The Egzumer v0.17 firmware is the best one I've found for my UV-K5 so far. Thanks a bunch. It makes the UV-K5 an acceptable air band receiver and has a lot of useful features to use it on the ham bands.
@WarrenAkerman
9 ай бұрын
HUUUGE improvement. I played around a bit last night. After installing this firmware, i also set the AM freq's all to NARROW. The audio is now even more clearer than when it is set to wide , and it seems to be more sensitive, as im also receiving MORE now when set to narrow than i do when its set to wide. I see you can also set blaclight intensity BLMin/BLMax which is nice and will probably save a bit on the battery 73
@howardgipps7351
9 ай бұрын
Just tried the airband mod on my K8...massive improvement, hard to believe a firmware mod would do that, but it does. If only all the other mods worked as well, or at the same time. I suspect this radio actually needs more flash memory to store all the mods, and I will eagerly await a new iteration, and I will buy it, because the UV-K8 is amazing compared to all other cheapies. Oh and it could do with substantial water-proofing as I use mine on boats at sea often in rough weather , ( with Marine Rescue.) Great video too, so thanks.
@HamRadioDX
9 ай бұрын
👍
@spaceflight1019
9 ай бұрын
When the radio was first introduced I did some experiments with the air band. My impression was that of an insufficient AGC causing distortion to the audio once the receiver signal strength exceeded a certain level.
@w.w77
7 ай бұрын
I miss living 4 kilometers from brisbane airport. My scanenr and antenna setup picked up almost evey radio in the entire brisbane to gold coast to toowoomba to the sunshine coast. It was great. Now im in a rural area i get aircraft and cb and amature but a lot less than when i was in brisbane
@DarylMartel
5 ай бұрын
Thnx for sharing! I just did the firmware update to latest Vers 0.22, and it does make an improvement to airband listening. This radio is a steal of a deal.
@chrisreynolds6331
7 ай бұрын
I bought mine a week ago and it's great. People seem to be coming up with new firmware variants almost every day so it's great fun to play with.
@washburn8049
9 ай бұрын
Just done the mod, and have to say it's spot on. As these radios are so cheap I now just keep one in my car all the time.
@gingerpedersen6257
5 ай бұрын
That's my plan too!
@W5KJD
4 ай бұрын
Ham Radio Prep is wonderful, you will pass the test. It took one week from start to licensed 7 days is all it took.
@tonysquibb
8 ай бұрын
The "flash" upgrade worked for me . Thank you for your videos which I find most helpful
@HamRadioDX
8 ай бұрын
You're welcome!
@TonyLing
9 ай бұрын
The feature I'd like to see would be the doing away with the fake dual VFO operation and devoting more screen space to what really matters.
@mjw_geek
9 ай бұрын
Cool video, there are a few people out there adding interesting mods including real MDC-1200 to and rx.
@HamRadioDX
9 ай бұрын
Real MDC-1200 would be cool!
@jeremycortese
6 ай бұрын
Wow. That sounds wayyyy better with that firmware update!
@KE6DOA
9 ай бұрын
Makes it sound like FM nice upgrade
@FEPLabsRadio
9 ай бұрын
Good job - I need to dig my K5 out and upgrade it. Thanks!
@HamRadioDX
9 ай бұрын
Give it a go mate 👍
@JamesHannibalKH2SR
9 ай бұрын
Cool! Cant wait to see what other creative firmware comes out for this little gem.
@tomperone9338
9 ай бұрын
Yeah, been playing with the AM FIX mod for several days now, and it basically took the Air Band from being unusable to clear as a bell. Looking at the code, it appears to have been a gain problem.
@HamRadioDX
9 ай бұрын
Yeah.. I still notice on super strong signals that it's still just a hint of distortion, but still perfectly readable.
@WarrenAkerman
9 ай бұрын
@@HamRadioDX i also set the AM freq's all to NARROW. The audio is now even more clearer than when it is set to wide, with less distortion. Also seems to be more sensitive on narrow.
@michaelmilenkoclewes572
6 ай бұрын
mine arrived today its off to be modded tomorrow love it for the price
@jcramond73
9 ай бұрын
Awesome video mate, this unit makes it the cheapest receiver for Aircraft ! Just remember folks, these radios are not approved for use on Australian bands, so buyer beware. 👍
@HamRadioDX
9 ай бұрын
Yeah mate! RX only!
@paulg7763
10 күн бұрын
@@HamRadioDX are they legal to own and operate in Aus as long as you don't transmit? Edit: Sorry! I missed the part where you explain it perfectly!
@leejenkinson5521
9 ай бұрын
Ideal for me, as I only want one for my backpack to receive right now!
@UD503J
5 ай бұрын
Same here. This is a lot more compact than the PRO-97 I used to use for airband and I can recharge it via USB.
@RingwayManchester
9 ай бұрын
Nice one brother
@HamRadioDX
9 ай бұрын
Thanks Lewis 👍
@dannyshortwave
9 ай бұрын
Nice mod indeed. Thank you. 👍
@randyhavener1851
9 ай бұрын
Excellent!! I can't wait to try it! Thank you!!
@eddiedowning2571
9 ай бұрын
to me it seems to scan faster i still have the same meter need to figure out how to get ssb mode
@Peter_1512
9 ай бұрын
I have a UV-K5 that came with the .25 Firmware. I downloaded the Firmware updater and that came with the .26 Firmware. I updated to the .26 Firmware and UVMOD is working fine. Now, on the Quansheng website is a newer Firmware listed for the UV-K5, version .31. I installed that version and it works fine. However, UVMOD doesn't seem to be working with that Firmware. I upload that Firmware to UVMOD, patch it and then download the patched version, upload it to the radio and then the radio doesn't turn on and I have to re-flash back to one of the stock Firmwares. I assume they changed something in the .31 Firmware?
@Dav3Plus
9 ай бұрын
UVmod is based on .26 code, the .31 lines of code probably won't match as things are added/removed prior to compiling!
@jbbosselut
9 ай бұрын
For Air band is that the step 8,33 khz ? Thanks
@DonzLockz
9 ай бұрын
Awesome! I will do it on all mine. TY
@HamRadioDX
9 ай бұрын
Have fun!
@Scotscan
9 ай бұрын
Cheers for the video mate - I'm the same as you. My unit does not receive on the HF at all - I don't think some of the chips have the wide band facility and we were the unlucky ones. I tried a small test to transmit on 27.780 FM from my 7100 and can't hear anything even in close proximity.
@Scotscan
9 ай бұрын
**Edit it does work but you need a resonant antenna and a careful tune of the gain settings
@ralee3422
8 ай бұрын
Once the Mod is done, how do you actually access the Airport frequencies? Is there more than one? If yes can the radio scan all of them? I'm new to this I'm sure you can tell. I've already used the menu to turn the Air Fix on. Not sure what I do now??
@HamRadioDX
8 ай бұрын
Google is probably your friend... Google your airport "tower frequency" and see what comes up - or you can use the scan function of the radio to find an active frequency.
@virgilwalker683
8 ай бұрын
I do like the video, I am not blasting on your video. I use the Boafeng UV-5R 10 watt, and I love that radio. I also have a couple of other cheap models from China. I use them in a emergency situations.
@FredStam
9 ай бұрын
thanx for this video, tomorrow i wil update the firmware for AM use nice. I paid not that much for this radio nnot 30 dollar but 17 euros so it was cheap. Depent on the country I think. 73 PE3FS
@HamRadioDX
9 ай бұрын
Have fun! Let me know how it goes
@Dougsterxplor
9 ай бұрын
I've done the firmware but not getting the S meter. Everything else seems to be there but still seeing UVMOD meter.
@HamRadioDX
9 ай бұрын
Which version did you use?
@Dougsterxplor
9 ай бұрын
@@HamRadioDX egzumer v0.16. Sent you an Instagram pic.
@lolhoss
9 ай бұрын
@@HamRadioDX I just flashed 0.17 and I'm not seeing the new S meter either but everything else is great! It seems to be holding on to an older version of the S meter I got from a different mod fw.
@lolhoss
9 ай бұрын
It looks like 0.13 and older have the S meter in this video. 0.14 and newer have the piotr022 style S meter
@secretsquirrel7788
9 ай бұрын
which one of the links is the air band mod
@Commercialaviation747
Ай бұрын
GOOD man !
@SpookieNZL
9 ай бұрын
Also Meant to ask, are you using the custom online flasher and what did you enable? Does the kastest include the AM reception Fix?
@HamRadioDX
9 ай бұрын
I downloaded the bin file and flashed using the UV mod by whoismatt website. I haven’t tested the latest, I was using v0.8 I haven’t tested the latest as I flashed mine a few weeks ago
@Arijit_VU3ICT
2 ай бұрын
Which version of firmware update is needed to fix it
@user-ph3dd7yi1d
9 ай бұрын
Can it be used with Quansheng UV-K6? fix
@bigwill4423
9 ай бұрын
There is no mention of the "AM Fix" on whosmatt latest firmware. Where is everyone getting this fix from or is it included in the latest firmware but not mentioned in the list? If that is not the case can you provide a link to where you got the firmware version with the "AM fix" mod? Cheers.
@HamRadioDX
9 ай бұрын
I was using v0.8 here - github.com/egzumer/uv-k5-firmware-custom/releases I use whoismatt UVMod page just as an easy way to flash
@bigwill4423
9 ай бұрын
@@HamRadioDX Thank you! 😎👍
@handfetisch
8 ай бұрын
I wish it would show up on that because I like its customization options. I guess I should compile my own version...
@jsnprstn
8 ай бұрын
You say this is for the K5 but you seem to be holding a K5(8)/K6, certainly not the same radio your affiliate link sells. Which is it?
@HamRadioDX
8 ай бұрын
A K5(8)/K6 is the same radio as a UV-K5 only they changed the backlight, screen and button layout. The firmware works on all flavours of this radio,
@jsnprstn
8 ай бұрын
@@HamRadioDX thanks for the response! I had read that but wasn’t sure how accurate it was. Makes this product line a bit confusing when you’re just getting started.
@islaws4589
8 ай бұрын
Hiya, am interested in one of these for motorcycle comms when touring but also fancy the airband upgrade as a bonus. Can you turn the backlight off to save battery?
@crezzlin
8 ай бұрын
I have the same programming cable as shown in your video. Could you please tell me which driver I need to use? The CD that comes with it has too many to try, lol. Thanks
@hoopztube
9 ай бұрын
Hi Hayden. So I have a bit of an offbeat question. I was going to email you but i read somewhere yu don't respond to emails to much. Fair enough. So I have been a radio enthusiest since the early 90s, and Ive been subbed to your channel for a bit, which I love. I used to have my Unrestricted amateur radio license years ago in NSW ( I held a limited callsign as well as an restricted ). Now I've tried to look this up but its a bit confusing, given how callsigns are allocated, but before i actually go ring up the ACMA, I was wondering how easy it is to renew your license after a long time being unlicensed? I still have my original certificate so have the certificate number, but I am unsure if I will need to test again here in Australia after being away so long, or If I can just pay the fee, get a callsign allocated ( I see they do this now, you don't get to pick ). I was wondering do you know much about this situation these days at all and if you could give some advice? By the way I just bought a UV-K5 and programming cable to add to my radios. Mostly I play with receivers and SDRs, which are amazing tech compared to the radios I started with in the late 80s! I appreciate any feedback you give on this. Keep up the good work mate with the channel!
@HamRadioDX
9 ай бұрын
Hey mate, The AMC are currently in charge of allocating callsigns (until at least Feb 2024 - then the ACMA will be taking over). All that should be required is to show your original certificate and that should suffice to get an Advanced License - pretty sure that’s the equivalent for the old unrestricted. www.amc.edu.au/industry/amateur-radio If you’re happy to wait a few months - you might save some dollars doing it through ACMA once they take over the exams and callsign management - there will be no annual fee for a license and you’ll only need to pay for the allocation of a suitable callsign.
@hoopztube
9 ай бұрын
@HamRadioDX Sounds easy. When is ACMA taking over? I'm happy to wait. Been thinking on and off for a while about getting the license back.
@HamRadioDX
9 ай бұрын
ACMA have proposed to take over in Feb 2024. We’re waiting on further updates from them. You can subscribe to their newsletter here which will keep you up to date on the changes - www.acma.gov.au/subscribe-our-newsletters Be great for you to get back into it! We’re almost at the top of Solar Cycle 25 so the bands on HF have been 🔥
@hoopztube
9 ай бұрын
@HamRadioDX Thanks for the info. Did some googling on the proposals, and it seems if they deemnit be, people reapplying may need to take part of the practical exam again. Hope that doesn't mean Morse at 15wpm! No way I could do that again?
@Tjita1
8 ай бұрын
Installed 0.19 and it works splendid, except FM reception now sucks, which was chrystal clear before. Am I missing a setting?
@giant357
5 ай бұрын
i can't get rid of the hissing sound in backgrowund with am even if i get this firmware, so i wonder should i do an extra flashing for it?
@serge3990
9 ай бұрын
Hello Merci pour cette vidéo 73's F4JMU Serge
@anthonypope8429
7 ай бұрын
Hi good video can you get the 27megs on the am -fm CB band I do have quansheng uv-K5 and the UV-K6 this is the newest model for 2024 do I need to change the steps for the airband like you said it comes over quite bad I don't have my ham licence yes I only like to monitor the air band most of my hand held are uniden bear cat just scanners I do have some ABBREE and baofeng my uniden scanners the battery's drain to quickly I am just trying to get my head round the quansheng and only using a 108-136 antennas cheers for any help
@WyeindependantMedia
9 ай бұрын
hey ive just done this MOD but the radio no longer transmits on the UKCB 27mhz band. Cant seem to find a way of making it TX anymore, any suggestions.. ?
@TCOEDUCA
3 ай бұрын
I can’t download the firmware
@Ressy66
2 ай бұрын
Nice radio, spectrally clean too, closest harmonic is 49db down on 2M, no harmonics detected on UHF at all. Relatively sensitive - but using it on non ham bands is strange, full scale signals wont open squelch even with SQ set to 1, hit monitor to open it all up and bang, rock solid crystal clear, there is no ctcss or DCTS either, this is an un-fw-moded radio, its TX expansion was enabled in chirp, wonder if anyone else sees this on mod'd or unmod'd version this is (8) variant, good one to try is 477.400 uhf CB 40 (Aus), signal generator is clear tone when you hit the mon button, drop it back to normal and even a -70dbm signal wont open it up (yet on ham bands a -132 DBm opens up SQ 1 on both call chans), the same weirdness applies to VHF marine, BUT Airband works, it opens the SQ normally, I even changed the generated tone freq from 1K to 800 Hz incase there was some weird conflict. Hayden, have you tried sig-gen'ing these units out of "normal" band? (my tests are using tinySA ultra) (incidentally, if I try AM signal on 477.4 it does open, just not on FM)
@daytona1212
9 ай бұрын
So, which one is the airband fix in Github? Is it the release release v0.14 ?
@HamRadioDX
9 ай бұрын
I used v0.8 and I think the Airband Fix is implemented in all firmware's after this.
@daytona1212
9 ай бұрын
@@HamRadioDX Great, thank you very much!!
@LeoLaRock
9 ай бұрын
I wonder if its possible to create firmware for Quansheng which could allow radio show images from weather satalites or video from leaks from cable tv. I wonder because where I live I picked up signal leak I notice by scanning with my Baofeng couple years ago when I notice audio from TV channel
@sbright33
9 ай бұрын
I flashed v0.16. Are there any features from UVMOD that are missing and desirable?
@GregR361
9 ай бұрын
Does the Airband fix carry over to the later updates?
@HamRadioDX
9 ай бұрын
I believe so yes
@kd8bxp
9 ай бұрын
I picked one of the UV-K5(8) up off Aliexpress, It just didn't work as well as the UV-K5 I have. It doesn't receive any of the NOAA channels, It's FM broadcast receive was maybe in the shortwave band (?), and only got one channel - on many different (indicated) frequencies. I used my UV-K5 to do the OTA clone, thinking maybe a hidden setting was causing the issues. Interesting enough the clone changed the opening screen from Quansheng to Anysecu (my UV-K5 is the Anysecu model), I am now able to get FM broadcast, but it seems like it's off freq quite a bit. Still no NOAA channels, and AM is sort of working now. The UV-K5(8) came with European style base charger, I was thinking maybe it was setup for use in the UK, but I don't see any way to change it to US usage. I've always been hesitant about third party firmwares, but in the case of this cheap radio, I don't see how it could make it worse. And might actually make it better. Thanks for the video.
@HamRadioDX
9 ай бұрын
No worries thanks! Yeah I can't vouch for any of them off Aliexpress - perhaps a copy or a defective unit?
@kd8bxp
9 ай бұрын
@@HamRadioDX Brief update, these are weird radios - I put the stock antenna on it - and FM and NOAA both work. I put the ABBREE antenna on my original UV-K5 - and no FM or NOAA. I also tried a couple other antenna (which I know are good antennas) on the new UV-K5(8) and UV-K5 radio, no FM - NOAA worked thou. But the stock antenna appears to work the best on this weird radios. PS. It was very cheap on Aliexpress, I wouldn't be surprised if it wasn't a knock off - but if it is it's a fairly good physical copy. Also it took the 3rd party firmware without any issues or problems (very easy to upgrade honestly) And easy to go back to the original firmware if needed.
@eddiewalker4530
8 ай бұрын
Is there a menu or button that will take me to Airband, I can’t seem to find any info on it? Thanks in advance
@rob9447
8 ай бұрын
Hello - please excuse my newbie questions. I got the UV-K5(8) for £8 from Alibaba maily to listen to air band as i have several local airfields and the Luton flightpath above me. Given how cheap this was I have no problem trying the firmware update, for fun really. But my question is: can I use the handset as a license free PMR446? Is there an issue with broadcast power for license free with this? If I can't use the PMR446 I will disable Tx completely - which I think I can do with the patch. I've never owned any kind of 2 way radio before so excuse the questions.
@ajs5018
7 ай бұрын
Luton in the UK? I m waiting for mine to arrive. I believe you can use it as a walkie-talkie on PMR without a licence between 446.0 and 446.2 Mhz. Outside that you will need a radio amateur licence.
@ryanmigliori660
9 ай бұрын
I have 2 qyt 58 radios cb radios and they distort on am transmitt. But there clear on fm. I wonder if there is a fix for them Otherwise I just gotta sell them cheap or throw them away.
@VK7DBX
9 ай бұрын
It's amazing how different AM airband reception for us both is. (Must be those couple of extra hill between my location and the pirt) Quick question, is the tower transmitter in Hobart actually at the airport? Or is on Guy Falks/ Mt Rumny?
@HamRadioDX
9 ай бұрын
The tower transmitter is at Mt Rumney. But I can still hear planes on the same channel directly
@grahamjohnson573
8 ай бұрын
Can the uv-5r receive us military on the 300 to 400mhz?
@russellwilson5246
9 ай бұрын
hi thanks..will it also transmit on airband in aus?
@HamRadioDX
9 ай бұрын
No it won’t TX Airband and that’s also illegal using this radio
@russellwilson5246
9 ай бұрын
thank for teling me it wont transmit on air band however the information that it would have been illegal is incorect here in australia acording to the authority i contacted.@@HamRadioDX
@HamRadioDX
9 ай бұрын
How so? Is the handheld type approved for Airband operation by the ACMA?
@spaceflight1019
9 ай бұрын
Another heads up: when I tried to flash it it loaded about 10% before the Dell Latitude Windows 10 gave me the blue screen of death and rebooted, bricking the radio. It did it again after it rebooted. Third time is the charm... Make sure you are running the pre-2012 Prolific driver for the cable before you brick the radio. Once I installed it the radio programming was a snap.
@DataDev
8 ай бұрын
I think I bricked my radio, it won't turn on normally anymore. Is it possible to unbrick?
@spaceflight1019
8 ай бұрын
@@DataDev The first step is to make sure that you have the right driver for the programming cable installed. If you are getting a message about support ending in 2012 just copy and paste the error message into Google and you will be able to get the correct driver.
@DataDev
8 ай бұрын
@@spaceflight1019 I'm not getting any message about drivers, I just put the radio into programming mode and tried to flash it, but it stopped at around 5% and now the radio will not power on
@spaceflight1019
8 ай бұрын
@@DataDev Go into the Device Manager menu with the programming cable plugged in, and take a look at the date on the cable driver. I'm using a Baofeng cable and the best driver for it is from 2007.
@n1kkri
9 ай бұрын
Does anyone know if the firmware with SSB also has the AM fix?
@wapphigh5250
7 ай бұрын
Hey everyone - can you get an Aussie Ham license off that linked ham radio prep course?
@HamRadioDX
7 ай бұрын
No US only. If you want to do a Aussie ham radio course, check out these: Contact for regular online courses: www.silvertrain.com.au/ res.net.au/ www.wia.org.au/licenses/foundation/foundationmanual/
@andrewbrown9437
8 ай бұрын
а без перепрошивки эта рация ловит самолёты? Вот взять из коробки и послушать?
@jimygerilius2377
8 ай бұрын
Where did you get the "ON AIR" sign in the background of this video?
@HamRadioDX
8 ай бұрын
Amazon, it's somewhere on my page here - www.amazon.com/shop/hamradiodx
@starraider25
9 ай бұрын
Hey, I've finally figured out how to change bands. BTW, will the mod work on my K6 quansheng?
@yoshy2628
9 ай бұрын
1:11 - if you check the video - he holds in his hand a K6 version, the answer is yes.
@3kdn
9 ай бұрын
Is it the BAOFENG programming cable you need for this? d to find a Quansheng one, but to no avail.
@HamRadioDX
9 ай бұрын
Yeah a Baofeng (Kenwood) 2 connector programming cable will work
@zl1rdnz
9 ай бұрын
Please advise which link is the AIR BAND firmware update.... the links on this page do not identify that upgrade, thanks Rob, ZL1RD
@HamRadioDX
9 ай бұрын
I had v0.8 firmware installed but I believe all later versions after this still have “AM fix” implemented
@zl1rdnz
9 ай бұрын
thank you
@taxineil1
7 ай бұрын
Does the fitted antenna work on airband or does it need replacing and if so what would be the best one to buy?Anybody know?Thanks.
@UD503J
5 ай бұрын
The stock works ok if you're closer to the airport and have line of sight. Of course range depends on where the transmitting aircraft is (on approach, on the runway, etc.,) in relation to you. I have an old Diamond 2m band antenna (RH77 I think) that I used to use on an old Radio Shack scanner. I just have a BNC to SMA adapter and this also works pretty well. 2m is close enough to airband that any decent 2m should work pretty well for ATC reception. Also helps if you want to listen to milair frequencies since those are typically in the next harmonic.
@secretsquirrel7788
9 ай бұрын
is the air band fix in the menu when the firmware is patched
@spaceflight1019
9 ай бұрын
Just a heads up...the link you provided features a "flash with a browser" option.
@HamRadioDX
9 ай бұрын
Yeah that's new
@spaceflight1019
9 ай бұрын
@@HamRadioDX It actually works well, as long as the proper driver for the cable is installed.
@deniskukic3941
7 ай бұрын
Is 18mhz unlocked in this software?
@bouncehubuk
8 ай бұрын
does this work on uv k6?
@kristofferwilliams9963
6 ай бұрын
Is there a best way that we can get a radio operators license online in Australia?
@HamRadioDX
6 ай бұрын
Contact Fred VK3DAC at Trainsafe - he runs online courses over Zoom regularly. www.silvertrain.com.au/
@TheUberdude187
9 ай бұрын
Much better but to be honest it was perfectly legiable to me
@ramjet4025
7 ай бұрын
As you say, its AM lacks dynamic range. Here is my tip. If you want to listen to Air Band AM , get an Aicraft radio especially if you are feeding it to others. The OLDER Aviation radios have better sounding audio. The Rolls Royce are the King Bendix older style like the KY196 and its audio is better than you get in the latest aviation radios.
@WEOWNTHESKIES
7 ай бұрын
Is there a way to have this firmware mod as well as TX in airband? I want to use this as a backup radio in my plane and I need to listen AND TX.
@WEOWNTHESKIES
7 ай бұрын
When I have this installed I cannot tx anymore.
@HamRadioDX
7 ай бұрын
The radio won't TX in the airband. It's power amp is not broadband enough and it wouldn't be certified for use in the airband.
@W-733_KWX
7 ай бұрын
Buy a radio that IS intended for Airband please.
@lastsupper6968
6 ай бұрын
50 $ Canadian for this great radio from temu
@19TC504
9 ай бұрын
i dont see the airband fix in your link?
@HamRadioDX
9 ай бұрын
github.com/egzumer/uv-k5-firmware-custom/releases Scroll down, you'll see it in the changes. I used v0.8, but later versions include it
@drakeblackk
9 ай бұрын
Well, the AM thing works for sure, but can anyone help me out? I unlocked "F Lock" but when i press PTT on a CB channel, it says TX Disabled... What did i forgot? It was working with my last used firmware, its so irritating.
@costy91395139561
9 ай бұрын
You might have AM demodulator activated. You can't tx with AM demodu on
@drakeblackk
9 ай бұрын
I mean on USB 27.305@@costy91395139561
@SpookieNZL
9 ай бұрын
Which firmware did you apply? V0.16?
@HamRadioDX
9 ай бұрын
The firmware that I have is an older version v0.8. I have yet to try the newer ones, I didn't realize they have even more releases now!
@SpookieNZL
9 ай бұрын
@@HamRadioDX Perhaps if you are able to create a new video showing the Firmware and see if it includes the new added AM Fix? Thanks from across the Ditch KiwiLand lol 73
@adivor9993
9 ай бұрын
chirp not work with this firmware
@bitemykrank1970
9 ай бұрын
Another way to clean up the AM reception on these radio's is to use a better antenna for that band. the little rubber ducky antenna isn't even CLOSE to the airband frequencies, but a 55cm long antenna makes a world of difference. Paul from Slovakia - OM0ET, uploaded a video on his channel about a new firmware aswell, it supposedly fixes the SSB reception along with some other improvements. ITS NOT this firmware your using. It might be a different option for some people. I have installed it on my Quansheng UV-K5 and my KSUT UV-60D, both the same radio, just a cosmetic and name change on the case. It seems to work OK, but as with all these firmwares, it's not perfect. After installing, you push the function button, then button #5, then use the function button with the FM button and you can scroll from FM to AM to SSB, I'm still trying to work out how to get the desired frequencies to be easily accessed. I can enter an airband or six meter frequency via the VFO, but as soon as I enter any of the expanded displays shown in these KZitem video's, such as the spectrum, the frequency is simply random, usually 5-10Mhz away from the channel selected, and the ONLY way to adjust it is by 10Khz steps, it takes FOREVER to get from 136Mhz down to 127Mhz at so small a step, and once the radio DOES get down there, any further button use makes the frequency jump to a random spot on the band, or even to another band entirely. It can be a pain in the arse at times, but for less than $50 delivered, both of these radio's are fine with me.....I cannot afford to buy a $3000 radio to to get these bands, and a scanner is better for airband anyway, as this radio can only use ONE CHANNEL at a time and it's VERY difficult to make a scan list on them for anything other than the 2m or 70cm bands. They are fun though. Shame the cheap upgrade antenna's usually have an SWR of about 12:1, I have a box full of unusable SCAM Nagoya NA-771 clones that are so wildly out of tune all you can do is laugh about it, good thing they only cost $0.70 each. They say HAM radio is a fun hobby.....
@HamRadioDX
9 ай бұрын
Thanks for the info! I found that you need to press the PTT button once you're in the spectrum view to get this "capture" screen where you can enter and adjust the frequency more easily.
@ominkan3129
9 ай бұрын
In SSB mode FUNCTION then 5, press the PUSH to TALK button which switches the screen VFO and LNA mode, then press 5 again the display changes to a line to enter your frequency, example: 024 then press the SCAN button to get your . then press the rest of the frequency 000000 and then press the MENU button to enter the frequency you just keyed in.
@bitemykrank1970
9 ай бұрын
@@ominkan3129 Thanks for the info. The modded firmware is one thing, finding a guide to use it is quite another.
@ominkan3129
9 ай бұрын
@@bitemykrank1970 Your are very welcome. I hope it helps. It took a while to figure out all the new things the keys do in SSB mode. On the outside antenna it really picks up stations. I was surprised. Take care, enjoy.
@virgilwalker683
8 ай бұрын
We defunded the police here in the US, ain't no one going to jail for transmitting without a license, I do it everyday. the FCC isn't going to do anything about it either
@HamRadioDX
8 ай бұрын
Good luck champ
@t.c.2776
9 ай бұрын
What's your distance to the airport?
@HamRadioDX
9 ай бұрын
About 10 miles
@Subgunman
4 ай бұрын
Now if it could transmit on air band, wouldn’t have to spend big bucks for an air band unit.
@davidhubbell9643
9 ай бұрын
Thanks for the update. Will this radio transmit on 40MHZ band and if so how many watts after firmware mod?
@HamRadioDX
9 ай бұрын
No it won't TX that far. The PA is not broadbanded enough to cover that, and even if it did, it would be extremely inefficient and spurious unfortunately
@choppergirl
9 ай бұрын
50Mghz to 600Mghz... so um.. no shortwave 1.6Mghz to 20Mghz and no scanner frequencies... which is like 700Mghz to 960Mghz (I think from memory). Okay without those two, what's the point of this radio. Maybe if it could actually transmit on the aircraft band, as a dirt cheap better than nothing radio for an ultralight aircraft pilot radio.
@AMC401
9 ай бұрын
Are you able to transmit on airband such as 121.5 for emergency use ?
@kp-od8ji
9 ай бұрын
I wouldn't even think about it.
@W-733_KWX
7 ай бұрын
No transmit on airband for God's sake! Unless you have a license or authorization but then you are supposed to have the gear from the airport...
@AMC401
7 ай бұрын
Oh I tested it , barely audible 20 feet from my airplane. Throw me in jail buddy. @@W-733_KWX
@davidcottee2808
9 ай бұрын
Does it have a transmit lockout on Air Band? Or bands outside the amateur frequencies?
@handfetisch
9 ай бұрын
This can be customized. The default recommended settings locks out air band.
@learntotie8972
9 ай бұрын
The channel scanning is very very fast.
@user-oi3zi8rr9x
8 ай бұрын
returnredreturn (freq + (step + 1) 2) step * step; int32 t TX freq check(const uint32 t Frequencyreturn 0 if TX frequency is allowed// otherwise return '-1'return 0; if (Frequency < frequencyBandTable[0].lowerFrequency > frreturn -1.not allowed outside this range if (Frequency >= BX4819 band1.upper && Frequency < BX4819 bancreturn -1; BX chip does not work in this range switch (gSetting F LOCK) case F LOCK DEF:if (Frequency >= frequencyBandTable[BAND3 137MHz].low(return 0;if (Frequency >=frequencyBandTable[BAND4 174MHz].1 the air bond tranceiver has been cracked
@mpol701
9 ай бұрын
On airband does it low 8.33 kHz spacing?
@mrhairypalm5006
9 ай бұрын
👍🏻
@virgilwalker683
8 ай бұрын
You only need license when you transmit on repeaters or if your talking to someone else who is licensed. The fact you can buy them, use off channels with other members of the community as a com when hiking, camping. As long you are not on a emergency channel. You don't a license unless you are on a repeater or emergency channel or military channel. Other than that, the FCC is not coming after you. Remember, Repeater! Emergency Channels! other than that, you can transmit on private channels as walk talkies. There are no said laws that violate. Unless your in the UK, their laws are petty AF LMFAO, but you know what I mean. Of course if you want to talk to the members of the HAM community you need a License. but if you using these types of COMS for Hiking, camping and stuff like that, you don't need a license period. You should explain to your viewers what that license is for and how it applies to that radio. There are Millions of people around the world who use a HAM radio without a License and they not in jail or charged with criminal offences. there are certain situation like talking on repeaters, emergency channel, the normal stuff you would need a license for.
@HamRadioDX
8 ай бұрын
You’re misinformed and uneducated. You need a license…
@DigicraftSigns
3 ай бұрын
i paid £14 from ali express with upgraded antenna D77. ear piece headset with mic. charger/ dock. separate cb microphone and programme/ charging cables :)
@brettemurphy
9 ай бұрын
Has anyone tried this on UV-K6?
@howardgipps7351
9 ай бұрын
Works very well on my uv-k8, which I think is identical to the k6 internally.
@user-em6vi6sj7p
9 ай бұрын
@@howardgipps7351 You mean UV K5 (8) or is there a new K8?
@howardgipps7351
9 ай бұрын
@user-em6vi6sj7p sorry uv-k5 (8)
@brettemurphy
9 ай бұрын
@howardgipps7351 Thanks, I tried it today and it worked fine with the web flashing tool and my multi-purpose programming cable that I use on the UV-5R
@Tyracer1976
9 ай бұрын
It's not work wiht the UV-k6, i try 3 different way and will not update ...
@saxpert
9 ай бұрын
AFAIK it's even forbidden to listen to airband for ham user in Germany.
@smug_cat1
9 ай бұрын
How they gonna find out 😂😂😂
@user-em6vi6sj7p
9 ай бұрын
@@smug_cat1 The Stazi will beat it out of you
@smug_cat1
9 ай бұрын
@@user-em6vi6sj7p gestapo
@kp-od8ji
9 ай бұрын
Yes, be careful! Nancy will grab you by the ass.
@urbexgamma
9 ай бұрын
No TX on CB frequency's :(
@MdmKamen
9 ай бұрын
Look for another firmware, mine can TX 27MHz AM.
@Clinton_Cann
9 ай бұрын
Not bad for a baofeng
@user-oi3zi8rr9x
9 ай бұрын
it's 10 dollars in China,not 30
@DonauweIIe
9 ай бұрын
16€ new, including delivery in germany. It sounds detailed and well intelligible in ssb voice in 14200KHz like an expensive new hf sdr amateurradio very good for that price.
@nejcs56ne95
9 ай бұрын
@@DonauweIIe14200 is not inside the range as far as I know
@user-oi3zi8rr9x
9 ай бұрын
18-1300Mhz@@nejcs56ne95
@user-oi3zi8rr9x
9 ай бұрын
China is a industry beast,same weapon in China price is 1% of in US@@DonauweIIe
Пікірлер: 202