It seems when tying the knots on both verticals, you did not pull all the slack off, it is noticeable that the clamps moved after you released the base, thus losing a great deal of tensions on the mains. I would assume those slacks would slowly migrate to the mains near the center thus losing the tension in the sweet spot!
@markesposo6835
9 жыл бұрын
Impressive stringing skills! You killed it, Bro!
@ukslippy
11 жыл бұрын
And yet Yonex stringing patterns recommended 2 piece (4 knot) stringing!! 4 Knots doesn't make tension unreliable, unless you cant string properly. On the basis of this video, I'd say this is quality work; its planned, well thought through and methodical.
@mosesmatsuzawa3928
8 жыл бұрын
Why not make it 30+ tension if that is a racket of a pro?
@dtrinh1
9 жыл бұрын
Alan is a CHAMP stringer!!!
@johndoe-iq2wu
6 жыл бұрын
On the stringing machine..once you've locked the racket on its frame the shaft is then noticeably shaking if moved or touched. So as you're stringing it what happens if you accidentally touched or hit the base of the shaft or the holder or the grip as you're moving/rotating the racket in 360 degree horizontally? Will that 'ruined' or in anyway affect the racket?
@ichiban0808
11 жыл бұрын
very impressive!nice work!could you explain how you do the knots?thanks man!
@BadmintonCentralTV
12 жыл бұрын
watch it in 720p HD! very detailed! :)
@derockn00
11 жыл бұрын
one more thing to add is that single string knots allows the racket to lose its tension faster.
@atukamir3699
5 жыл бұрын
How can we identify wish pattern is suitable with racket
@derockn00
11 жыл бұрын
Use a cross string(where vertical meets horizontal) Thats all i can share, because the rest is my secret technique. The problem with most knots is that most stringers tie them on a single string grommet which does in fact ruin the grommet and the hole which results in a shorter life time for the racket. I have friends whose rackets broke in 2 years with standard single string knots. I have a customer with a 1996 racket that I strung over 35 times and it is still in prime condition with my knots.
@azadaliabbas
9 жыл бұрын
No idea bro. I believe it's badminton rackets as it's a discussion about badminton. Still waiting to see the videos tho.
@lesbleus6546
6 жыл бұрын
What is the difference between 2 and 4 knots? is anything of this better or worse?
@Tennis_MenACE
7 жыл бұрын
Can you string tennis rackets in this machine???
@driveslowly
6 жыл бұрын
Yes it can. Any racket
@BadmintonCentralTV
11 жыл бұрын
send me or post a video of your 13 mins string job on a crank. i'd love to see it!
@jacklowry98
11 жыл бұрын
real nice machine by the way
@daus.90
3 жыл бұрын
For the main string you should pull 2 at the beginning not just only one..the correct way u watch master halim stringer thats is the correct way to strung the racquet
@daus.90
3 жыл бұрын
kzitem.info/news/bejne/t3efuGh_h4N-lm0
@azadaliabbas
9 жыл бұрын
AK I need some advice on string tension on mains and crosses . Will FB message you if that's ok.
@zacgan1845
8 жыл бұрын
pro!! what tension would you recommend for an intermediate player btw? been learning about 2 years
@nhuang01
8 жыл бұрын
Do you not change tension on the cross string and when knotting?
@israelgefen6909
10 жыл бұрын
Pretty good and fast.It will be faster with Ektelon type Two point supports machine and Yonex or any other Double string clamp spring action clamps.The knots are quite extensive, i don't think they needed to be that elaborate.I.G.London
@driveslowly
6 жыл бұрын
Why would it be faster with the old eketelon crank machine? I have one and I don't like the clamp when clamps the last few mains. Tedious to use.
@brianbulla4942
11 жыл бұрын
So why is it that badminton stringers string a racquet where the mains finish at the bottom, and the crosses are done bottom to top, using two piece method. Why not just use one piece??
@dahliavdv
7 жыл бұрын
i love your shirt bro
@luiezasabello
11 жыл бұрын
kuya marunong rin pu ba kayong mag badminton higit pa diyaan sa ginagawa ninyo?
@xuweiwen
10 жыл бұрын
Is it better to have 4 knots or 2 knots?
@mnizarh
7 жыл бұрын
usually how long?
@budimanwidjaja8548
9 жыл бұрын
im use a voltric z f 2 with bg66. what ur recomended for tension n knot ? bro alan
@kevinluo8600
10 жыл бұрын
how do you get strings through blocked grommets so easily?
@jerryhellstrom30
4 жыл бұрын
You just lift the string a little from the inside of the frame...
@harshitkapahi9887
4 жыл бұрын
Sir please tell me how much clamps should be tight to grip tha gut?
@jerryhellstrom30
4 жыл бұрын
As little as possible..
@thoaitien00
11 жыл бұрын
my best at 19m , 2knots , manual stringing machine , yonex bg66 , 27lbs , i want a electronic machine for better time
@lenny01606
9 жыл бұрын
no prestretch?
@azadaliabbas
10 жыл бұрын
I think everyone would like to see the video of jerry hellstrom doing his rackets in 10 minutes if its actually true!
@vit4chan
10 жыл бұрын
26 lbs, that means how many kgs?
@BadmintonCentralTV
10 жыл бұрын
Việt Anh Phạm 26 / 2.2
@phanlinhkhuong
8 жыл бұрын
sau khi trừ đi sai số thì là 11.5 nha bạn. nếu bạn đem đến shop cầu lông ở vn thì bạn kêu đan 11.5 thì mình sẽ đan 26lbs. Hehe nhân tiện shop mình là ABC Sport ở Q7 nhé.
@detectoruser
9 жыл бұрын
Really good stringing video, not sure about the shirt ...
@yulschmid6639
9 жыл бұрын
😳omg !!!
@myduffly
12 жыл бұрын
what the fuck ^^ Thats incredeble i need nearly 50 minutes ;D
@beenathomas3672
10 жыл бұрын
I see you use two pieces of string for the mains and crosses. Wouldn't it be better to use one string and have two knots instead of four?
@beenathomas3672
9 жыл бұрын
ok, Thanks for the info.
@jacklowry98
11 жыл бұрын
the majority of ametuar stringers including myself do 4 knot and actually i find it extremely reliable so in ur face dude
@jerryhellstrom30
10 жыл бұрын
If i have put the main string in the racket before i put the racket in the maskine so best time for me just under 9min. Iam not proud of that. Iam proud of that i have string 150 racket in 3 days. I do easly 10racket in 3hour no problem. And now guys want videos. I can do when ever i want under 10mins with the main string allready in the racket. To put the string in the racket will take much under 2min.
@BadmintonCentralTV
10 жыл бұрын
Jerry Hellström show us a video or it never happened. :)
@inika1000
10 жыл бұрын
BadmintonCentralTV Do you guys still make new videos?
@akilazizan
5 жыл бұрын
Lol. This guy is everywhere criticizing other pro stringers or making proud claims about his work - but where's proof?? LOL. JUST LOL.
electric machine so slow..... i can do it in 13 min on a 1992 stringing machine with hand crank and tension spring, 2 knots, any string, any tension, any racket. I was on the Olympic Stringing team for the 1996 Atlanta Olympics, and on another stringing team for the 2005 World Cup in Anaheim.
@detectoruser
5 жыл бұрын
Was that when you won the gold medal in modesty?
@bobthehobo12341
11 жыл бұрын
fast forwarded?
@derrickng7702
11 жыл бұрын
Here is one. Read the Description! /watch?v=R7JVK4uxBHk
@chk0817137
12 жыл бұрын
People only noticed how fat he strung it...but the really whopper is the knot he did
@Danielrh1999
10 жыл бұрын
very very very very very very very very very very very very very very very FAST!!!!
@shaocong99
12 жыл бұрын
People wanted is quality not fast doing.
@Kurt007
8 жыл бұрын
I guess u could be even faster if you use a Lee ling machine
@Kurt007
7 жыл бұрын
Alan Kakinami yes, Li Ling is from China. But I tried it before is much quicker without strings getting caught and more human geometric. Plus don't need to do the loop thing anymore since they are designed like that. My best time on that machine is 20 mins. Normally needs 23- 25mins.
@johnkor
12 жыл бұрын
OMG SO FAST .... @@
@s4yJaiPau
12 жыл бұрын
so fast T~T
@jerryhellstrom30
9 жыл бұрын
Your stringin style are too wierd. I have use the same method over 20years now and no problem to make 17.5kg tension stringins.
@holisch
8 жыл бұрын
+Jerry Hellström who the hell is playing a badminton racket with 15kg+? No sane person would ever do that. Besides that, what should be weird about Alans stringing style? Looks pretty normal, but well rounded to me though.
@jerryhellstrom30
8 жыл бұрын
Well i can say that i do string also 18kg stringings. 15kg is quite common here in Finland..
@Rauthaz
12 жыл бұрын
Is your t-shirt from an LGBT support campaign? Sure sounds that way.
@otah6100
11 жыл бұрын
This is rubbish, who ties a 4 knot string. Normally people do it in 2 knot. 4 knot, they can reuse any string if they are long enough. And 4 knots make your tension unreliable.. Lousy but indeed fast
Пікірлер: 75