after seeing this i can now confirm the hammer spring on my texan is indeed broken before 200 rounds were put through it. nice job pyramydair.
@barrypate134
Жыл бұрын
Hey Jeremy I just bought your stainless steel carrying two for my 357 but the plastic piece that screws in behind the spring won't screw in into the stainless threads?
@AfricanAirOrdnance
Жыл бұрын
Email sent
@gjtheozzybrazzocouple3622
2 жыл бұрын
Thanks, I have a 308 standard steel tank I want to Max out this guns capability.. 4500PSI -1L CF tank.. new valve.. new springs Can you tell me exactly what I need to buy I love this gun and want more shots and more power
@AfricanAirOrdnance
2 жыл бұрын
MOAV 2022 xl 308 Super Valve 4500 psi Heavy Hammer and Magnum Hammer Spring available at www.africanairordnance.com
@maikolpinto1155
11 ай бұрын
Hello, I have a Texan Cal 357 rifle and I only hunt vermin on my farm. I would like my rifle to shoot 80g JSB pellets at about 750 to 800 fps. What do you recommend to achieve this?
@AfricanAirOrdnance
11 ай бұрын
I would say that the rife would achieve. without any modification at all a stock rifle can hit those numbers no problem
@garypitzer8729
3 жыл бұрын
Thank you for showing us this. This is the only video showing how to do this. I would love to see how to take off the pistol grip and trigger stuff. I couldn't get my cocking lever to come off even after taking out the 2 grub screws off the hammer housing. So what is the benefit of the hammer spring swap?
@myohmy111
2 жыл бұрын
There was an in-depth video on the whole procedure Gary. I saved it about 2 years ago, and for some damn reason it has been deleted! GRRRR!!
@garypitzer8729
2 жыл бұрын
@@myohmy111 Thanks for checking.
@stevenchilds8056
3 жыл бұрын
I'm struggling to figure out what part to push down on to release the hammer and hammerspring.
@andtheallstars
3 жыл бұрын
I had the same issue. what I found worked best was to remove the detent spring for the safety. Its the only spring which runs horizontal. Then it was easy to push it down and pull the hammer tube assembly out.
@stevenchilds8056
3 жыл бұрын
@@andtheallstars I figured it out. Still need to go to the range and chronograph the upgrade. I love AAO
@lukes-uf4bc
4 жыл бұрын
Shietttt¡¡!! i broke 2 times the 2 little retained screws of the interior ....do u sell this 2 replace screws??
@AfricanAirOrdnance
4 жыл бұрын
This normally happens when the gun is fired without the bottle and Valve in place cause the 2 screws to shear off email me at africanairordnance@gmail.com
@the1stkim
4 жыл бұрын
excellent video!
@gerardomonckeberg6606
6 жыл бұрын
Dear friends of AAO, changing the HS of my texan and keeping my 3000psi bottle will damage my rifle?
@AfricanAirOrdnance
6 жыл бұрын
No it will not damage your rifle
@Tony-o1b
Ай бұрын
That spring would obviously have more compression BUT how do you control valve bounce with so much preload on the hammer?
@AfricanAirOrdnance
Ай бұрын
@@Tony-o1b inline self regulating valves are not like your your normal knock open traditional valve as the inline valve stays open by using back pressure that it between the valve and bullet and only closes once the bullet exits the barrel so you don't have hammer bounce or valve burping
@Tony-o1b
Ай бұрын
@@AfricanAirOrdnance Thank you. This very handy for everyone to know as I'm sure many others are confused about this. Cheers
@AfricanAirOrdnance
Ай бұрын
@@Tony-o1b actually this would be the very first time anyone has ever asked about hammer bounce when it comes to a inline valve also since this video was put out the hammer springs we now use are 55% more powerful than we used in this video
@Tony-o1b
Ай бұрын
@@AfricanAirOrdnance I can only imagine the group of people that want this kind of power wouldn't care about how much air the rifle consumes. POWER! POWER! POWER! LOL
@AfricanAirOrdnance
Ай бұрын
@@Tony-o1b 1200 foot pounds of energy will definitely use more air than 12 foot pounds and to get that you need a big spring to open a valve that produces 1200 ftlbs kzitem.info/news/bejne/kaJt04N8s3aeh44si=RTFipvkqEA_xjrex
@scottbolden1
4 жыл бұрын
Do you have any printed instructions on changing the hammer and spring?
@christophercullison9644
5 жыл бұрын
Are you putting the big piece of metal in then spring then tuner wheel?
@jonathanstaley3883
4 жыл бұрын
Thanks for the video guys. Just a question about dry firing it without the valve in place. Is it only with the upgraded spring that this happens? I dry fired my texan a few times with the factory hammer spring whilst I was rebuilding mine after shipping it seemed fine to me after working the mech from cocking to safety off and trigger pull to see that the me h was working properly before replacing the cover, trigger guard and pistol grip. Now I’m concerned I’ve damaged it...
@AfricanAirOrdnance
4 жыл бұрын
I would be concerned as doing this causes the 2 retaining screws to hit the hammer tube and they will shear off even on a factory set up
Jeremy King hey Jeremy quick question,, dose that shipping company Aman. Bring the product here or dose it get transferred to ups or FedEx when it gets to the us ,, or do have to pick it up some where???
@AfricanAirOrdnance
7 жыл бұрын
Should be delivered to your address you can track it at www.aramex.com
@AfricanAirOrdnance
7 жыл бұрын
Sorry Keven not sure if its taken over by Fedex or UPS
@henriquemarques5746
4 жыл бұрын
457cal valve big bore artesanal projeto
@khanhduong1998
3 жыл бұрын
Gửi cho 1 e đi
@mailsonsouza6465
2 жыл бұрын
Wattsapp ?
@AfricanAirOrdnance
2 жыл бұрын
email africanairordnance @gmail.com
@maikolpinto1155
11 ай бұрын
Hello, I have a Texan Cal 357 rifle and I only hunt vermin on my farm. I would like my rifle to shoot 80g JSB pellets at about 750 to 800 fps. What do you recommend to achieve this?
@AfricanAirOrdnance
2 ай бұрын
Such low fps for a 80 gn pellet on a stock Texan just fill your gun to 150 bar should hit those numbers easily
Пікірлер: 41