Oh dear I just bought someone else's Terminator ( Another T800 ) Rebuild time, Your videos are so helpful 🎉
@tessjess1
2 жыл бұрын
Thanks for the journey of your tutorial of building the terminator ..I actually waited till I had the whole thing before I started..so my stand was done first...but building the Terminator was great joy having you explain in detail the steps...from a collector brother from down under I give you a big thumbs up👍
@WorldofWayneUK
3 жыл бұрын
DON'T GLUE THE SKULL IN PLACE. LEAVE IT BE......If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. If you have any questions or comments please leave them below and you can always come find me on social media via the links in the description. You can also see my behind the scenes video logs on my Patreon at www.patreon.com/worldofwayne
@johndixon5156
3 жыл бұрын
Just completed Pack 11. I'm a little annoyed that there's a delay in the shipping for Pack 12. But the T-800 looks amazing. Its gonna be bitter sweet when it's all finished cause I've really enjoyed the journey and watching your videos has been a joy
@stevenwheaton874
3 жыл бұрын
Can't wait to see this completed, it looks fantastic!
@synthlord2368
3 жыл бұрын
Congrats on finishing the main build!
@joseluishernandezaburto2701
3 жыл бұрын
I can’t wait to have pack 11 is coming!!!
@СергейПетров-н1ф
3 жыл бұрын
Интересно и всё по доброму! Благодарю добрый Американец! ;-)
@WorldofWayneUK
3 жыл бұрын
lol. I'm from the United Kingdom :D
@bobbybates2614
3 жыл бұрын
That's really awesome wayne I was watching more vids of thd victory today there are 136 supports to support victory that replaces the 20 cradles that they removed
@AdamKummrow5436
3 жыл бұрын
Carnt wait for this build to be completed i've never used so much glue on a partworks build, but it's looking fantastic 😃 i think there will be a switch under the skull to turn the spot lights on ect! 🤔
@aztekdummy
3 жыл бұрын
I'm surprised they didn't have you add glue to the joint between the base halves. that plate seems a bit wimpy to do the job alone.
@WorldofWayneUK
3 жыл бұрын
Yep. I am sure it will have reinforcements. I did make one mistake. I wasn't meant to glue the skull in place. Luckily I managed to part it before it cured fully.
@aztekdummy
3 жыл бұрын
@@WorldofWayneUK well, the skull was meant to be crushed. any cracks or broken bits could be easily explained away
@robertgripton4499
3 жыл бұрын
Undead dude will be finished before terme if you get the pack in time wow. I did not see that coming.😰😰 Loving the build as all ways. Stay safe all.
@JDMyers-lj8nz
2 жыл бұрын
Just received the pack 11 and finished majority of the build. I'm not going to do the base and stand. I'm going with a chair and holding a can of coca-cola.. Unfortunately, the right-eye LED didn't work, so Agora is sending me a new one. I've also ordered from ModelModz the power kit and Alexa assistant voice control kit. Also, a bit bad for them the exchange rate was better for me, sorry about the exchange rate, guys 😏
@mikes5637
3 жыл бұрын
Hachette were doing so well but I'm still waiting for 103-106. My T-800 is dormant in his plastic coffin on top of the wardrobe. Hopefully this is a sign that production will be continuing again soon.
@milanondrak5564
3 жыл бұрын
This comment has nothing to do with the shiny undead dude but I saw some rub on transfers in the correct font and scale, in white for the Victory in The Range this weekend.
@WorldofWayneUK
3 жыл бұрын
Really lol. Thats coincidental.
@AWF1000
3 жыл бұрын
Thank god I wasn't dumb enough to lose or throw out the battery pack.. it's been so long since I tested it that I forgot about it.
@davidz2016
3 жыл бұрын
I am looking forward to seeing this big guy all together. Do they sell this as a full set ? Or not yet . Last time I checked was still a issue to issue. Looks great.
@WorldofWayneUK
3 жыл бұрын
We have one more pack to go and then I guess anything is possible.
@davidz2016
3 жыл бұрын
@@WorldofWayneUK looking good . I enjoy the shows . Thank you .
@ThisIsGordonMiller
3 жыл бұрын
It will be available as a full set in July 2021 according to Agora. If you buy the full set you will receive the rifle included. Month to month the rifle is extra cost.
@Shadow-cp9pj
3 жыл бұрын
Cant wait for it to finish
@tessjess1
2 жыл бұрын
Is it possible to get the power mod for the Terminator anymore??
@richardmattingly7000
3 жыл бұрын
There are Modelers that enjoy completing a Kit/Build look what's on the Box/Instruction Photos and others who like a bit more personalization. It would of been tempting to have drill out the pipe ends instead of leaving the solid and perhaps of painted the human skull to be more realistic since the kits base would look like the nighttime scene in the film. It would be a hoot to have a lifesize Terminator Skull that would articulated and be able to act be a speaker where its jaws can move to either a talk like Arnold or even be like Alexa you could link into the Web. But it might give the prop ideas since it's how the Skynet became conscious so maybe not...
@2650josh
3 жыл бұрын
I found those neck piston screws the most difficult part of the whole build haha! I wonder if you really found it this easy - or if a little 'Hollywood magic' was used for the filming lol
@WorldofWayneUK
3 жыл бұрын
They were quite easy. I did it on live stream too. You can push them in to the skull further then they need to be so accessing them is a lot easier.
@RVPMatt123
3 жыл бұрын
I think I have a faulty circuit board as when I turn it on, the lights flash for a millisecond and nothing else happens. Not even when I press the test button. So my plan is to phone up Hachette to get a new issue sent my way
@leroythom1417
3 жыл бұрын
I get a whirring noise when i press the test button but eyes not lighting up or moving and the Jaw doesn't open. I have put the motor parts in correct but nothing.
@WorldofWayneUK
3 жыл бұрын
I think once we get the remote we will be able to fault find
@leroythom1417
3 жыл бұрын
Thanks Wayne for your reply mate. The eyes worked at the very beginning but nothing now quite strange.
@valdosaldierna9504
Жыл бұрын
Hi! Im from Mexico and I'm looking for the plasma gun . Where can I get it and how much is the price?
@WorldofWayneUK
Жыл бұрын
Agora do it but it’s only available in certain territories
@gugghead
3 жыл бұрын
How long does it take for all the stages to come
@WorldofWayneUK
3 жыл бұрын
I think you can use this in 1 go now fro. Agoramodels.com
@Jim-ke3vj
3 жыл бұрын
Lights on the eyes don't work for me, so gutted, I tested them way back at the start and they were fine. Maybe something came loose as I was attaching more and more parts to the head area.
@WorldofWayneUK
3 жыл бұрын
The head isn't to hard to take apart. You could have a tinker.
@Jim-ke3vj
3 жыл бұрын
@@WorldofWayneUK I'm hoping it's as simple as the aaa batteries in the box being flat 😅 Otherwise I'll give it a go 👍😎
@seanfleming1599
3 жыл бұрын
When was the Hatchett one finished?
@WorldofWayneUK
3 жыл бұрын
It's not. They are both now neck and neck
@seanfleming1599
3 жыл бұрын
@@WorldofWayneUK It's I can see the other one in the back with both arms and legs. Last a saw it only had one side.
@tonykeats9720
3 жыл бұрын
What is the difference between the hatchette T800 and the Agora T800??
@WorldofWayneUK
3 жыл бұрын
None
@tonykeats9720
3 жыл бұрын
@@WorldofWayneUK ok thank you Mr Wayne.. im thinking of compensating a right hand formation of fingers as issue 8 is not available and to many profiteers on selling platfoms I think you may need a extension on your man cave for your builds they are great to see built up and on show .. all best wishes to your family 👪
@SuperNerd12
3 жыл бұрын
My pack 11 is coming is it to boxes or one box I was told 2
@WorldofWayneUK
3 жыл бұрын
Its 2 boxes
@SuperNerd12
3 жыл бұрын
@@WorldofWayneUK right thank you Wayne can't wait until it's finish
@eddywells5689
3 жыл бұрын
Great vid 💞💞🙏🙏
@holtenauer63
3 жыл бұрын
crazy 😎👍
@alancoleshill4300
2 жыл бұрын
Hi wayne have u heard from Agora Models as I have emailed them about missing parts from a model and I have not had a reply for about 4 days now
@WorldofWayneUK
2 жыл бұрын
I haven’t but with postal strikes they may be a bit delayed atm
@alancoleshill4300
2 жыл бұрын
They haven't replied to me ask which parts are missing and I have ordered full kit of super snake and last Thursday and have not heard anything. Just hoping they not gone bust
@WorldofWayneUK
2 жыл бұрын
@@alancoleshill4300 noooo.
@remixsongs9352
2 жыл бұрын
Where did you get the iron man arc reactor from?
@WorldofWayneUK
2 жыл бұрын
Wish.com
@edwardjacobs4042
3 жыл бұрын
Wayne is that a miniature model of the Thunder Road?
@WorldofWayneUK
3 жыл бұрын
Yep
@edwardjacobs4042
3 жыл бұрын
Awesome I love Explorers what a great movie despite being rushed still one of my favorite movies
@bedfordshiremodeller4491
3 жыл бұрын
Yep i went1tube of glue just on the plastic display base pieces alone😬
@FISHLIPS62
3 жыл бұрын
Should you glue the skull in at this stage?
@WorldofWayneUK
3 жыл бұрын
NOOOOOOO. I made a mistake
@FISHLIPS62
3 жыл бұрын
O dear, can you reverse it?
@WorldofWayneUK
3 жыл бұрын
@@FISHLIPS62 yep. Already done
@FISHLIPS62
3 жыл бұрын
@@WorldofWayneUK was worried when you replied last.
@Deathwish026
3 жыл бұрын
you put the spring in the wrong way my man. had to check the magazine as your way is completely against how the spring rests in the hole.
@WorldofWayneUK
3 жыл бұрын
lol. You can put them where you want. I did change it after but since completing the model I have completely moved it. I didn't like it there anyways
@Deathwish026
3 жыл бұрын
@@WorldofWayneUK fair enough.
@mundolaguna
Жыл бұрын
you sell the stl files?
@WorldofWayneUK
Жыл бұрын
This isn’t a 3D print
@mundolaguna
Жыл бұрын
@@WorldofWayneUK OMG great job
@williamtrask1582
2 жыл бұрын
its called allen bolt and allen wrench
@Gordon4499
3 жыл бұрын
Just got to this stage now and the magnets wont fit in the scull ☹️
@WorldofWayneUK
3 жыл бұрын
That's weird
@Gordon4499
3 жыл бұрын
@@WorldofWayneUK Its not even close mate ☹️. will need to try and drill the holes out a bit
@shanepye7078
2 жыл бұрын
Too bad they are out of stock. I’d love to have all the parts, scan them all, then 3D print a 1:1 scale version.
@angelowentzler9961
3 жыл бұрын
Thirteen... hundred... bucks... That is WAY above my budget O_O
@bedfordshiremodeller4491
3 жыл бұрын
But where else are you gnna get ahalfscale T-800 for less than$1300🤷♂️
@revodave
3 жыл бұрын
you put the spring in the wrong way
@WorldofWayneUK
3 жыл бұрын
Yep lol
@revodave
3 жыл бұрын
@@WorldofWayneUK still looks good nice job
@Martin-ce2ko
3 жыл бұрын
Fairly sure we are told not to glue skull💀
@WorldofWayneUK
3 жыл бұрын
Lol. Yep. I have removed that bit of the vid and put a warning up. Mine came away fine so that's good
@СергейПетров-н1ф
3 жыл бұрын
А он умеет говорить : "Al bi back!" ?
@steve1315
3 жыл бұрын
Did think base was one unit
@WorldofWayneUK
3 жыл бұрын
Me too
@bedfordshiremodeller4491
3 жыл бұрын
Yes i thought that also. It splits into4plastic pieces with felt wood+ametal plate to support it,s weight. But their,s aserious panel gap line inbetween the4joints and the display itself will need som weathering as it,s abit too grey/bland for me liking
@shadowwalkeruk
3 жыл бұрын
Wayne Shouldn't of glued the skull *facepalm. Also the spring is in the wrong way.
@WorldofWayneUK
3 жыл бұрын
Yep. I have edited that out of the video but put a big warning up. Doesn't really matter about the spring. As long as it holds.
@teddybearmartin1
3 жыл бұрын
its not Thursday is it and you are on the rum
@WorldofWayneUK
3 жыл бұрын
I was at the weekend. Does that count lol?
@SuperNerd12
3 жыл бұрын
😂 everyone is pointing out the back of the skull haha
Пікірлер: 100