Guarder slide,stock nozzle.maple leaf hop 70degree bucking barrel is 6.00 nine ball power barrel 5.1 in a 4.3 tm hi capa, airsoft master piece nozzle housing using 130 springs with 2 cowcow red buffers and a aip spring guide plug.
@eddiecamden1700
3 жыл бұрын
Dope gun. Great video. Glad I stumbled onto this channel
@odb.airsoft
3 жыл бұрын
Thanks for showing some love bro!
@snazzycat5373
2 жыл бұрын
yo. this is inspiring af. ima go play airsoft for new years now. thank you and i love you guys
@odb.airsoft
2 жыл бұрын
Ayyy thats lit! 🤙🏽🤙🏽🤙🏽
@yasa122
3 жыл бұрын
ODB BACK AT IT AGAIN!!!
@knightairsoftwarrior
2 жыл бұрын
With the threaded outer barrel adapter you can run a 5.1 length inner barrel this is a good set up I run with a 4.3 hi capa with retaining the same fps as a 5.1 hi capa, thats if your strictly running a 4.3 slide and outer barrel with adapter
@knightairsoftwarrior
2 жыл бұрын
When I build another 4.3 hi capa I will get a threaded adaptor, 4.3 outer barrel, and the 5.1 6.00 power barrel from nineball that would be my ideal upgrade first
@odb.airsoft
2 жыл бұрын
I use a mk23 barrel (133mm) in my 5.1 so i do the same. Helps a lot with range and fps.
@benwilkinson7849
3 жыл бұрын
looks dope, wish airsoft was legal in australia, would be awesome to do something like this
@odb.airsoft
3 жыл бұрын
Thanks bro. Ive been seeing vids about how austrailias banned it because of there technical definition of “firearm.” Sorry brother. You can still do gel blasters i believe although i know it aint the same. 😐
@NexusBladeGaming
2 жыл бұрын
@@odb.airsoft Nope those got banned too. Poor guys
@odb.airsoft
2 жыл бұрын
Thats terrible man.
@benwilkinson7849
2 жыл бұрын
@@NexusBladeGaming legal in QLD pretty much illegal everywhere else
@Siggysauerr420
3 ай бұрын
sick video brotha
@bryamavila1496
3 жыл бұрын
Bro this shit looks NASTYYYY! Great video ! Becoming a fan lol
@savagescat392
3 жыл бұрын
Great video !! Very informative !!
@djshyproductions
3 жыл бұрын
dope vid man!!! got yourself a new subscriber!
@odb.airsoft
3 жыл бұрын
Awesome man thank you! 🤙🏽
@lstnchrstn
3 жыл бұрын
WHO DO YOU THINK YOU ARE!!!?? I AM!!!!
@alexal1232
3 жыл бұрын
Hey, if you want a nozzle that gives you a great air seal, try the guns modify one (not the winter version). With an aip 140% nozzle spring it stays in the hop up chamber until the end of the travel
@odb.airsoft
3 жыл бұрын
Definitely have to try that out! Thanks for the recommendation
@benjayremata2203
3 жыл бұрын
Nice gun
@odb.airsoft
3 жыл бұрын
Thanks bro 🤙🏽
@adelcamansa9371
2 жыл бұрын
Sana all may ganyan ako kasi wala hahaha
@thatairsofter7886
2 жыл бұрын
Cool but I wish you did a before and after shooting.
@mpeesofficial4230
3 жыл бұрын
can u share how much the gun worth im here in the philippines its my dream to have one but as of now my budget is tight thats why im using only we tech 4.3 hi capa stock and i want to invest more expensive and i have idea to buy one by one of parts im so happy to watch this video because its my dream pistol to build🥺🥺🥺
@odb.airsoft
3 жыл бұрын
That gun is probably worth 700-800 dollars. The most expensive part was the 4.3 hi capa as a base. We tech is still good bro. Use what you got to improve your game and save up for your dream capa. Lmk if theres any other way i can help. Maybe i can even send you a part or 2.
@Brooklyn_Hit
3 жыл бұрын
Shout From OG The Hi Capa Dapa Don. Owner Of B-Ville Pink Diva. Great Games at 53 in Brooklyn. I couldn't Make It Strikeforce Delivery Issues of Part for my AEG and My Hi Capa's Hope to See you again at 53.
@odb.airsoft
3 жыл бұрын
Def gonna go next tuesday for sure. Gotta have the 2 pink capas running together again. 🤙🏽🤙🏽🤙🏽
@djs_spot
3 жыл бұрын
My godddddd this is so GOOD!
@maymay-qx9yt
3 жыл бұрын
nice build man, been looking for a hi capa built for my first one. fell in love with this, i think ill use airsoft masterpiece pink limcat ones.
@odb.airsoft
3 жыл бұрын
Id love to see that! Pink just looks good on capas man lol
@maymay-qx9yt
3 жыл бұрын
@@odb.airsoft pink looks good and in my town field (jakarta) some has same kevin T union virus gold plague build xD dont wanna get swapped xD.
@odb.airsoft
3 жыл бұрын
Yeah virus’ build is a staple in the airsoft community lol
@maymay-qx9yt
2 жыл бұрын
@@odb.airsoft finally done bro its not a pink nasty, more like blackpink coz the base hicapa is black. same am infinity slide combo maple leaf chamber 5ku tornadobarrel cowcow pinkmood 60 maple leaf buck muzzle thread lock is from 5ku goldouter barrel muzzle lock (my g17 outbar muzzle) ssp1 mag (love the anti leak sealwhen i charge the gas) the magwell (pending) rest pending.... (no stock in country)
@odb.airsoft
2 жыл бұрын
Sounds pretty nice man 🤙🏽
@justinfpv2610
3 жыл бұрын
nice
@odb.airsoft
3 жыл бұрын
Thanks man. Thats my baby. Lol
@loganthompson3398
2 жыл бұрын
Yo, I always see these high capa builds, but I really want the g18c and to deck that out. Not a lot of resources I could find online about a speedsoft or custom one, maybe a video idea!
@Arbigale
3 жыл бұрын
🇵🇭 represent☺️☺️ love the build bro
@odb.airsoft
3 жыл бұрын
Salamat pare! 🇵🇭🇵🇭🇵🇭💪🏽💪🏽💪🏽
@Arbigale
3 жыл бұрын
@@odb.airsoft thanks bro, what do you suggest I can upgrade on my EMG DVC 2011. Pretty much Armorer Works OEMed this but I want more FPS since I do Action Air, thanks bro.
@odb.airsoft
3 жыл бұрын
Work on the air seal and tighter bore on the barrel. Will help with fps. If you can make the barrel a bit longer too that would help as well.
@julianspielberg5844
2 жыл бұрын
Yooo i play on the same field as you thats sick man. Great build love the looks keep it up bro
@odb.airsoft
2 жыл бұрын
What field? And thank you 🙏🏽
@julianspielberg5844
2 жыл бұрын
@@odb.airsoft Strikeforce, the one in the video. Last time i was there i had an altercation with someone refusing to call their shots. He had been cheating all day so i just kept shooting and he didnt like that. Ive noticed most people over there dont like to call their shots but hey what can you do about it🤷♂️
@odb.airsoft
2 жыл бұрын
@@julianspielberg5844 You just gotta play the game the best YOU can. Cheaters always cheat. Better to let the refs know than to get worked up over someone who doesnt understand the honors system. Ive been more focused on just enjoying the game. Wouldnt pay mind to the cheaters. It is what it is. 🤙🏽🤙🏽🤙🏽
@julianspielberg5844
2 жыл бұрын
@@odb.airsoft Yessir, ill keep that in mind thanks man
@davidterracotta4659
3 жыл бұрын
Ok with the braids. 👀
@odb.airsoft
3 жыл бұрын
Shout out to krysta! She always does my hair right. Lol
@dannyfarrell8379
2 жыл бұрын
Hey man! Would you recommend upgrades the lower receiver to the Airsoft Masterpiece one, also would you upgrade the hammer and seer set for the gun aswell?
@odb.airsoft
2 жыл бұрын
I always use the gun as is and if i feel i need the upgrade then i go for it. But for me the goal is always to have my capas fully customized. AM lower frames are a solid choice
@skeeterrifficairsoft6112
2 жыл бұрын
I use a pink ppq when it doesn't break on me but I want to get into the hi capa game eventually
@odb.airsoft
2 жыл бұрын
Its a great platform. Primary or sidearm. 🤙🏽🤙🏽🤙🏽
@changnyc6747
3 жыл бұрын
OK!!! dope AF!!!
@odb.airsoft
3 жыл бұрын
Thanks broski 🤙🏽🤙🏽🤙🏽
@Wyhaq
2 жыл бұрын
Yeah, those laylax nineball mag releases are annoying with not having the internals. I did the same thing as you last time I used one. But in their defense, laylax nineball does sell a mag release internal kit
@odb.airsoft
2 жыл бұрын
I never knew that. Next time i buy one ill def have to buy that too. 👍🏽
@TitoSabbyPH
2 жыл бұрын
Are you a Kababayan? Subbed! Good Content!
@odb.airsoft
2 жыл бұрын
🙌🏽🙌🏽🙌🏽
@sonnsobek7633
3 жыл бұрын
Make more videos bro 👌🔫🔫 👌 Get like get coment on this ! Airsoft Beast sport ewer !
@timholahan4816
3 жыл бұрын
Hey bud what loading nozzle you like too run in your hi capa running the pink cow cow now and what too change it up
@odb.airsoft
3 жыл бұрын
Im a big fan of longevity so i like running aluminum nozzles but if not then gaurder nozzles even with just stock internals do damage! Lol 🤙🏽
@mattworley7043
2 жыл бұрын
Where did you find a 5ku 4.3 barrel never knew they made them for 4.3
@odb.airsoft
2 жыл бұрын
Theyre 5.1’s. Just used the 4.3 frame. 🤙🏽
@NosyAirsoft
3 жыл бұрын
love the vid man!
@odb.airsoft
3 жыл бұрын
Thanks bro 🤙🏽🤙🏽🤙🏽
@clayramus703
3 жыл бұрын
this is epic, do you have a parts list by chance? I'm working on getting parts for my build so i'm just wondering what you put in it.
@odb.airsoft
3 жыл бұрын
I dont have one on hand but if you dm me on insta ill make one for you. 🤙🏽🤙🏽🤙🏽
@clayramus703
3 жыл бұрын
@@odb.airsoft thanks bro, I will once I get some spare time
@cannonballbrad9522
2 жыл бұрын
With that speed trigger did you need to do any filing or Fitment to get it in? I’m using a stock tm lower
@odb.airsoft
2 жыл бұрын
None at all. Fit perfectly.
@xmvpete
3 жыл бұрын
🔥🔥🔥🔥🔥🔥
@ryenis
3 жыл бұрын
where can you buy hi capa parts? Especially 4.3 parts bc i cant find them anywhere
@odb.airsoft
3 жыл бұрын
I get my stuff from now full auto airsoft. You also get 5% off and reward points if you use my code : odbairsoft Dm me on insta if you wanna know any other spots.
@bcas
2 жыл бұрын
Hey ODB! Thanks for sharing your great video! Which hicapa do you recommend for a custombuild beginner? the tm goldmatch or the dor? Or the regular/stainless? Thanks man and keep it going!
@odb.airsoft
2 жыл бұрын
Honestly my personal preference is any 4.3 or a gold match. The rail attachment is the biggest advantage. And thanks bro 😎
@bcas
2 жыл бұрын
@@odb.airsoft thanks for your reply! Isn't it difficult to find parts for the Goldmatch? I heard that it has different dimensions.
@odb.airsoft
2 жыл бұрын
@@bcas not to my knowledge. Ive worked with every tm hi capa pistol and never had fitment issues interchanging parts.
@Hamziggly
3 жыл бұрын
First!
@triggerlo8216
3 жыл бұрын
how you do the stippling?
@odb.airsoft
3 жыл бұрын
Got it in my first video. kzitem.info/news/bejne/l4eZvq13cqNigZw
@Elnietolasole
2 жыл бұрын
Recommend pinkmood nozzle ?
@odb.airsoft
2 жыл бұрын
As long as you find the right o ring to fit it yes.
@MJFO600
2 жыл бұрын
Yo ODB, can you post the parts list please ?Thank you bro🙏
@odb.airsoft
2 жыл бұрын
Before the end of the day! 🤙🏽🤙🏽🤙🏽
@odb.airsoft
2 жыл бұрын
Just finished it. Sorry man i got caught up with work. Let me know if theres anything i missed.
@gaddamn109
2 жыл бұрын
What does it chrono?
@odb.airsoft
2 жыл бұрын
330-340 fps
@busterring3188
3 жыл бұрын
Dope vid broo. But thats not a cowcow mag release, that’s a none ball. 😅
@odb.airsoft
3 жыл бұрын
Youre absolutely right. Been meaning to put a bubble correcting it lol my bad to cow cow 😂🤣😂
@busterring3188
3 жыл бұрын
@@odb.airsoft ahahahav alll goood
@xmarkiexmayhemx2200
3 жыл бұрын
When he said smash bros I instantly thought Kirby but instead it was captain falcon
@odb.airsoft
3 жыл бұрын
I can rock kirby too but cmon man…CAPTAIN FALCON is a BEAST! Lol
@oBandrew
2 жыл бұрын
Anyone know if the guide rod with the spring in is worth it? is it much different to the original solid one?
@kaysonjones840
2 жыл бұрын
I got a nine ball heat gradation one and it’s tits, If you want a faster cycle rate and still have slide lock on last round, you should get it, but it won’t be as fast as one with bushings, kind of a happy medium
@odb.airsoft
2 жыл бұрын
I run the guide rod with the spring and 4 cow cow short strokes with a 140 spring. Super fast cycle rate. Between the two the difference is just personal preference honestly.
@oBandrew
2 жыл бұрын
@@odb.airsoft take it you have to use a 4.3 plug to make it fit easier then right? cheers for the help though man
@oBandrew
2 жыл бұрын
oh right thanks man, yeah i don't really care for the slide lock so might not bother
@odb.airsoft
2 жыл бұрын
You dont have too. You can unscrew the front half and put the spring in first With the back part of the guide rod and still use a 5.1 plug.
@browngxd9324
3 жыл бұрын
Hows that pink mood nozzle
@odb.airsoft
3 жыл бұрын
Honestly my take is 50/50. Working well with my build but a team mate did literally the exact same set up and 100 shots and it went down. Gonna tech it and see what happened. Will update you when i do.
@browngxd9324
3 жыл бұрын
Ok thanks for the info, heard the gaurder nozzle and AM lightweight housing is a good setup
@odb.airsoft
3 жыл бұрын
That nozzle goes well with the edge v2 housing too. Gonna use that set up on my next build.
@morijin6903
3 жыл бұрын
What tools are you using to take apart the screws? There realy small
@odb.airsoft
3 жыл бұрын
Im using a basic micro tool set off amazon.
@morijin6903
3 жыл бұрын
@@odb.airsoft does it break or strip?
@odb.airsoft
3 жыл бұрын
Do your best to be as gentle as possible. I also use teflon tape to help keep the screws in place and prevent them from loosening due to vibration of the gbb.
@morijin6903
3 жыл бұрын
@@odb.airsoft do you have alink or the name of the tools?maybe the size
@odb.airsoft
3 жыл бұрын
Cant find the exact one that i have but this should do Royace Small Screwdriver Set,Micro Tools,119 in 1 Screwdriver Kit Laptop Screwdriver Kit Tiny Screwdriver Set Laptop Tool Kit Electronic Repair Kit Torx Screwdriver Set,Iphone Tools Repair Kit for PC www.amazon.com/dp/B07TNS3D4X/ref=cm_sw_r_cp_api_glt_fabc_1GY2KMJ04VHXHPEHZZ45
@bluejumperskullman1584
2 жыл бұрын
you forgot the rainbow hammer my guy
@odb.airsoft
2 жыл бұрын
I needed a strut and a pin to install it so i never got around to it. Will do one of these days! 👍🏽👍🏽👍🏽
@bluejumperskullman1584
2 жыл бұрын
@@odb.airsoft ye I saw that almost immediately after I commented that's my b
@odb.airsoft
2 жыл бұрын
Nah youre good. I didnt remember if i mentioned it in the vid lol.
Пікірлер: 118