Dog, your spoiling us with a 24 min long video. Soon enough people are going to start asking you for a HPA build.
@NegativeAirsoftTech
2 жыл бұрын
oh they do...
@Memesoft
Жыл бұрын
hpa users dont have that long of an attention span
@gundog39
13 күн бұрын
That Jethro impression made me smile, god rest his soul. "That bloody Penberthy" 😂
@markmathisen3908
5 ай бұрын
Is anyone else just a little uncomfortable that he's THAT good at imitating Karens and comment trolls?!?! 😂 I swear that, in my daily life, every time I hear someone whine anymore I hear Neg's mock version in my brain and I bust out laughing. PS, yes, it does get awkward trying to explain why you're laughing your ass off while they're winging! 😂😅
@DukeReynolds
2 жыл бұрын
Love the videos. New to airsoft. Bought an “evil” Krytac for my first gun. Figured I wanted something that just worked. Been happy with it but now wish I would have bought a CYMA or Specna E. Picked up an A&K ACR CQB for my first “project” gun. Infinity 30k (warhead was OOS). Lonex compression (type 2 cyl). 13:1 EMG gears. Perun V2 hybrid (front wired). M120 variable wound spring. Running a Titan 11.1 3000mah 16C. Couple questions for the comments crowd if anyone has time for it: Worried about the Lonex piston on these gears (blue with 10 steel teeth) the pickup is plastic. What do you guys think? It’s short stroked to 12 teeth on the sector so wondering if I should have gotten the type 3 cylinder? Is it a big deal? How in the unholy Rob Zombie hell do you shim the bevel to pinion (motor height) without a removable grip motor housing? Shim the box for gear to gear then just adjust the motor by sound and hope it’s got “good enough” pinion to bevel engagement?? If anyone reads all this dribble, thanks for any suggestions!! Chris- Arkansas, USA
@toobroke9236
2 жыл бұрын
Hey bro, for motor height, there should be a screw that stands out from the others you can loosen or tighten until you find the sweet spot (I would recommend reading up a bit because I’m not 100% sure)
@sergiomingo9927
2 жыл бұрын
I'm sorry to say the pickup tooth of that piston is gonna break sooner rather than later. You´re running a pretty fast setup, and since it´s short stroked the amount of force each indiviadual tooth has to stand is a bit more than what's standard.
@DukeReynolds
2 жыл бұрын
@@sergiomingo9927 thanks for your input. I went ahead and finished the buildout. Working great so far. Getting 30 rps at 315 fps on 28g BBs (bigger spring coming looking for 335 fps). I have another full metal rack piston on hand ready to go…just incase!!
@ruslandramchev3126
2 жыл бұрын
Hello theree, That 16C on that motor with that Mah of 3000 has decent chance to burn your battery. Since the motor is good by itself, you'd rather want to change one of two things. Either take a lower Mah battery or even better. Take a higher C raing one. 30C should be safe even if you decide to break your finger on semi
@K5_RC
Жыл бұрын
@@ruslandramchev3126 not really true. Mah has no effect on the gun. It's just the gas tank. It can be 6000 mah and it will perform the exact same as an 1100 mah. The C rating should stay 15-25 on stock AEGs or risks harming the MOSFET or fuse way too soon.
@MercutioUK2006
2 жыл бұрын
I've always wanted an SR47......damn it Luke. I have a short dot sat here too... My wallet is in protective custody.
@1a3ez
2 жыл бұрын
I’m looking forward to seeing what you do about the krytec and making it quieter. Also I love your vids!! They are hilarious and very knowledge full!
@jhqtech
2 жыл бұрын
Everyone hates the mosfets but damn if cyma platinum isnt a great gun. I wish they'd do a platinum ak line
@asher8085
2 жыл бұрын
Their High Speed line is essentially the same gearbox minus the mosfet. I might pick up an AK74u myself so I can sell the cyma standard one I have already
@whale259
2 жыл бұрын
@@asher8085 and they’re cheeeeap!! Beware of those cross section bushings though getting aftermarket to fit in their place can be tricky
@SPairsoftAKSP
2 жыл бұрын
Taiwangun announced a Cyma Platinum AK today.. But its not your typical AK, its a polymer Israeli-Nigerian AK
@Klaudett
9 ай бұрын
tyskie moment
@looneyirish007
Жыл бұрын
I cant get enough of this channel after coming across it a good while back, one of the best on KZitem and 1 vid i watched had me subbed. The accent, the knowledge, the bad language, its a complete package that others can't even come close to. You're a natural, pal. Shame its UK only, as Dublin isn't that far away. 😂
@98DemonZ28
8 ай бұрын
I feel like you're not being negative but being brutally honest. Should have called your channel brutally honest airsoft. Lol
@Vennetherblade
2 жыл бұрын
Honestly fucking love your videos, your videos give all the information I need about airsoft guns. Top quality content. Can't forget to mention your amazing taste in music
@david40k
2 жыл бұрын
Would have liked to see more information about this fix. Is it just a ZCI bevel gear and a motor that has a different pinion gear?
@NegativeAirsoftTech
2 жыл бұрын
Pretty much, I found the G&G Ifrit gives the quietest gearsound in a Krytac
@darylobey8867
2 жыл бұрын
That mk47 is lacking in semi and full and its brand new :/ ? My mk18 krtac build is old as fuck bevel gear was the only thing i replaced and the old ass motor still running used 9.6 on it and 7.4 lion i dont meed a stupid fast semi or full auto but my krytac hasent had issues with both lvoa front on and mk18 barrle and rail installed 9.6 or 14 to 16 it shots about the same range wise but iv seen shit krytacs out the box broken or not working so i know at times every krytac can lack alot of things andmother times like in my case never jad to do shit but replace a gear and tryed a max that dosent work in krytac yet it works perfectly fine
@NegativeAirsoftTech
2 жыл бұрын
Like I always say - a v2 gearbox, needlessly re-engineered to be fussy with parts that doesn't break but is adaquate at best for £200 more than most aeg's that are better out of the box.
@taff1538
2 жыл бұрын
Anyone who can bring a bit of Jethro into a vlog, is okay in my book.
@TBudgetAngler
2 жыл бұрын
once u go cyma platinum u cant go back especially if u buy it overseas and get it way cheaper
@MASSARMS3
2 ай бұрын
CYMA's sound great out of the box!
@bogdan192
Жыл бұрын
That XM build needs a VN style mag
@KnjazGromowladny
6 ай бұрын
Hi. Music is ok, but for guys like me, is sometimes hard to understand you when is so loud. Even with your nice English accent. Sorry for being noob.
@NegativeAirsoftTech
6 ай бұрын
Ah well, you'll survive. I'm not a normal channel, I'll do shit to annoy you
@lennethzvalkyire723
2 жыл бұрын
As a Cornish man, i approve of the accent!
@RA75AK
2 жыл бұрын
Note to self: test pinion gears in vice *before* installing onto motor.
@stufftodo5718
Жыл бұрын
8 minutes in and NO TWAT yet wow lol
@deagsairsoft
2 ай бұрын
I don’t even use aegs and I want one 😂
@feral3556
2 жыл бұрын
KRYTAC I’m fuckin proud of ya, don’t lose the spring and bearing under the selector gear like my dumbass did twice. I found her sweet spot for shims, threw in (you can hate me) a gate Titan, and tienly 35k, and she been good to me
@K5_RC
Жыл бұрын
Krytac has done me nothing but good, but I don't upgrade. Mine has been stock for almost a year with 0 problems on the field or plinking. Love mine. It's so fun to see Neg bash them though, I enjoy his shit talking 😅
@whale259
2 жыл бұрын
“Command” loll all I could notice when I received one, absolutely great other than that tiny detail which is obviously for a reason, the color and finish on the body looks fuckin great
@Kraeh667
2 жыл бұрын
I'm pretty happy with my Cyma SR47. In Germany you get a retailer specific ETU(not as fancy as a Gate Titan, but totally fine) instead of the Cyma one and all I had to do was changing the hop rubber. Rest ist perfect for 300,- €.
@gentlemanviking9389
8 ай бұрын
Krytac QC is trash now.
@MDDwarf
2 жыл бұрын
Epic intro
@St_Mindless
9 ай бұрын
That Krytac sounds the same as my Ares Honey Badger 😂😂😂 it's not a pleasant noise
@DonCarlione973
8 ай бұрын
I can't believe how that krytac sounds straight out of the box! It does look pretty fukn mean though! Nice choice in style 🤙🏼
@ADDERAIRSOFT
2 жыл бұрын
First and second gun were Krytac an only reason I bought them was because that’s what “everyone” said to get. so I bought a LVOA then a Vector and god do I wish I would’ve just bought a CYMA PLATINUM
@danmclean7375
2 жыл бұрын
14:10 🤦♂️Oooof!! That sounded just like my Raider1 out-the-box. And that thing was cheap.
@michaelm3300
2 жыл бұрын
Is the nozzle you replaced with just standard v2 M4? I have a platinum MP5 with some mods to it snd I wasn’t sure putting in a 22.25 nozzle would do the trick.
@DrunknBraindead
Жыл бұрын
sadly you never pulled the trigger so we won't know how it sounds like after your work on it
@mzjango
7 ай бұрын
Man I love the little Rambo jingle in the Carloco opening, NAF* *Nostalgic as frog
@berzerkinglemur6534
10 ай бұрын
Tyskie! God damn it, try Perła!
@NegativeAirsoftTech
10 ай бұрын
Please..... Perla Mocne & Karpackie are my all time favourites.
@Lozart
2 жыл бұрын
Is that the EMG Helios Licenced Cyma XM177? I thought the standard one came blank (no trades).
@apathtrampledbydeer8446
2 жыл бұрын
Me mate dave sprays insulation foam inside the body of the gun, works fine, very quiet. No need to be fancy, it's not a gun for the Queen!
@marcusnykvist5216
2 жыл бұрын
Hey neg, since you've been inside and outside pretty much every gun on the planet so you know a compatible upper with a golden eagle mcr lmg lower? I've tried looking for metal uppers but can only find plastic ones that won't work.
@sithknight7740
Жыл бұрын
Since you shit on Krytac's, what's your opinion on their rotary hop up unit?
@pallaszlo7976
2 жыл бұрын
I have cyma 077c. Just stock replica. And work great.
@Ultra-Collector
2 жыл бұрын
Couldn’t tell what your water mark was! I can only imagine…
@ianaumy
2 жыл бұрын
What a beautiful gun, thanks for saying zci rotary, I’m gonna be putting one in my cyma platinum Daniel Defense M4a1
@c.j.griffis2101
Жыл бұрын
11:12 I’m dying 🤣 Awesome how you keep teching vids so entertaining. Cheers from a fellow tech!
@Bracker1-9
2 жыл бұрын
Awesome video, I just took apart my platinum v2 and the piston head is scratching the cylinder. It is only on the bottom and is scratched the entire travel of the piston. I was hoping for some insight.
@disillusionedone9282
Жыл бұрын
Mate, Skylar is gonna have issues 😂😂😂
@andrewwood8706
Жыл бұрын
not thinking nowt bro, you have to do what you have to do
@callsign_armistice7168
2 жыл бұрын
13:00 pfff nowadays all the cool kids run their mags on 11.1s
@DeadPool-qb6qf
2 жыл бұрын
Honestly the Krytac sounds worse than the off screen dremel
@grin9794
2 жыл бұрын
Is the krytac stock still available or did somebody else already bought it off ya!
@ALEX-xd7ko
2 жыл бұрын
Wait so the warranty is void if you change a bucking . W.t.f
@mattmuttley
2 жыл бұрын
M4 style gun with AK style mags.....is that an ARAK?
@mucke7907
2 жыл бұрын
Man, you sure know how to trigger people with your meme builds XD
@renumihai5263
2 жыл бұрын
Gordon Ramsay intro: "fkng hell, look at that !"
@brokencreationlordmegatrol3037
2 жыл бұрын
please put some squid grips on that hand guard it would look really cool
@pablo-xf3jb
2 жыл бұрын
Angry Skylar voice is funny.
@error262
2 жыл бұрын
Cyma Platinum CM093 is the same thing as that Krytac BUT 2x cheaper (and doesn't have that fancy handguard).
@cheild2763
2 жыл бұрын
what xm177 handguard did you use?
@SupremacyDealer
2 жыл бұрын
can I get the name of the handguard that the cyma needs?
@MegaEghi
Жыл бұрын
Tyskie beer a good choice 👍😉!
@danielk9906
2 жыл бұрын
I got one xm, and its so good, miles better than my previos g&g combat machine
@S4Tony3.0T
2 жыл бұрын
That’s impressive for a 7.4
@callsignjuggs5248
2 жыл бұрын
Know your gona wonder wtf when you get to mine
@kanggesruk1622
2 жыл бұрын
Oh you are into retroism lol
@nicksenkovs1525
2 жыл бұрын
What Krytac did you get? A Vector?
@opasan117
5 ай бұрын
Tyskie, Mans a spoons warrior
@rodrigocabral4747
2 жыл бұрын
Where i got the hand guard?
@Pixelponny
Жыл бұрын
OK. Where did you get the slim handguard for the XM177 and where can I get it. This is a serious and urgent question and I'm drunk
@NegativeAirsoftTech
Жыл бұрын
My bum. I have more
@Pixelponny
Жыл бұрын
@@NegativeAirsoftTech Any for sale? Are they G&P ?
@rowankunz-peek9052
2 жыл бұрын
Do you have any idea what makes G&g m4’s and guns in general sound like dying cats?
@danmclean7375
2 жыл бұрын
That "screaming RC car sound" likely a cheap motor putting in a lot of work.
@ReportedPerson
Жыл бұрын
The best sound aeg ever❤
@kalm1531
2 жыл бұрын
Give you 3,50
@solo636
2 жыл бұрын
Quality content mate.
@danidiper666
2 жыл бұрын
How do you guys get de markings on the cyma xm177?
@MrMister_
2 жыл бұрын
Custom laser engraving.
@MButler23
2 жыл бұрын
Where can us mortals get that slim Handguard from 🤔
@GTChucker86
Жыл бұрын
Well here in the philippines we got plenty of spare E&C parts for sale, particularly the XM177 slim clam shell hand guard. When it comes to metal recievers and classic “bakelite”/polymer handguards E&C are pretty good for the price
@damo1297
2 жыл бұрын
Sounds amazing 🤩
@Archiballd123
2 жыл бұрын
TYSKIE greatings from Poland
@NegativeAirsoftTech
2 жыл бұрын
cześć
@maggotfor666
2 жыл бұрын
What’s the cost you charge to quieten a krytac?
@NegativeAirsoftTech
2 жыл бұрын
Bum love
@ewanjones5591
2 жыл бұрын
What model is the Carry handle cyma?
@MrMister_
2 жыл бұрын
CM.009E is the model name
@yxngubxy4452
2 жыл бұрын
nitty teef
@kritas9432
Жыл бұрын
Where did you get that slim handguard? I ve looked nearly everywhere
@NegativeAirsoftTech
Жыл бұрын
I have them
@kritas9432
Жыл бұрын
@@NegativeAirsoftTech for real ? Do you ship to greece ?
@NegativeAirsoftTech
Жыл бұрын
@@kritas9432 yes, email me
@ikharus1
2 жыл бұрын
100 pounds for a full change like this real time no edits, full recording
@ikharus1
2 жыл бұрын
what exactly did you add at 10:00 ?
@ikharus1
2 жыл бұрын
please
@Sephiroth391
2 жыл бұрын
Hey Luke, I Want to buy sr25/m110 AEG with v2 long, any suggestion which one to get?
@MrMister_
2 жыл бұрын
There are only 2 SR25s that have v2 long and that's Classic Army and A&K. Both are basically the same since A&K copied CA.
@Sephiroth391
2 жыл бұрын
@@MrMister_ I believe there is also Cyma but that uses 2.5 with proprietary mounting so I would be locked in with their gearbox if that manages to crack
@MrMister_
2 жыл бұрын
@@Sephiroth391 Huh, never heard of the cyma one. Sad that it's proprietary, otherwise that could've been good.
@leobates8783
2 жыл бұрын
Much Respect. Great builds
@vyl-za
2 жыл бұрын
Ah man, who sells those slimmer handguards? I haven't seen them about
@NegativeAirsoftTech
2 жыл бұрын
I have one set left....
@AlbertoMuse
2 жыл бұрын
buy a real one and mod it to fit
@planetcaravan2925
2 жыл бұрын
Brownells
@clockwork6966
2 жыл бұрын
where do you put stuff up for sale?
@NegativeAirsoftTech
2 жыл бұрын
On my website or FB.
@clockwork6966
2 жыл бұрын
@@NegativeAirsoftTech cheers!
@SiliconeSword
2 жыл бұрын
When it comes to the nub, barrel, bucking and chamber, what are the characteristics that you think lead to the tightest groups/best accuracy? I've experimented with a ton of different buckings and R-hop styles as well as barrels and barrel improvements in a few different guns, and I'm still not quite happy with my results overall.
@sterkriger2572
2 жыл бұрын
Don't forget that its a airgun firing a plastic projectile. BB weight must be taken in consideration too, 0.28 and up is you best bet of having consistency
@SiliconeSword
2 жыл бұрын
@@sterkriger2572 I should have specified, BLS, Novritsch, or Geoff's at .45g+
@MrMister_
2 жыл бұрын
@@SiliconeSword Round projectiles or BBs are inherently inaccurate. That's why you never see them in real guns or competition airguns. Unless airsoft moves away from BBs to pellets, which is highly unlikely, good accuracy at range isn't going to be easy to get sadly. Accuracy is based on consistency so to build an accurate airsoft gun you'd need to make sure the BB moves the same way through the system every time. This would be really hard to do and pretty much impossible since the BB can engage in different places in the hopup every time for example. If you want to get decent accuracy in an AEG for cheap I'd recommend maple leaf barrels and buckings, especially the diamond bucking with an omega nub. That one is doing wonders for me. Just don't have too high expectations of accuracy when it comes to airsoft.
@johnmcpudding857
2 жыл бұрын
@@MrMister_ Besides, building the gun to be ''accurate'' is a fools errand if you are nonstop fingerfucking the trigger that making sure not a single shot is properly aimed. God forbid additional 1m/s blow of wind if playing outdoors, or a blade of grass in the way, or not having a rock steady stance..... Hitting human torso sized targets is plenty enough at least IMO, especially for AEG's.
@MrMister_
2 жыл бұрын
@@johnmcpudding857 Yep, pretty much summed it up there.
@BallewBlade86
2 жыл бұрын
Dammit now i want to put that fixed stock on mine! I agree Krytacs sound terrible in stock form, but overall they are great guns as far as fit and finish goes.....performance is meh
@lebeau22
2 жыл бұрын
I got a Cyma 041G (mp5 platinum) and it came with the exact same gearbox (excep for the "windows" in the piston rail). Safe shitty safe lever with the screw trough the gearbox, the same screwhole for the trigger overextended (i didnt drill it, i make bigger the hole in my new trigger), the same blue plastic nozzle, same piston... all the same. The trigger unit, hold 2 months until the plastic switch broke, thats why i change it for an jefftron with active break. The cutoff lever didnt work until i figure the screwhole of the gearbox is overextended. Even with the shitty trigger, 230€ for the replica worth it every penny. And a good training for the first gearbox i opened XD. (sorry in advance for my english, isnt my native)
@rogerborg
2 жыл бұрын
I assume the selector switch is now: auto / semi / is-it-safe.
Пікірлер: 151