the same issue and took me a long time to fix it. My method was not to screw too tight and when you screw in the outer barrel you have to try to find the sweet spot, have ti test it a few times. Not too forwards not too backwards. I tired my best to explain, hope this helps
@sogerc1
11 ай бұрын
@@4UADSmartAirsoft Yes, but that was not my problem, the feeding was the mags' fault, Pablo's feedlips helped but I still needed to do additional padding and filing here and there. My problem with the trunnion is that the hopup unit does not line up with the outer barrel, if I look down the barrel I can see that the hopup sits higher, so if I force in the OEM plastic hop the barrel is pressed down because the pastic flexes but I can't even put in the ML hopup, the aluminium has no give. But the OEM is no use either because the barrel is pushed away so there is barely any hopup effect. People usually give the advice to unscrew the barrel one turn but that doesn't do anything for me, I need to unscrew many-many turns, about 1 cm in length and then the rear sight post is so forward I can't even put on the top cover and the top handguard. That's why I thought I cut off from the threaded section of the outer barrel so it doesn't have to go in that much, is that a good solution? Have you seen such a case?
Пікірлер: 421