oh very nice mate . bit of a shame about the case from that angle looks like it will be a struggle to get a good size scope on there and be able to get it in the case . i have seen one and held it felt very well balanced and very well made 👍
@brandonwood4914
Жыл бұрын
Hi Zuby, Nice to meet you today @ Atherton. Hope your pellet testing went well today at Atherton. Nice gun but to expensive to shoot holes in paper😂. If you ever do some springer reviews you can loan my Cometa, save you buying them. Will watch your part 2 on this Air Arms with anticipation. Hope to see you again soon.
@zubysan
Жыл бұрын
Thanks so much Brandon. It was great to meet you too mate. Thanks for the JSB Express pellets for the XTI testing and for the go on your Cometa. Nice springer that for the price and you’ve set it up well. I may do springers soon, let’s see; they definitely make you work for getting your shot count compared to PCP’s! Now I’ve done my first set of tests with pellets for the XTI, I’ll be doing my follow up video very soon. Thanks again and I’ll hopefully see you soon at the range; next time I may join you for a Saturday chippie; it looked so good!
@TheWelshman50
Жыл бұрын
Looks superb 😮
@Hypercolumn
Жыл бұрын
The grey is my pesonal favourite, it has almost a liquid look to it.
@zubysan
Жыл бұрын
I agree. The lines that go through it give it that fluidic look and feel
@mrmyford
Жыл бұрын
just as a matter of interest your serial number was made 1 after mine, was 626..... but mine is the red stock, ...enjoy your rifle mine has been totally awesome
@tomthompson7400
Жыл бұрын
its super pretty ,,, shame it wont fit in the box with a scope on , so what do they cost ?
@zubysan
Жыл бұрын
Well… In my next video I’m gonna show how you can potentially get the XTI to fit into the same hard case it comes in with a scope, even though I’ve used a spare albeit larger case to house mine. In terms of form factor it is a looker for sure, especially the limited edition ones in my opinion
@garyhaden2390
7 ай бұрын
Hi mate I've had my xti50 for about a month now and love it. How you getting on with your xti50 and do you still like and use it .
@Sae-fu5ch
Жыл бұрын
Some advice trigger Screw no’ 2 needs turning inn clockwise maybe 1/2 or 1 turn to raise the sear up to fully clear the silver trigger bar by the looks of it ? Mine was same from factory 👍
@zubysan
Жыл бұрын
Thanks. What was the effect of raising the sear? I’ve found the trigger to be ok on the whole straight out of the box; the first stage travel is a tiny bit too much for me but I can live with it
@Sae-fu5ch
Жыл бұрын
If your trigger bar swivels side to side freely without touching the top sear with the two grub screws in fine leave it👍 Turning 2 will decrease contact and slightly raise top sear 👍 If you want less 1st stage just turn no’3 clockwise in tiny increments 👍
@glennbaxter2597
10 ай бұрын
@@Sae-fu5chhi do you own xti50?
@Relaxbadkneeadventures
Жыл бұрын
Nice enjoy👍😉
@markhomer5704
Жыл бұрын
Fantastic rifle , PERSONALLY I couldn't do it justice , as I don't ( well not at this time ) do HFT or FT .. and im not a particularly good shot .. as for the instruction leaflet , at the price AA are asking I'd want a holographic Gunsmith , similar to the doctor on star trek Voyager ..
@zubysan
Жыл бұрын
A holographic gunsmith would be good, or at the very least a direct line to AA when needed
@garyhaden2390
9 ай бұрын
How are you getting on with the xti50, I've ordered one 2 weeks ago and just waiting for delivery.
@zubysan
9 ай бұрын
I’m loving it; it’s one of my best high end rifles
@garyhaden2390
8 ай бұрын
Really pleased to hear that. Like you im just going to use it for target and plinking until i find the right pellets and get used to it, but eventually im looking into FT which I've never done before. So I'll have a go with my HW 100, and when I find my way around I'll use the XTI50, only in decent weather though lol.,, many thanks for your reply and i really can't wait to pick it from solware.
@zubysan
8 ай бұрын
@@garyhaden2390 please mention we’ve spoken when you see the guys at Solware; they’re great guys and will look after you
@garyhaden2390
8 ай бұрын
@zubysan yes mate i will, i know them quite well I've had all my guns and accessories from solware it's very local to me and they are a great bunch of people 👍🏻 and wouldn't sell you anything they don't think would be suitable for you.
@zubysan
8 ай бұрын
@@garyhaden2390 thanks Gary. Which XTi did you choose and which stock? Also please let me know how you get on with yours after you’ve had it for a bit.
@paulkavanagh5534
Жыл бұрын
Please don’t skip over the issue and mention problems with other guns , I’ve watched all your content but others won’t have.
@zubysan
Жыл бұрын
Hi Paul. Thanks for the comment. I mentioned the trouble I had with the other rifle because whilst in Solware, I said I didn’t want this to be another Panthera, with the people in the shop readily agreeing. At the end of making this video that conversation came to mind but I didn’t want to go into detail on the trouble I had with the Panthera(s), because I needed to wrap up. Hopefully this comment will prompt people to go back and watch those videos
@matty5547
Жыл бұрын
Have you done the 2nd video yet 🎯
@zubysan
Жыл бұрын
Not yet. Coming soon
@alanmullock381
Жыл бұрын
Not jealous at all!😡👍👍👍👍👍👍👍👍👍👍👍😎😎😎😎😎😎😎
@zubysan
Жыл бұрын
Thanks Alan. I haven’t been able to test it yet so keep your fingers crossed for me that it’s good to go
@POINTSOFAIMcheekyscouser
Жыл бұрын
It oozes quality..poor quality if an expensive, untested rifle leaks...and im guessing the fps over a chronograph is lower than 5fps over 20 shots...hmmm or is it ?
@zubysan
Жыл бұрын
I did say in the video that it oozes quality despite the fact that it did need a valve replacement. I don’t know if you’ve seen one in the flesh so to speak, or even been able to fire one, but it does look and feel like a quality piece of kit. It was just disappointing that this particular unit had a leaking valve, but that’s been sorted. However, these are initial impressions from just getting the rifle and I hope that the rife performs well. I will be reporting back upon its performance, along with any other points I feel need raising. Please stay tuned.
@POINTSOFAIMcheekyscouser
Жыл бұрын
@@zubysan i know some rifles look a million dollars..as so to speak...but quality is 1 of the main things that go with accuracy.I just dont like people not being 100% honest about something that everyone has had an eye on with anticipating on buying such a good branded item
@michealmckeown8681
Ай бұрын
Sorry a bit late to the party, 🎈 but I’ve used one with out a leak , I’m a big lad sorry it kin heavy, bro stick to the HFT 500 and wack on the gerbal and all the other gimmicks , you will out shoot it ? Our club as one for sale 600 shots going for £2500 , isn’t worth the money shoots like a hft , but you can afford to take your family for a good holiday , been a life time user air arms , very disappointed with this cave man club try again??? But with experienced engineers stop letting kids with the ato autocad and weed loose very disappointed ☹️
@richardgriffith2327
Жыл бұрын
It looks nice but way over priced
@zubysan
Жыл бұрын
It is very expensive which is a pain but I’m hoping it’s gonna be worth it accuracy wise
@Professor-Jack
Жыл бұрын
Hello Zeb i agree about the bench rest i tried selling my TSAR Daystate, i was told sorry your gun is for FT, i don't want FT gun, this is also i sad for bench rest because i bought a clamp that fits the under side of the rail to fit a bipod so your wright Zeb to say its for bench rest iv still not put the 2 guns up for sale is there any other way i can contact you and send you pics ????? thanks keep up the good work mate
@Professor-Jack
Жыл бұрын
and i can talk to you about the Wolverine once you contact me on there on gun star my TSAR
Пікірлер: 39