You should drop the 3 circle design on the front down to 2 circles and the 7 slats like the Jeep logo. Just a thought👌🏾👍🏾
@davidelgarico7036
6 жыл бұрын
Just saw this on JK Gear and Gadgets. Love it!
@vxplace65
6 жыл бұрын
ajt-designs!!!! Awesome key fob!! I received mine today in Army Green, it’s a perfect match for my Jeep!!! Big thanks to JK Gear and Gadgets for posting his video and helping introduce this cool little mod!!!!
@ChiefLilly71
Жыл бұрын
Got mine today! The Amazon key case was broken and didn’t work anymore. The key was screwed in and didn’t have the wings on the sides. I used a new razor and trimmed the closure plug so the key fit in it. I used Loctite Ultra Liquid Super Glue and glued the key in. That key is now dead and will not start the Jeep. 😂 the other one I bought was for a Jeep factory key and it’s awesome.
@ligon143
6 жыл бұрын
Great product. Hardest part was getting the key out of the Jeep key fob. Assembly was straight forward and easy. Black fob with red buttons and red screws. Looks awesome. Your key fob has been TRANSFORMED.
@jeffreydeutsch2157
2 жыл бұрын
Received today. Had some struggle with it “sandwiching” tight. I do not have the Start x2 feature however, using that button instead of the blank sealed it nice and now operational.
@gesooi3334
2 жыл бұрын
Set up my new fob for my JK and it looks great.....however, getting the metal key out of the old fob is not as simple as this video shows...the metal key in this video was already previously removed and a lot a lot more elbow grease is really required that is not being told....I eventually used a hack saw, pliers, and utility knife....don't be discouraged because the end result is terrific, but be prepared to work...
@cookinvic
4 жыл бұрын
I received my JK Jeep fob (the gray one) followed this video and it works perfect! Looks great too, really never thought about upgrading the fob but it’s something you actually use and touch every time you use the vehicle so you get to see it unlike my wheels I only see when I walk up. Cool design
@ChristopherOvrebo
5 жыл бұрын
Thanks man. I don't think I've ever bought an aftermarket product that fit together so well
@curtisfike
3 жыл бұрын
Just received the Wrangler JK Army Green fob and got it together !!! Love the feel and look !!! Great job guys !!
@danielsaudi9121
3 жыл бұрын
Awesome video.. Just got mine today and putting it together was so easy thanks to the Vid…No more faded Jeep logo for me… Can’t wait to order a 2nd for my spare..Thanks AJT Designs!!
@deuswulf6193
5 жыл бұрын
Warning: Some of the new aftermarket keys you can get here on amazon have changed slightly. The physical key part is no longer T shaped, but simply straight. Otherwise this product worked well.
@TDHobbies
5 жыл бұрын
I love my Jeep and not Chrysler fan, so I never like the factory key, this is perfect for me. I got it quickly in the mail, and the assembly was very easy, all the parts fit very well. I highly recommend this product and will buy another one or 2 so I can change up the colors when I feel like it. Great job on the design and video!
@MrDstegner119
6 жыл бұрын
Nice work.. 🇺🇸. Made.. OlllllO money sent!! Update received and install was super easy. Think ill get another
@raymondcarpenter9791
3 жыл бұрын
Wow is all I can say!!! This MOD gets 5⭐'s!!! Great Product, Great Video, and Easy installation!! #KeyFobMakeover
@nicksheets5141
6 жыл бұрын
Cool design. I wonder if you had a folding option to hide the key...maybe have it spring loaded like a VW key..if that could boost your sales?
@ajtdesign4440
6 жыл бұрын
No at this time, though we may at some point in the future.
@JeepYotaAdventure
6 жыл бұрын
Great suggestion! Regardless, I just bought two. Orange Crush & Gecko. Thanks! If you come up with a folding option, I'll buy two more.
@SH-kh4bq
6 жыл бұрын
agree, i would definitely buy it in that case. reduces the size of the key and makes it look more awesome imo
@agussio
6 жыл бұрын
Just got mine put together. Looks good. ( got colors to match my Gobi Recon ) Centers the key on my key ring. I like the blank for the key mount. I am also getting a basic transponder key so I can separate the fob from the key and make it even smaller in my pocket. Quality of the parts and the molds is good. Will definitely be buying another.
@MrIanstein808
6 жыл бұрын
Just got my AJT key fob! What a beauty! Quick shipping as well! Thanks AJT!
@ryanbatal5948
6 жыл бұрын
What an awesome idea!
@ajtdesign4440
6 жыл бұрын
Thank you!
@CharlesMartel676
5 жыл бұрын
And, you're a MICHIGAN BUSINESS!!!! I'm in!
@RJ-el8nb
5 жыл бұрын
Looking forward to getting a new key case for my 2010 Rubicon JKU
@rikdeschain2476
6 жыл бұрын
I dig this little mod
@MrIanstein808
6 жыл бұрын
Beautiful design!
@ajtdesign4440
6 жыл бұрын
Thank you!
@autotechnica
6 жыл бұрын
I got non metric screws with a metric allen key... aside from that install was easy.
@Wolf9326
5 жыл бұрын
I love you’re products!! but I see you have a preorder for just the key cover (no buttons) can you do a review on that?
@NYC-WRX
6 жыл бұрын
Just ordered mine in blue over the weekend
@Hondacbr600rrish
4 жыл бұрын
Just put mine together and its great.
@Austin225511
2 жыл бұрын
I just oredered one does the buttons suppose to be kinda hard to press and click
@SamKosel
5 жыл бұрын
I ordered mine on Monday! I’m excited!
@shaguardriver1
6 жыл бұрын
Looks better than the mini van key......
@agussio
6 жыл бұрын
Love it. With the key blank for the remote, have you tried keeping the key and the fob separate so the key is not at long? obviously the key would have to be replaced with a new blank so it has a ring.
@ajtdesign4440
6 жыл бұрын
Yes, I know this can be done. You can purchase a blank key on ebay, have it cut, and program the transponder yourself.Something like this for the key:www.ebay.com/itm/Pair-Transponder-Chip-Ignition-Car-Key-Replacement-Blank-for-Chrysler-Dodge-Jeep/221369434370?fits=Make%3AJeep&epid=1840914346&hash=item338aa58102:g:7owAAOSw9eVXVYI6Reprogramming:kzitem.info/news/bejne/tJ-DtKmdjmZmoI4
@billbraski2452
6 жыл бұрын
Hoping to win one!
@vextechnet5865
3 жыл бұрын
I can’t find it anymore. I’m tired of my cheesy stock key fob
@UntamedMotors
4 жыл бұрын
Subbed =]
@AntRocker
6 жыл бұрын
I just got home and install my key and swapped everything out it’s that easy
@tsteel80
5 жыл бұрын
Hey Adam, just got my fob in today and put it together along with you in this video. Thanks for the walk through. Looks awesome. But I ordered the black with red buttons and screws but my screws look more pink. Are they just faded or did I get the wrong color?
@tajsingh9769
6 жыл бұрын
Great product, can’t wait for mine to come in. Will you be making aluminum versions of these in the future?
@ajtdesign4440
6 жыл бұрын
Probably not. We did an aluminum version for the Tundra/Tacoma and it reduced the signal range of the fob.
@lcm7541
6 жыл бұрын
Are the key’s electronics waterproof
@ChristopherOvrebo
5 жыл бұрын
I fought with the utility knife for about 2 seconds then grabbed my 90 degree roloc wheel thingy and buzzed the key right out, no effort
@David-td4ik
6 жыл бұрын
thought it would be something like a switchblade.
@leeleelee43
6 жыл бұрын
My key fob doesn't have the hard solid buttons. Second thing, my key didn't come with the key delete part so it could just be a fob. Not happy at the moment.
@ajtdesign4440
6 жыл бұрын
Sorry about that! Please email adam@ajtdesign-llc.com and we will make this right for you.
@leeleelee43
6 жыл бұрын
@@ajtdesign4440 man it's no worries really. I took an old key that had hard plastic buttons in it and got it put together!!! Looks awesome!!
@ajtdesign4440
6 жыл бұрын
leeleelee43 if there were parts missing we would be happy to send them to you, again just shoot us an email at adam@ajtdesign-llc.com
@rjc_tmntfirehawk
6 жыл бұрын
Cool product, is there a way to personalize the buttons?
@ajtdesign4440
6 жыл бұрын
Sorry, there is not.
@silverapple2011
5 жыл бұрын
My key is flat and doesn't have that T shape. Will it still work?
@joerobinson7141
6 жыл бұрын
I just got my red key fob in the mail, and have run into a snag transitioning from my factory fob to the new one. Now that I have removed the key I am without the metal wings...that was on the bottom of the key in the fob. Is there still a way to install in the fob? It is rectangular shaped just like the rest of the key?
@ajtdesign4440
6 жыл бұрын
Please email us at adam@ajtdesign-llc.com and we can help you out.
@xbpbat21x
6 жыл бұрын
Pretty cool...can I get a red one with black buttons?
@ajtdesign4440
6 жыл бұрын
Yes, you can order that on our website! www.ajtdesign-llc.com
@joker-tp6re
6 жыл бұрын
Sweet
@Johnny-yr4rb
5 жыл бұрын
Is it waterproof? I have damaged a few fobs with water, want a waterproof one. Thanks
@ajtdesign4440
5 жыл бұрын
Same level or water resistance as OEM.
@user-ng2uq7gr6u
6 жыл бұрын
Can I buy it on Amazon in Japan?
@OmarAlhomsi89
6 жыл бұрын
Pretty mod for jeep jk
@AdventuresWithRyanHanley
6 жыл бұрын
you guys dont make a silver one );
@ajtdesign4440
6 жыл бұрын
Sorry no, we don't do anything molded in metallic colors, so silver-metallic = gray.
@yungpancho84
Жыл бұрын
I wouldn't buy ajt design again. I got vent rings and a key fob for my jeep wrangler. It's cheap plastic that wears quickly. Rings look worn and aren't even a year old and the key fob barely got wet and it ruined the whole key.
@Omerta_Pariah
6 жыл бұрын
Your too low, hard to hear you even with the volume all the way up
@ajtdesign4440
6 жыл бұрын
Sorry, I will try to get better. I don't make a lot of videos.
@Omerta_Pariah
6 жыл бұрын
AJT DESIGN LLC thank you. Very cool looking product, just pre ordered two for my JKU
@mattg8787
6 жыл бұрын
its cool and ll but for 30 $ its a not worth it to me
@deuswulf6193
5 жыл бұрын
Its worth it when you realize how much key fob replacement cost.
Пікірлер: 71