Sweet ride...hope I get to live out that dream one day
@joeyangeles5530
3 жыл бұрын
Damn good work,that crew cab gonna look sweet
@twistedc10
3 жыл бұрын
Thanks brother. Thanks for watching 🙏💯
@alexismoreno4706
3 жыл бұрын
Nice job 💯
@yomommajumprcables
3 жыл бұрын
Damn I wish you lived in Va. Awesome work
@twistedc10
3 жыл бұрын
Thanks bro . I appreciated 👍🏽👊🏽thanks for watching 💯
@makepeace2850
2 жыл бұрын
Great job bro👊.
@twistedc10
2 жыл бұрын
Thanks bud thanks for watching 🤙🏽🤙🏽
@16AZG
2 жыл бұрын
Need this for my 2014 gmc sierra ASAP. Money talks very interested
@joshua2677
Ай бұрын
🔥🔥 can you post the parts needed to do this i would really appreciate it
@twistedc10
Ай бұрын
www.avsontheweb.com/
@dangtz1985
Жыл бұрын
Hey homie, question do you need to drop it first with control arms, A arms etc then do bag setup for the front? I know the rear for sure C notch and 4 link but not sure about the front. Thanks!
@twistedc10
Жыл бұрын
They sell a bag kit up front . To do it the correct way. www.avsontheweb.com/
@inlovewiththegto4559
2 жыл бұрын
Beautiful ride bro! I've got a 2000 ext cab, but I gotta replace my rear bags. Think the ss6 bags would work??
@twistedc10
2 жыл бұрын
Thanks bud,thanks for watching 🤙🏽 and depends on your application. Either the slams 6. Or slam 7s just depends on your setup
@suavecitosgarage4258
2 жыл бұрын
Bigger bags usually give a softer ride. Im running the KP Components rear setup on mine and the Dominator 2600s ride real nice.
@arejay5563
3 жыл бұрын
Nice
@twistedc10
3 жыл бұрын
Thanks brother 🙏
@metalhead24922492
Жыл бұрын
Where did the bag mounts & rear link kit come from ?
@twistedc10
Жыл бұрын
www.airbagparts.com/
@christophergarza510
2 жыл бұрын
Do you still have the single driveshaft or did you switch to the dual driveshaft
@twistedc10
2 жыл бұрын
No customer change it to a 2 piece drive shaft. Thanks for watching 👍🏽
@jfjteldelasierra6222
Жыл бұрын
Mismo chasis? Se ve bien
@arejay5563
3 жыл бұрын
👍
@tombowman3058
2 жыл бұрын
Hey man, what size wheels and tires are you running? Not sure if you mentioned it and I missed it lol
@twistedc10
2 жыл бұрын
Thanks for watching bud and it’s was a customer truck I believe there were 24s
@tombowman3058
2 жыл бұрын
@@twistedc10 cool cool, thanks man. Getting ready to start the process on my 06 crew cab, just trying to get all the info I can before I start. I’m an OBS guy so everything with the 99-06 is new lol
@twistedc10
2 жыл бұрын
Nice brother this truck I callab with someone else did all the fabrication all I did was just install the airbags and wiring.
@dragon123443
11 ай бұрын
Hey bro do you remember how you ran the wiring into the cab from the manifold? I'm bagging mine too but I have an extended cab
@twistedc10
11 ай бұрын
Yeah!! You could purchase the kit at www.avsontheweb.com/…
@dragon123443
11 ай бұрын
@@twistedc10 lol yeah I have one already. Did you just drill a hole in the bottom or stick it through an existing grommet?
@twistedc10
11 ай бұрын
Drill a hole under the door trim and use a grommet…
@danielz7936
2 жыл бұрын
I have a 02 Silverado single cab if I wanna lay frame with 24 is a hyrdroboost conversion needed or am I fine without doing the conversion
@twistedc10
2 жыл бұрын
Would highly recommend the hyrdroboost u would also need to relocate fuse box and water resovor and air intake also fire wall must be tubed to lay frame . Thanks for watching 👊🏽
@andrerivas1317
2 жыл бұрын
Hey i love your channel man, i have been trying to bag my 03 silverado but people i talk to say that i need air struts. I see on this build you just used normal bags, how did you do that?
@twistedc10
2 жыл бұрын
Most definitely it could be done bro this truck I did not do no type of fabrication at all someone else did I just did the air management install but they have pre fab kits visit www.avsontheweb.com/
@ryancraker7456
2 ай бұрын
Where you relocate the stuff under the hood?
@twistedc10
2 ай бұрын
Someone else took care of that relocated the ecm fuse box and water resovor.
@jrmrbigj
8 ай бұрын
How much you charge to bag same kinda truck.
@twistedc10
8 ай бұрын
Currently not doing air suspension sorry bud
@Lowpsi
2 жыл бұрын
Wheels aren't gonna hit the air line while turning?
@twistedc10
2 жыл бұрын
Negative I check for clearance wile stalling them 👍🏽. Thanks for watching 👊🏽
@Lowpsi
2 жыл бұрын
@@twistedc10 good deal,was just curious
@betoriosjr5777
2 жыл бұрын
How much would it cost to bag the whole truck bro
@twistedc10
2 жыл бұрын
Thanks for watching bud this truck we didn’t do any type of fabrication work i just install the air suspension compressors wiring ect .. but I know that prices have escalated would have to call it in . Depends also on the set up you looking for and what wheels u trying to lay
@marthajauriqui5434
3 жыл бұрын
👍 nice
@franciscoalvarado5142
2 жыл бұрын
What kit are you using bro
@twistedc10
2 жыл бұрын
Avs kit.. thanks for watching
@randyhernandez375
2 жыл бұрын
i’ve been wanting to bag my chevy 03 single cab.. and i can’t find good jobs in my town so kinda sucks :(
@twistedc10
2 жыл бұрын
Thanks for watching bud🤙🏽 what town you from ?
@randyhernandez375
2 жыл бұрын
@@twistedc10 i’m farrrr i’m all the way in tennessee 😔
@randyhernandez375
2 жыл бұрын
@@twistedc10 good video tho 🔥
@twistedc10
2 жыл бұрын
@@randyhernandez375 thanks for watching and supporting my KZitem channel 💯 big s/o to people in Tennessee 💯
@chatobalencian1504
11 ай бұрын
What bags are you running in the front also what kit are you running all around whats all done to the front any drop spindles or just regular ones any mods done up front or is everything in stock locations?
@twistedc10
11 ай бұрын
Thanks for watching and yeah drop spindle’s battery relocated fuse boxes relocated air intake also modified hot up avs for your air suspension needs 99-06…
@twistedc10
11 ай бұрын
www.avsontheweb.com/
@JoseGarcia-pq1uh
Жыл бұрын
What system did you have on it because I’m lookin at some but don’t want it to sound like the compressor I want it to sound like yours when airing out
@twistedc10
Жыл бұрын
Depends if you running valves u could use mufflers to silence the air being dump or . U could run a valve block there alot quieter… go on avs.com www.avsontheweb.com/
@raulcarrera1840
2 жыл бұрын
Bro que modelo de airbag usaste en la parte delantera??
@twistedc10
2 жыл бұрын
SS7. Gracias por ver 🤙🏽. slamspecialties.com/W/product/ss-7/
@raulcarrera1840
2 жыл бұрын
@@twistedc10 gracias y muy buen trabajo bro saludos de chihuahua mex. 👍🏻👍🏻
Пікірлер: 78