There was a little bit of me that was whispering 'start it , I want to hear it' .... bitterly let down lol Great video though.
@GordonThompson
2 жыл бұрын
You can hear it on Kevin Armstrong's channel. He's got one installed on his trike. kzitem.info/news/bejne/qW56u5mog6qapZg
@stephenrickstrew7237
2 жыл бұрын
I just had to be the first to say how much I enjoy learning about aviation from your channel …!
@homertalk
2 жыл бұрын
Everyone Loves Chip Erwin!! Legend!!
@stolaircraftsuyanto9728
2 жыл бұрын
thanks Johnson for sharing this great video
@robinj.9329
2 жыл бұрын
My Grandfather (born in 1898) built a single seat monoplane in the late 1920's powered my a motorcycle engine! So this looks very familiar to me.
@F111BMATHIS
2 жыл бұрын
I bought one of these engines at Oshkosh 2022, waiting on the wiring harness to get modified as an aircraft harness and I still need exhaust, radiator, engine mounts, the list goes on! But it'll be installed on a slipstream and if it works out, I may try putting one on my MX Sport.
@spikekavalench
Жыл бұрын
Keep us posted!
@jcjammer1
Жыл бұрын
MX Sport II ?
@mervynsands3501
2 жыл бұрын
Very nice, fits the bill, got plenty going for it, ideal in most situations 👍
@kennethperian4370
2 жыл бұрын
Nice 60hp and showing telling, keep on showing telling them I might buy one never know.well thanks see ya next time see ya by
@Wingnut353
2 жыл бұрын
Direct from factory no testing straight out of the box... basically a Harbor Freight special if you know what I mean. Everyone else doing conversions is at least blueprinting every engine and making sure they are to spec.
@ik04
2 жыл бұрын
I've always wondered how the uneven power pulses from a 72 degree V twin affect the drive train and propeller. I guess the PSRU and belt dampen some of that out...
@KevinArmstrong4154
2 жыл бұрын
It's 80 degree, very snooth at high revs
@Pushyhog
2 жыл бұрын
i ran my harley davidson engine test stand at sun n fun few years at forum white tent engine area. it was pusher! Mr.Cox put it in sport aviation mag.
@joedoakes8307
2 жыл бұрын
Will you please SHOW US the left side and back of the engine !
@theworshiptraveler6709
2 жыл бұрын
Chip didn’t seem to be his chipper self today. Lots to do I guess. Great engine.
@anthonyburke5656
Жыл бұрын
This meets ALL my criteria, thinking people
@speedboard.
2 жыл бұрын
How much does the engine weigh?
@joepiet
2 жыл бұрын
I've had some experience with the Cuyuna belt reduction system, and they had high breakage of crankshafts. Side stresses.
@kylegoldston
Жыл бұрын
Well the amount of force required to tension such a comically oversized belt is the culprit. These engines were designed to mount to a precision transmission. Not to be side loaded with that belt tensioner.
@stevehoward3123
2 жыл бұрын
What does it weigh?
@mikeryan6277
2 жыл бұрын
I just kept picturing a old Harley Knucklehead hanging off that mount with a similar Red Gear. Hmmm.
@rossbrumby1957
Жыл бұрын
Wheels through time have a plane with a harley engine in one of their videos.
@raydreamer7566
2 жыл бұрын
What a great motor package for many different applications . Is the reduction drive a cog tooth belt type ?
@spikekavalench
Жыл бұрын
Can you supply one in a pusher configuration for the Challenger II?
@mirkopg69
2 жыл бұрын
Funny coincidence...my first car, 2 door 800 cc , 60 hp , 4 passenger, fiat panda 1987 , at this point I can convert lots of engine....maybe not,...but very interesting solution 👍
@kylegoldston
Жыл бұрын
Well the amount of force required to tension such a comically oversized belt is the culprit. These engines were designed to mount to a precision transmission. Not to be side loaded with that belt tensioner.
@F111BMATHIS
Жыл бұрын
Chip sent the the modified wiring harness, I think it was just a proto-type as it came with no tubing covering the wires. Also had an issue with one of the wires ( a brown one, not sure for what ) was cut and missing about 1/3 of the copper strands. I think their testing guy may have forgot to send the regulator 2 pin connector that connects the regulator to the battery, may have left it connected to the test stand, and the cut wire I'm sure was from wiring an entire harness for aircraft. Anyways, talked to Chip today and he's sending me a new harness when they come in ( First week in December?) So should have the connector with that and I'm getting a new regulator (will send mine back, it works, just had a little road rash, didn't know it till we opened the packaging) And lastly, I finally found the Make and model of the engine and a web site that sell parts, though not as good as what Merlin has. I'll have to modify the exhaust, not sure the muffler is the same (it could be) and the fuel pump is definitely not as good as the V-twin style Chip sells.
@tCCZebra70
2 жыл бұрын
Custom reduction drive good for 90 hp.... is this set-up now at 90 hp or is the drive just good for a more powerful engine than it is sitting on? I remember this V-twin being 61 hp or so before, is that still the case? Love the Merlin PSA and can't wait to try one with the V-twin!
@aquaticthumb5193
2 жыл бұрын
So inexpensive a lsa twin if allowed would be possible. Kitfox twin how cool is that.
@nashfan1000
2 жыл бұрын
Sure would like to see some good clear pictures of instrument panel layouts. On the Merlin site they show an eight and a half inch mgl display is available just wonder what other instruments you put in and if there's room for their VHF control head don't like everything going through the efis
@kenhurley4441
2 жыл бұрын
I have a 582 Blue Top on my T-Bird II. Maybe I need to sell it and buy one of these!
@Mike-01234
2 жыл бұрын
Add a small turbocharger to that V-twin get high altitude performance. Lot of aftermarket turbocharger kits for those Side by Sides might be one already made for it. One of the drawbacks of 2 strokes can't add forced induction.
@AnDrEw122100
2 жыл бұрын
You can , my snowmobile has one , Polaris 850 patriot boost google it , it’s for riding in high altitude the turbo compensates for altitude so I have all 175 horsepower at 3000-4000 feet as I do at sea level .
@georgethompson4098
2 жыл бұрын
How long has the engine/propeller been on the test stand at full throttle? Is the propeller dynamically balanced?
@henryware9440
2 жыл бұрын
Have you done any experimentation with turbocharging? :)
@Big.Ron1
2 жыл бұрын
Do I understand this will go on the baby Merlin? That would be a performer I think.
@mervynevans5176
2 жыл бұрын
Cuánto pesa ese motor ya terminado con su hélice
@TerboBlitz
2 жыл бұрын
Does it run at an acceptable operaturing temperature in a pusher (trike) configuration?
@KevinArmstrong4154
2 жыл бұрын
Mine does, oil circulates past water pump so reckon they exchange heat there
@mattivirta
2 жыл бұрын
need 200 and 300hp engine same little baggage. can change old cessna or cherokee six etc. new engine less than 10 000$ have perfect engine
@pylon500
2 жыл бұрын
V-twin vs 582? I'm thinking heavier instal, more vibration (unless it's even heavier with balance shafts), looks like single ignition, and less power... Better get in on the 582 stock before they all go.
@TheJustinJ
Жыл бұрын
I think if you factor in two or three hours endurance worth of fuel into a combined propulsion mass, you will always find four stroke, EFI to out perform Two-Strokes for power/weight in every case. Then consider on a long trip you must also bring two-stroke oil to mix into your fuel, this additional weight must be brought due to the fact no FBO along your route supplies it. A Rotax 582 is a good snowmobile engine converted to UL aircraft use. But its a 1980s concept that pre-dates Multi-point EFI/ECU control. This setup, as proven by that one genius tinkering Bloke from the UK, seems to have a lot of merit for this type of use.
@jamesmorton7881
2 жыл бұрын
Engine RPM at 75% power? RPM at max torque?
@TheJustinJ
Жыл бұрын
If its an 800/850 by GK Gaokin, its torque is very flat from 3-6k. Peaks around 4-5,000. Same RPM range you will find 75% power. Red-Line is up around 6-6,500. Peak power is 6-6,250.*edit There are now multiple redrive/PSRUs available on the market for around $1k each. The basic motors are $2k from china, plus international freight, customs, wait time, and might not get what you wanted and probably cannot return it. So, these small companies who offer the product complete offer a lot of value vs doing the dozens of hours of leg work and CAD work and CNC machining yourself.
@mehmetvural8095
2 жыл бұрын
first of all good day. Is this engine 0 km? Is installation cost included?
@johnnybumpous9108
2 жыл бұрын
that engine should kill the two strokes. I would sure rather have it than any two stroke .
@whisperingeagle
2 жыл бұрын
Just great. Been hoping to see a good 50 -60 hp 4 strk replacement. Curious about weight comparison. COST
@peteranderson037
2 жыл бұрын
According to their web site it's $7,250 for the engine. The full Merlin firewall forward package is $10,750.
@whisperingeagle
2 жыл бұрын
@@peteranderson037 hey big thanks
@fhecrewdavid
2 жыл бұрын
The engine is a Gaokin 800cc v-twin (no through-shaft) and can be had for a little over 2k if you order from suppliers in China. The redrive is from Ace Aviation and costs about 1k + shipping. All up you'll be in a bit over 3k for this powerplant if you can sort the ancillary fixtures. There are a few struts that you see at the top of the redrive that I believe you'll need to make yourself or have made.
@diegoandresbustamante2742
2 жыл бұрын
@@fhecrewdavid You said it completely right. I did a 850 already some time ago and now working on a 1100cc. Both from Gaokin. For the 1100cc I am doing forged crankshaft and rods, 11:1 compression ratio, 3 angled valve seats, smoothed ports and tuned exhaust and admision for 5000rpm. Internals and new flywheel dinamically balanced and taking into account the properller inertia. Piston rings are cheap, go for a gapless totalseal replacement. Using an epropeller starter/generator system so I can save weight have a better generator for avionics and some additional power at takeoff. Using a geared inline reduction and microsquirt ECU. Nice engines but I wouldnt use them without blueprinting them first. Base engine when buying it without gearbox, ECU or injectors is 1900 USD shipped, dont remember FOB price. With the right setup you can be doing 80HP@5000rpm which will be power cruising setup. As good as a 912, 20kg lighter and at 1/3 rd of the price. But you have to do your own work to get it working right. Turbocharging is really tempting but I would only do it for keeping the power up to a desired FL... since this engines doesnt have piston oil squirters or good enough cooling to overcome more thermal load. I am considering yes to modify the oil pan to increase engine oil and improve cooling and oil degradation time.
@nashfan1000
2 жыл бұрын
Does this have only one spark plugs per cylinder and only one ignition system?
@ultralightnews
2 жыл бұрын
Yes.
@nashfan1000
2 жыл бұрын
@@ultralightnews does it also have a generator or alternator? Thank you for info
@ultralightnews
2 жыл бұрын
These it has an alternator.
@henryware9440
2 жыл бұрын
So, at 60 hp with a reduction drive, what is the HP at the prop? Thanks.
@eugeneoreilly9356
Жыл бұрын
If you know the reduction ratio then HP = Torque × Rpm\5.25.
@DeltaVTX
Жыл бұрын
60…
@wadeadams2775
Жыл бұрын
What name brand?
@parulparul6436
Жыл бұрын
how meny price this engine
@osamangrotoursierpe3268
2 жыл бұрын
Precio
@galihmaburmaburputro3352
2 жыл бұрын
Berapa harga mesin kayak gitu ya pak?
@flexairz
2 жыл бұрын
Menurut situs web aeromarine-lsa $7250 dolar.
@krissfemmpaws1029
2 жыл бұрын
Dan, I looked at Aeromarine's website found the V-twin on the site but found no technical information on the engine. So I called the phone number and got Chip, I tried to get some basic information on the engine I was told "It's all set up for the Merlin." When I said I was not building a Merlin but was looking at the engine for a different design it would seem I was hung-up on. I called back and no answer after a 6 or 7 rings I was pushed to voicemail, it's been over an hour and no call back. I could be wrong, but this strikes me as Chip is not interested in talking to you unless you are building his designs when it comes to the V-twin inspite of what he was saying in the video. If Chip gets back to me I'll update this.
@Finder245
2 жыл бұрын
Did he ever get back to you?
@sarasandoval771
2 жыл бұрын
Is this made in China?? C’mon, man….
@billmoody823
2 жыл бұрын
It's too late to complain about it being made in China. If people would have said no to China 30 years ago we would still have American choice but that shit has sailed. We are all to blame.
@rossbrumby1957
Жыл бұрын
@@billmoody823 easy to guarantee quality by converting an actual can an engine instead of using a chinese clone. No boat has sailed . Hope the little plane glides well just in case.
@TheJustinJ
Жыл бұрын
You can use whatever you want. A CanAm will cost Three times more for similar design. And they are all made in Mexico. No mass produced components are made in the USA, the EPA, OSHA, Unions, Lazy Fat Americans and College Professors killed the factories. An alternative that is assembled in the US is a Briggs Vanguard Marine EFI is a contender. Its rated 40 gross hp @3600rpm but red lines at 4,800 operates continuously at 4,750. Probably makes upward of 50hp.
@jrbailey3208
2 жыл бұрын
NO MORE Red China made equipment! Aeromomentum is the SUPERIOR CHOICE and is American Made!
@Oldbmwr100rs
2 жыл бұрын
I work for a Polaris/CF moto dealer and this engine looks identical to a CF moto UTV 800 engine. I've been seeing a lot of premature wear issues with them, but at the same time I'm finding a ton of fine dust and dirt in the intakes. It's a very dusty environment here. Having gone through a couple of the engines though, as someone who's built a lot of motorcycle engines you can see how little care was put into internal finish of the ports, valve seating and timing components. Built to a low price point..
@ultralightnews
2 жыл бұрын
You do know that the Aeromomentum is a Suzuki Engine?
@Oldbmwr100rs
2 жыл бұрын
@@ultralightnews That's really good to hear, Suzuki makes excellent small engines.
@jrbailey3208
2 жыл бұрын
@@ultralightnews What, you don't like Japanese or Korean Motors? I'm a beat up, old, crippled up, Geezer, who does what he can to NOT support the very people who are TRYING TO DESTROY US (please see ANY of the speeches by Xi Xin Ping concerning Red China's goals vis-a-vis the USA, this is NOT my personally subjective opinion)!!! I LOVE the Merlin, I've exchanged emails with Chip (whom I like and respect), the Merlin Lite is right up my alley, but the Motor Choices are what I have a problem with concerning ANY Manufacturer (aircraft or otherwise)! Personally speaking, I find that the Merlin series of aircraft tend to meet 95% of the needs of MOST pilots (PPL's, SPL's, and Part 103) in design, specs, flight characteristics, performance, and Operational Costs particularly, HOWEVER, using Red China as the source for equipment is the WRONG thing to do in my view, and I put my dollars where my beliefs are these days!
@chetmyers7041
2 жыл бұрын
@@jrbailey3208 Could you get enough power from a souped up 1/2 VW? The putt-putt on the Legal Eagles does sound great.
@whiteghost9637
Жыл бұрын
THAT'S A KOOL BUILD.... BUT A SCOOTER 🛵 BIKE RIDER WOULDN'T TRUST A *"RUBBER BELT"* 1000FT. IN THE SKY 🪂,,,, MAYBE 200FT. OVER A LAKE. 😎👍
@indigo196799
Жыл бұрын
Thousand of rotax airplane engine are flying in the world are belt driven (582, 502, 447), no issue at all with proper simple maintenance.
Пікірлер: 82