This thing is very expensive but it do work...big difference in sound.
@andrewdallas5674
2 жыл бұрын
Have had this issue on my 07 335i for a while without resolution. Excited to give this a go.
@dennisperez9457
4 жыл бұрын
installed my kit today, money well spent. Thank you!
@friguy4444
2 жыл бұрын
I have a 2008 (Built in April) 335XI and I have just put in a pair of new 17T turbos. I started hearing this rattle at certain rpms. Usually when first starting and driving slowing to a stop. I thought one of my new turbos was possibly bad. But I wasn't getting any other symptoms of it except this rattle that to me sounds like a housing wheel rattling in the turbo. But thanks to this and other videos like it I am greatly relieved at BMW's incompetence in making the exhaust system LOL. Thanks!!!
@andreyayrapetov
5 жыл бұрын
By the way, I ordered this for my E93 335i and works great. I then started to have same issue on my X6M and this will work with slight mod.
@thepianoman007
6 жыл бұрын
I just fit in on e91 and it works great. I dont even mind the price - still cheaper than stock or any better rear exhaust for it - but the shipment costs are just crazy. If you wanna bring it to EU and you dont have any relatives in US its just way too much. Even with a discount you still can ship it cheaper. Then again.. thanks for helping me to get rid of this shitty rattling noise. I am happy now ;)
@gtech6
6 жыл бұрын
I love this product/solution, almost bought one, only one issue and that is you guy's calculate more shipping costs (124dollar) than the product itself actually costs while it fits in an enveloppe
@AGATools
6 жыл бұрын
Please contact me at Rich@agatools.com, I will be able to help with shipping.
@seanpaul3050
4 жыл бұрын
Just compress the 16mm outer flange very slightly with a G clamp. Just enough to remove the free play.
@haanshagnasty6974
4 жыл бұрын
Mine still rattles a bit but not nearly as bad thank you so much!
@andrewr1988
3 жыл бұрын
Same, with catless downpipe and muffler delete, mine still rattled a little bit
@Delusionn
6 жыл бұрын
I’ll buy you’re kit, but not for 119$ man. Make it somewhat affordable
@AGATools
6 жыл бұрын
Material cost isn't cheap, along with heat treating process, we made this repair kit as cheap as we could. With that being said, once you use our repair kit, you will see the value of not having to hear that obnoxious sound any more!
@Delusionn
6 жыл бұрын
I have no doubt it works, but for even 99$ and free shipping I would be hopping right on it. I understand it may be expensive to make, but I think you are shooting for too high of a profit margin.
@stevepake2108
6 жыл бұрын
BMW just quoted me $1270 to replace left side exhaust, and the only issue is this rattle! I'm like GTFO! I know about the golf tee mod and other stuff, but this looks much better and maintains the functionality of the exhaust for 1/10th the repair cost. Engineering costs plus parts that will handle hot exhaust and huge temperature swings won't be cheap. It's worth it to me. Will be ordering soon.
@Saif0412
6 жыл бұрын
AGA Tools is the not available for E90 335i 2007 ?
@AGATools
5 жыл бұрын
@@Saif0412 It will fit
@arashmohtadi1603
10 ай бұрын
Works super well!!!!
@jyotiguin1007
6 жыл бұрын
Thats an E93. E92 is the coupe and E93 is the convertible. This fix works for both.
@jfit771
4 жыл бұрын
The only part that is most costly is the brass boot. All other parts are penny’s on the dollar. The per unit manufacturer cost on the brass boot can’t be more that $25 if that. Avoiding this repair kit and just keeping the valve open via alternate means can work with no material affects on performance despite what some say. You will just have louder exhaust note.
@seanpaul3050
4 жыл бұрын
Wrong - leaving it open all the time affects the torque of the engine at low rpm's. The car will run like crap at low engine speeds and the gearbox (if automatic) will not change quickly enough. Deleting the rear muffler will do the same. It will sound nice for sure, but sadly it will not perform better. BMW put the flap there for a reason. Creating back pressure at lower revs increases the power and torque of the engine at those lower engine speeds. This is also why some BMW's have disa flaps in the inlet manifold. Opening and closing those flaps at certain engine speeds increases power and torque.
@jfit771
4 жыл бұрын
Sean Paul well I’ve been running it with no issues for two years. No performance issues at all. Also BMW tech has confirmed with what I described. You sound like you know what you’re talking about but I haven’t experienced it in reality.
@JuZe77
4 жыл бұрын
@@seanpaul3050, the back pressure AKA higher exhaust gas velocity (due to a smaller diameter exhaust tubing, in oppose of low flow restrain and higher diameter tubing) is needed in N/A cars, when trying to improve the scavenging of exhaust gasses from the cylinders in low RPM's. But... In cars with turbo, the back pressure is ONLY a bad thing, in every RPM. As a turbo works because of the pressure differential before and after the turbine, it is essential to try to maximize that pressure difference by as low restriction exhaust system as possible. So, the flap in this car is only to manage the noise level in cold starts, and in low RPM's (exhaust drone can be a problem to some in 2500-3000 RPM range, if the flap is open all the time). There is no other need for that flap, period. Even this video is flawed, stating that the flap has anything to do with power or torque output in low RPM.
@seanpaul3050
4 жыл бұрын
JuZe77 at low rpm your turbo is doing nothing
@JuZe77
4 жыл бұрын
@@seanpaul3050 why is that..? Because there is not enough pressure differential... So why make the situation even worse with "back pressure"? And I don't know, what kind of turbos You are running, but my n54 gives plenty of boost even in 1500 rpm. So should there be more torque under that with restrictive exhaust..?
@JoseDiaz-is7yj
Ай бұрын
Can these solve the rattle for a X3 F25 2017???
@chris323i
7 жыл бұрын
RIP to those with the golf tee mod
@Aiden.1.1
Жыл бұрын
Lol
@Aiden.1.1
Жыл бұрын
But what’s the effects of the golf tee mod?
@alanpastman5500
Жыл бұрын
Will this work for my 2007 328xi coupe?
@princemaisela7907
7 жыл бұрын
bmw f20 2012 118i, have the same problem, it started yesterday...
@fernando3354
3 ай бұрын
Can you do e93
@JohnTorreyblahblahblah
2 жыл бұрын
Is there no exhaust rattle fix kit for a 2013 F30 335i Xdrive that makes this horrible sound at startup?
@autodjelovi2092
Ай бұрын
Do you have for n62 engine?
@imonurgoat
6 жыл бұрын
How would this be different if I just took something else to keep pressure? And I also think the shipping is over priced.
@AGATools
6 жыл бұрын
You would need something that keeps it open or closed in order to allow proper pressure. You will still need to find a housing to keep the shaft and pin from rattling. As for shipping, where are you located?
@dstiteler
5 жыл бұрын
Set up looks similar to my '08 E61. Is this setup compatible?
@jarkoos2
6 жыл бұрын
Hi, will it fit a 2011 E93 335i? Would be happy to order it, but I live in Switzerland and shipping cost on your website is 141 USD! Could you provide some reasonable overseas shipping options? The repair kit fits into an envelope, why not using simple postal service for this? Thanks
@dvv3122
6 жыл бұрын
I have the same problem for my 2013 328i, do you have a product for that?
@AD777
5 жыл бұрын
Strong enough against mhd burble tune? 😊😄
@akilattar3664
4 жыл бұрын
Can you please check the noise in my car it is a bmw x6 , i have a video that shows my case .
@Mersim44
5 жыл бұрын
does the kit includes this bronze silicone liquid ?
@AGATools
5 жыл бұрын
Yes it does.
@andyludwig5595
6 жыл бұрын
Can it fit a 2011 e90 335i xdrive? Thanks!!
@AGATools
6 жыл бұрын
Andy, sorry but this will not work for your vehicle.
@blessedhands2000
5 жыл бұрын
Will this work on the BMW 328i?
@AGATools
5 жыл бұрын
Hi James, I am sorry but it will not fit onto the 328i. This only works on the 335i from 2007 to 2011.
@lucatonipeperoni
3 жыл бұрын
Does this work for an f21 m140i ? Exhaust (Flap) seems pretty much the same.
@AGATools
3 жыл бұрын
I am sorry but it does not.
@anthonyc6377
6 жыл бұрын
Hi, will this work on a 2011 335 xi, E90?
@AGATools
6 жыл бұрын
Hi Anthony, yes it will.
@thoughtwavetech
5 жыл бұрын
Hey will this fix the rattle on my 2008 335i? (E90)? It is the rattle that goes for about 30-45 seconds and then cuts off. It sounds like a waste gate rattle but I bet it is this instead. I am actually getting my left exhaust replaced right now since I was rear-ended so hopefully this will fix it.
@AGATools
5 жыл бұрын
Hi Jonathan, yes our kit will work on your E90. What's happening is once your car has warmed up, it doesn't open and close the butterfly valve anymore, so the rattle goes away. This repair kit will make the rattle go away. But because you are getting a replacement exhaust, that rattle should be fixed. However if it does go back, give us a call. We have your solution!
@chrisgarret3285
5 жыл бұрын
@@AGATools if it doesn't open and close the butterfly valve anymore once the car is warmed up? I thought it opened and closed at low RPM to adjust back pressure and performance in the process?
@AGATools
5 жыл бұрын
@@chrisgarret3285 Depends on if vehicle is warmed up or not. Some of our customers do not hear this rattle anymore once the vehicle is warmed up. However, some people let it go like that for too long and the rattle gets worse over time to where regardless if the car is moving or stopped, cold or warm, the rattle is REALLY loud.
@killingsp115
3 жыл бұрын
Just bought your product. Doesn't work. Installed it exactly like you did in the video
@xxSymptomz
5 жыл бұрын
Does this fit an 09 e90 335i?
@jessec4240
7 жыл бұрын
What about for a bmw 328i xdrive ??? 2013
@jessec4240
7 жыл бұрын
Does it Work
@AGATools
7 жыл бұрын
Jesse, I am sorry but it will not work for the 328i.
@Aquillar
5 жыл бұрын
I don't think the 328i even has this kind of exhaust?
@roberto0612fcb
3 жыл бұрын
Total cost to make in China = $3.00, Slaps AGA logo, increase the price to over $100 😂 damn that's some good profit.
@AGATools
3 жыл бұрын
Our kits are made in San Diego, CA. Definitely not Chinese made!
@said7776
5 жыл бұрын
Can fit e90 323i LCI 2011?
@AGATools
5 жыл бұрын
Sorry buddy, it will only fit 335i
@limon376
4 жыл бұрын
Is it works for 2008 e90 316i
@AGATools
4 жыл бұрын
Hi Limon, it will not work on the 316i.
@limon376
4 жыл бұрын
AGA Tools thank you for getting back to me .👍
@mohamedaboziad9976
6 жыл бұрын
How much
@raymonddoss4950
6 жыл бұрын
Hi does it work for E46 2002 330i ??
@AGATools
6 жыл бұрын
Raymond, I am sorry but it does not work for an E46.
@raymonddoss4950
6 жыл бұрын
Thank you for the prompt reply
@GODALMIGHTY85
7 жыл бұрын
How can I buy? I have this problem on a 2011 X5
@AGATools
7 жыл бұрын
Hi! Unfortunately our repair kit only works for the E92 exhaust system, let me give you the contact information with our specialist and we can try and work towards a solution. Richard: Email - rich@agatools.com Phone - (760) 738 4084
@jessec4240
7 жыл бұрын
AGA Tools CAN it Work with my 328i xdrive 2013
@bountykilah2000
6 жыл бұрын
Can this fix work for Alpina B7?
@AGATools
6 жыл бұрын
No it will not.
@Mersim44
6 жыл бұрын
e93 but anyway ^^
@julianguz3624
6 жыл бұрын
What's the link to buy this?
@AGATools
6 жыл бұрын
www.agatools.com/part/exhaust-rattle-repair-kit-e92 Give me a call at 760-738-4084 if you have any questions.
@julianguz3624
6 жыл бұрын
Great thanks!
@Dushawn21
4 жыл бұрын
Is there one for the E-90? I think I have an e90 335i 2011 bmw sedan
Пікірлер: 93