Paintshack, the owners of this newly built warehouse, wanted to ensure the walls did not suffer from shrinkage cracks as the new building settled. When using traditional gypsum plastering methods with new builds, this can be an issue, particularly where plasterboards join. After a period of time cracks can appear which need to be cut back then filled and redecorated.
The main concern with this new warehouse was that the walls were going to have permanent racking constructed in front of them. This meant any future repair of the walls was going to be difficult to achieve without a substantial amount of upheaval. They needed a solution, which would last and not need to be redecorated shortly after installation. They also wanted a product that could be applied and dry quickly as they were on a tight schedule and needed to get the job completed. The decision was made to use spray filler combined with a special fibre fleece, ideal for smoothing rough surfaces and bridging shrinkage and drying cracks on interior walls and ceilings. Perfect for that: the WAGNER PlastCoat HP 30
In this guide, we show all the steps to apply filler with fibreglass fleece:
► Click here for the guide: yt.wagner-group.com/filling-g...
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
00:00 Intro
00:11 Plastcoat HP 30
00:15 loading machine
00:37 Mask off areas not to be coated
00:44 Spray plaster/filler material
00:52 Hang Fleece onto wet plaster filler
01:05 Smooth filler
01:12 Cut fibreglass fleece
01:48 Apply second coat of filler/plaster
02:05 Job done!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
► For more information please see www.wagner-group.com
► Subscribe to our channel for the latest videos: / @wagnercontractor
Негізгі бет Ғылым және технология Airless spraying filler with fibreglass fleece onto walls using the WAGNER PlastCoat HP 30
Пікірлер: 2