👉👉👉😳 It came back worse than when I sent it to them for service. No Joke. Horrible Warranty and repair service. kzitem.info/news/bejne/pK6gp2WCkJuDnZw
@trevormcdaniel9598
3 жыл бұрын
So where will you be buying a new popper? I have air wasting/slow leak issues (around 200psi every 24 hours) and I haven’t even shot 200 pellets through it yet. Debating on sending it back or just trying to repair myself.
@slowpokeairgunner4027
3 жыл бұрын
@@trevormcdaniel9598 There's a guy that goes by dark Charisma in the Gateway To Airgun, and Airgun Nation forums that makes them. Cool dude, nice, knows what he's doing, he'll make a Delrin poppit for you, also work on the valve and even bore out the ports for more power if you want. I'd get in touch with him if you're gonna replace the poppit. I still haven't taken the time to fix mine yet, still a bit pissed over the company sending it back to me worse, I'm still so mad at the company for pulling this crap I don't even want to shoot or mess with the gun, lol. That will pass, but how I've felt about it at this point. I could have saved myself some money and fixed it myself, I wanted to see if their warranty was worth anything for repairs, apparently not.
@trevormcdaniel9598
3 жыл бұрын
@@slowpokeairgunner4027 thanks that’s helpful. AirTac Hunting has a video of him shooting the 23gr Patriot slugs at 170bar around 850FPS and making some awesome shots. I tried myself but could not get anything consistent at 50 yards. Big changes in velocity and the regulator took forever to creep up to the set 170 bar I had it at after each shot which seemed weird but I’m also new to PCPs so it may just be a cheap product thing. I would also only get around 15 shots with the slugs before I would fall off of the reg which is less that the guy on his channel was getting! Guess I’ll stick to shooting low power Hades for now until I figure out this air issue because it seems to shoot them more accurately and consistent anyways.
@ajcutler3472
2 жыл бұрын
Lol I just found this video,. My avenger started leaking after 100 shots. I sent it back for warranty work. Got it back 7 weeks later,. Guess what?????? Still leaking lol. So sad that they can't get things right
@slowpokeairgunner4027
2 жыл бұрын
@@ajcutler3472 Yeah man, this was their third gun in a row they put out that leaked. I still haven't shot mine since, I did fill it up the other day and it leaked out overnight. I'll fix it someday, but right now I'm still pissed and disgusted at the whole situation, lol.
@kurtfirestone2761
3 жыл бұрын
My avenger had a leak when I got mine in .22 . A little soapy water and The air cylinder o ring was leaking. Straighten the o ring and screwed air tube back on and fixed the problem.
@slowpokeairgunner4027
3 жыл бұрын
I can see that happening, it may be what's wrong with mine, I suspect it's an issue with the poppet, Air Venturi suspects the same. I'll know more later, but I don't wanna mess with it, it's under warranty so they can fix it. I'd say mine has been leaking from the time I got it, mine had some air in it, about where it stops now, it doesn't leak all the way down, so it gets to a point where whatever seal that is leaking can hold the pressure. From what I understand they do fill them with air to store, if you get it and it's leaked down to around 100 bar and stays, it's been a poppet issue, so kind of an informed guesstimation on my end, but nothing for certain. I do appreciate the info though, something i can keep my eye on in the future.
@slowpokeairgunner4027
3 жыл бұрын
@Sameer Dass Have you checked anything on it to see where it's leaking? I'm letting them fix mine, it's under warranty. If you're going to fix it yourself, I suggest the GTA (Gateway To Airguns) forum and AGN (Airgun Nation) forums for help on repairs already done by others. I can tell you in the theory of possible issues, but I haven't taken mine apart so it would be better to talk to people who have already done it. Thanks for asking and watching the video.
@kurtfirestone2761
3 жыл бұрын
Thank you for the info, very informative. Keep up the great videos
@slowpokeairgunner4027
3 жыл бұрын
Thanks for checking it out Kurt, I appreciate it.
@FirstStateAirgun
3 жыл бұрын
Great episode brother packed with all kinds of great information
@slowpokeairgunner4027
3 жыл бұрын
Thanks for checking it out Lou. One of these days I may actually stick with an outline or script so I'll stop repeating myself on stuff, lol, I just turn cameras on and start yappin'. I get that from my grandfather on Mom's side, and Mom, I sound like a broken record repeating myself sometimes, lol.
@FirstStateAirgun
3 жыл бұрын
@@timmy4539 qui pasa Amigo 🍕🍕🍕 TIMMY TIMMY TIMMY 🤣🤣🤣🤣
@mikesbackyardeh
3 жыл бұрын
Great video slow poke ...to bad about the leak. Good that it’s under warranty.👍👍😎
@slowpokeairgunner4027
3 жыл бұрын
Thanks Mike. The leak sucks but it's common, or it was when they came out, not sure about now, but yeah, I'm taking advantage of the warranty.
@wesmiddaugh230
2 жыл бұрын
I agree the Air Arms shots better at all ranges then the JSB. Its close though.in my Avenger. no leaks or problems
@slowpokeairgunner4027
2 жыл бұрын
The Air Arms is my favorite pellet, that's only because they shoot more accurately than anything I've tried in my guns. I take that back, I had one that hated them for about a year, now it drills a hole with them.
@bushwhookie1334
3 жыл бұрын
I have a hatsan flash .25 with regulator 47 fpe. Hatsan are tanks leave mine in car for over a year now no leaks or rust still going strong
@slowpokeairgunner4027
3 жыл бұрын
Yeah man, they make some solid guns, simple but powerful and accurate. I've taken my wood model on quite a few trips, just tossed it in the box it came in and it has yet to have an issue. It's been damp and wet from over nighters, dropped, etc and no issues, still shooting at the same POI from when it was last set. I love mine, solid guns for sure.
@teddyjam1880
2 жыл бұрын
Nice 👌
@slowpokeairgunner4027
2 жыл бұрын
Thanks, I appreciate ya dropping a comment.
@cattlemanguns7622
3 жыл бұрын
Awesome 👏🏽
@slowpokeairgunner4027
3 жыл бұрын
Thanks for checking it out.
@heathhalfhill6867
3 жыл бұрын
Soapy water makes a bubble even on a slow leak. Captain O-Ring make a complete kit for under 15$ on Amazon.
@slowpokeairgunner4027
3 жыл бұрын
Yep, once again good info. I have always went straight to the website for Captain O-Ring's stuff, didn't know he was selling on Amazon now. I have o-ring kits but the OD and ID isn't always gonna be correct, and I don't have seals shapped different other than round, or delrin seals etc, etc. I've been frustrated with the whole situation and honestly felt really crappy for the last month so I haven't even messed with it, I can only work on it when my body says I can, lol, and with other responsibilites that have to be taken care of I'm usually drained of energy or in to much pain to mess with it after, lol. I haven't even done the soapy water test on it yet, it's gonna hurt me to take it apart and check it and I'm not up for the frustration, hand and arm pain to do it yet. Thanks for the comment and good info for others to check out, I feel like I regurgitate the same info over and over to people, if they see your comment it makes it less for me to have to tell others, lol. I appreciate ya chiming in.
@anthonyferguson1644
3 жыл бұрын
Scott , How long have you owned you Avenger? I've got an Avenger in .22 and have it since November 2020 and thus far no issues- Thank God! Lately I have topped off the Avenger with an ATN X sight 4K pro 3-14 and still getting use to it. Like you I use it for pest control and hunting. Last year I took care of a couple of groundhogs with my Hatsan Flash in .177 Keep up the good work and may all your shots be straight and fly true.
@slowpokeairgunner4027
3 жыл бұрын
I got my Avenger for Christmas last year. I think it had a leak when I got it, they were having issues with it when they came out and from what I can tell, it's gotten a bit quiet and not as many issues are popping up. I definitely need a nice scope on mine, the package deal with this one was with a Mantis scope that I'm not really impressed with to be honest, the gun deserves something better the way it shoots. The Flashpups are good guns, simple, easy to work on, just a solid platform that's powerful and their barrels are accurate. I know a .177 will take about anything you want with an accurate shot, I have .25 cal pcp's and my .177 is a springer, if I happen to make a bad shot I know it will be with enough power to put the brakes on him long enough to get a follow up shot. Not that I am a horrible shot, but some times stuff doesn't go the way you were seeing it in your head, lol.
@stevengoodman3498
Жыл бұрын
Got 2 very large groundhogs that were digging under my deck and burrowing under my new storage shed with my 25 AV bullpup. I've only shot 500 rounds thru it so far and I've had it for a year now and no leaks yet. Hopefully you guys will get yours sorted out.
@airgunspestingch.8426
3 жыл бұрын
👋🏾Sup bruh good video my brotha 👊🏾😎
@slowpokeairgunner4027
3 жыл бұрын
Thanks for stopping by bro, you're always giving support, I appreciate ya man.
@michaelb.42112
3 жыл бұрын
I also love my AT-44. Probably the most accurate, non-pellet picky air rifle I own. It shoots EVERYTHING accurately.
@slowpokeairgunner4027
3 жыл бұрын
Yeah, great guns for sure, it's just a weight issue with me. It sits in the corner in it's case, it needs to be shot, been a good while now.
@michaelb.42112
3 жыл бұрын
@@slowpokeairgunner4027 Yeah, I heard you say that and I agree 100%, but it sure is good !!!
@slowpokeairgunner4027
3 жыл бұрын
@@michaelb.42112 When the Flashpup came out I preordered mine, after about a month or two Michelle snuck around and bought the AT44 in case I had to wait several months, lol,. She says it's boringly accurate, it just drills holes, lol.
@airgunsofidaho4886
3 жыл бұрын
Awesome Video bro. I have the same problem. The benjamin kratos. 22 started leaking from the poppet. Im having a hard time finding a poppet rn. The only ones I found are 50 to 70 bucks.
@slowpokeairgunner4027
3 жыл бұрын
Wow! That's crazy. I need to investigate a little further, but when I looked up some stuff on it I found some they say will fit for about ten bucks, I can't be sure and need to dig in a little deeper, but I know they are out there, hopefully not that much.
@gmanneod8085
3 жыл бұрын
Great video and awesome information! To bad about the Avenger! Some guys on the forums are suggesting running the regulators on the 25 cal. at 2400 PSI to get 95% of the power and make the internals last longer! Like you said, Steve at Air Velocity Sport had showed the poppets are made out of peek which is cheap!
@slowpokeairgunner4027
3 жыл бұрын
Thanks for checking it out. Yeah, I agree that it needs to be turned down to save the poppet, I want it to run like it can so I will eventually have to fix it, I love the gun, but people should know if they don't already. Another video on it helps get the word out, and hopefully AV will do something about it.
@houmjamir3053
3 жыл бұрын
Thanks for the three sticks...
@slowpokeairgunner4027
3 жыл бұрын
You're welcome, works for me.
@kurtfirestone2761
3 жыл бұрын
I added the Donnie FL adapter and sumo and it's super quiet
@slowpokeairgunner4027
3 жыл бұрын
I'd like to get either one, they're a little more than I am want to spend at the moment, they are worth it if you want to quiet any gun down though, nothing on the market compares to the Donny Fl's from what I understand.
@terminadorairgunsandoutdoors
2 жыл бұрын
You may want to getchyoseylf a Terminador A-Tac stock for your Avenger 🤔
@slowpokeairgunner4027
2 жыл бұрын
I don't shoot the Avenger anymore. After the issue with the warranty and all the BS with it, I'm not really interested in the gun at all. I may have ran a mag or two through it since it came back, some day I'll fix it, but I'm still not ready to mess with it yet, I have two other budget guns that are just as accurate out to 136 yards for me and I've had no issue with for years, knock on wood, but yeah, when I want to shoot I grab something reliable, if I have to shoot I grab something reliable. I appreciate your comment, have a good one.
@mikeshepard3602
3 жыл бұрын
Great video. I’m glad I was able to find your channel. Crappy that the gun came back worse, hopefully it’s fixed now. Question, what do you use to refill the air in it? Everyone shows everything about the guns but not how they fill them and what they use? Keep the videos coming. 👍
@slowpokeairgunner4027
2 жыл бұрын
Thanks for the comment Mike, sorry it's been so long in responding, I've kinda been in burnout phase after messing with this gun, company and airgun community as a whole. I use the Air Venturi Nomad 2, used to use a hand pump but this gun has abigger tank and I'm not sure if I could ever get it up to pressure with a hand pump.
@mikeshepard3602
2 жыл бұрын
Thank you for the response.
@airgunlr5807
2 жыл бұрын
👌😁
@johnhawk9321
3 жыл бұрын
Very informative video
@slowpokeairgunner4027
3 жыл бұрын
Thanks, I appreciate you checking it out.
@houmjamir3053
3 жыл бұрын
The Aventuri Avenger airgun that I had is leaking too. Please do update with update video.
@slowpokeairgunner4027
3 жыл бұрын
I just uploaded a video two days ago. I'll just say it's not fixed so I have to fix it myself now.
@bendollpetualang2430
3 жыл бұрын
Like vidio friend👍👍
@slowpokeairgunner4027
3 жыл бұрын
Thanks, I appreciate you checking it out.
@heathhalfhill6867
3 жыл бұрын
DUI makes one and you will find out all you need to know on GTA. He make many rocking upgrades for these guns. I have never had any issues yet with any of mine yet but still bought his upgrades in case.
@slowpokeairgunner4027
3 жыл бұрын
Thanks for the comment Heath, I know we haven't talked but I've seen you around the forums and on here for a while always giving good info and help. Yeah, I am going to get DUI's aka Dark Charisma's upgrades. I hear he will work on the valve and of course open the ports as well, I will be upgrading it and he's the man I'll work with.
@luckysevenairammo1217
3 жыл бұрын
Thanks for the subscription brother ! I don't quite yet have any content but it's on it's way. I will have some vids cranking out some fine lead projectiles soon. I have been too busy with the lead to make any vids. I take pride in creating top notch cast slugs, I have some great stuff coming out soon sized in .356 and.357... got a bunch of projects going and a coming soon. Also hopefully some custom cast .25's at some point. You have awesome content man ! Thanks Subscribed
@slowpokeairgunner4027
3 жыл бұрын
I figured as much when I saw your comment, I thought I'd get a jump on subbing so I can check out what you've created from the start. I appreciate the sub, I'm working on making it better. I haven't tuned for slugs, tested some on different power settings, but the choked barrels on my Flashpups makes them act weird with slugs. Some like to move abnormally slow instead of in the 950 fps range, the base makes a difference, like cup based, dished based, flat based, pellet or deep dish based and all that good stuff. My Avenger is said to shoot slugs well, it has to run hot around 950, but if the poppet on this valve isn't built for that kind of pressure it messes that up. I've got to get a poppet made for it, people are having to run them low to keep them from breaking. I need one that will get up and go. Thanks for the sub and comment.
@luckysevenairammo1217
3 жыл бұрын
@@slowpokeairgunner4027 cool man ! I have been keeping a eye on your vids, I like your style 👍 I haven't made any hollow or dish based ones yet but I can go in any direction at any time. For now I mostly have flat clean sharp bases. I take extra care in not mishandling them to avoid any dings and such. Nothing sucks worse then getting a bag of busted up slugs. I vaccuum pack them so they stay in pristine shape. I do have a hybrid pellet/slug design in the works that has a semi shallow skirt but it is a monster .510cal. 405gn I just picked up a AEA challenger in .357 and plan on testing some of my .357 stuff in it soon. The thing is a beast for sure and has a straight slug barrel on it so I am hoping to get some decent results. Nothing is more accurate then a good diablo just under 940 but something about the raw energy of slugs draws me in. It's gonna be fun !
@dangeraghty6715
3 жыл бұрын
Had the same problem with mine, they replaced it with out a problem... But it did take 5 months to get it all straightened out. Great Camo job on your gun btw :)
@slowpokeairgunner4027
3 жыл бұрын
I'm sending mine to AV, hopefully, it won't take long. If it does I guess I'll deal with it and make a video on that as well, lol. I appreciate it, it works, I lost patience and didn't wait to get a real sea sponge, but I'm happy with it. Thanks for checking it out and the comment.
@dangeraghty6715
3 жыл бұрын
@@slowpokeairgunner4027 Yeah, I tried Hydro Dipping my gun with the Carbon Fiber look. I'm pretty handy with stuff, but that just beat me up on every try. Going to price it out from a pro :)
@slowpokeairgunner4027
3 жыл бұрын
@@dangeraghty6715 Talk to Joe at Outdoors With Joe, he has his Hydro Dipped with the Carbon Fiber look, maybe he can hook you up. I didn't like the plastic look and feel of mine, it's easier to grip as well with the matte clear coat.
@dangeraghty6715
3 жыл бұрын
@@slowpokeairgunner4027 I saw his video, it looks good. However, after seeing yours... well I might just go with a Camo look. It will be the first in my collection, very appropriate for the Avenger :) Did you mention you had an AT44 PA, If you did, I have an issue with mine and I'd like to compare notes if you have one ?
@slowpokeairgunner4027
3 жыл бұрын
@@dangeraghty6715 One thing that you can do that I didn't to this rifle, I simply forgot, meant to but it turned out fine anyway, lol. But put stripes across it with the black and brown, or earth brown, make a few stripes and exes on each side before sponge painting it. That's how I originally did the Flashpup, my first shot at camo and painting a gun. There's a lot of stuff you can do, I've seen some nice ones. kzitem.info/news/bejne/o2qmt2amoGWbgqQ
@victoradams6635
3 жыл бұрын
Great video. Chocked full of info. I’m curious, where did you get your guns stocks dressed out?
@slowpokeairgunner4027
3 жыл бұрын
I just painted them, some camo paint and matte clear coat from Walmart with a sponge from the bath section and you're in there. A real sea sponge comes out better, but that's what I had to work with. I have a video on the paint job and how to do it kzitem.info/news/bejne/xaKcsZuFh5ilZIo
@troyemmanuel3985
3 жыл бұрын
Hello Good day I watched many reviews on the avenger and based on what I saw I was convinced so I ordered a 22 Cal, now I saw your video a now I'm scared that when I receive it I get an issue
@slowpokeairgunner4027
3 жыл бұрын
I hope you got a nice gun, you should check the forums on it, Gateway To Airguns and Airgun Nation for more info on issues. You may get a good one, plenty of people have gotten good ones, but when I sent it back and they sent it back worse, that pretty much ends it for me and AV guns.
@garypostell5268
3 жыл бұрын
Send it back to Air Venturi to be fixed again! Keep us updated please!
@slowpokeairgunner4027
3 жыл бұрын
I did send it back, and did a video on it.
@ComplexCash
5 ай бұрын
My jet 1 leaking out the barrel wont fill
@bigfoot4455
3 жыл бұрын
Who does your hydro dip?
@slowpokeairgunner4027
3 жыл бұрын
That's not hydro dip, it's camo paint from Walmart. Here's the link to the video of how I did mine. kzitem.info/news/bejne/xaKcsZuFh5ilZIo
@bigfoot4455
3 жыл бұрын
@@slowpokeairgunner4027 OOOOO OK thanks, looked dipped.
@michaelbritain5546
3 жыл бұрын
Go on snowflakes watch it, I love to see you flailing around in heart attack mode... great video.
@slowpokeairgunner4027
3 жыл бұрын
Thanks for checking it out, I appreciate it.
@gumbystown
3 жыл бұрын
They're going to take it back with your custom stock
@slowpokeairgunner4027
3 жыл бұрын
They're gonna fix it, they have no problem with the stock since I'm not returning it, just getting it fixed.
@davidberkley839
2 жыл бұрын
Mine didn't leak for 2 yrs now every tube leaks top and bottom ! It's now in the trash ! Almost The side lever really sloppy ! It's junk
@slowpokeairgunner4027
2 жыл бұрын
You were lucky to get that long out of it. Trust me, this is absolutely nothing pro AV Avenger, but it is recommended to tear them down and replace all the seals after a year or so of use. That being said, the guns I bought four years ago are still running as well, if not better than they were when they were new, that includes being taken on a lot of trips, left in rainstorms, and shot to death, not one leak, I have yet to have to tear it apart to replace nothing other than an o'ring on the end of the barrel that gets shredded when you take the shroud off, so it has to be replaced. They are supposed to have kits at PA with all the rings for the Avenger, I think I will eventually have mine amped up a bit and good rings, along with a good poppit, turn it into something I will use. Right now it's collecting dust, I actually filled it a couple of weeks ago and thought about shooting it, but I didn't wanna waste pellets, throwing a scope on, etc for it be empty in the morning. I haven't even tried to shoot it since they sent it back worse than when I sent it to them.
@adrianwhite277
3 жыл бұрын
How loud is the flash pup and what kind of shot count are you getting
@slowpokeairgunner4027
3 жыл бұрын
It's not that loud, I have a lot of videos with them in it. The synthetic has an anti-ping hammer system in it and is more quiet. The shot taken on the sparrow in this video (near the end at 32:27 time marker). You can also hear them in other videos. I don't have a sound meter, I know Pyramyd Air has them listed as being "medium" on sound level, but I'd say more lowish side than mid range. You can get an idea here as well kzitem.info/news/bejne/uqho2pWVg3eGpII They get quieter the more you shoot them as well. I know the camera doesn't really pick it up correctly, but I don't think they're loud. If Michelle is in the garden or about 30 yards away she can't hear the gun, only when the pellet hits the target. Hope that helps.
@slowpokeairgunner4027
3 жыл бұрын
I forgot about the shot count. I get thirty shots on a fill from full down to the yellow. About halfway through the second mag the POI drops a bit you have to adjust the holdover. Then as well on the last mag, but it's still pushing plenty of power.
@johnhawk9321
3 жыл бұрын
Dave Rolando is sell air guns fx and such check him out
@slowpokeairgunner4027
3 жыл бұрын
There's a guy in the GTA and AGN fourm that goes by the name of DarkCharisma, DUY, that made Delrin ones for the Liberty, that's who I'll be getting in touch with. FX guns are out of my current range in what I'll spend on a pcp, I appreciate the info though.
@johnhawk9321
3 жыл бұрын
@@slowpokeairgunner4027 thats cool i was plugging for him is all but keep up the good videos
@daviddodson3807
3 жыл бұрын
This is the video after it was sent back. It's worse than when I sent it back to be fixed. Horrible service and warranty. kzitem.info/news/bejne/pK6gp2WCkJuDnZw
Пікірлер: 89